When your Giatsu air conditioner starts acting up, it’s likely trying to communicate something to you through its error codes. These codes are a form of self-diagnosis that modern appliances use to inform users about the nature of a problem or malfunction. Understanding what each code means can be key to determining the best way to proceed with a repair or maintenance.
In this article, we present a complete table of error codes for Giatsu air conditioners. Before diving into it, let’s clarify some concepts that might be a bit technical but are essential for a better understanding of what your unit is trying to tell you.
Error Codes: These are alphanumeric sequences that the air conditioner displays on its control panel or screen when it detects an internal problem. Each code corresponds to a specific type of issue.
Temperature Sensor: This component measures the air temperature in the room or inside the air conditioner itself. If it fails, the unit will not be able to properly regulate the temperature.
Electronic Board: This is the “brain” of the air conditioner, responsible for managing all the functions of the unit, from temperature regulation to fan speed. A failure here can affect multiple operations of the system.
Refrigerant: This is the chemical compound that circulates inside the air conditioner and allows for the cooling of the air. A leak or insufficient amount of this liquid can prevent the unit from cooling properly.
Now that we’ve clarified these concepts, here is the table of error codes for Giatsu air conditioners:
| Error | Description | Solution |
|---|---|---|
| E1 | The E1 code in the air conditioner points to a problem that is blocking the start-up, such as dirt in the filters. | Often, the appearance of this error can be resolved by resetting the device. If the problem persists, it is advisable to notify a specialist. |
| E3 | The E3 code usually indicates a voltage failure. | We must connect the air conditioner correctly to the power source. If it does not work, it is advisable to check the board and the motor. |
| E4 | The E4 failure of the air conditioner indicates an error or short circuit in the temperature sensor, which cannot detect the room temperature. | We must contact a technician, who will analyze the origin of the sensor failure. |
| E5 | This code warns of a lack of communication with the remote or electrical overload. | If it is an electrical overload, we must reset the air conditioner. In the case of communication failure, it is best to go to a professional. |
| E6 | The E6 code of the air conditioner usually indicates a failure in the internal ventilation motor. | Check the operation of the fan and review the electronic board that activates it with the help of a technician if necessary. |
| EC | The EC failure indicates that the refrigerant is insufficient or there is a leak. | Problems with the refrigerant should be solved with the help of a technician who checks the leak. |
| F0 | The code alerts of a blockage, which may be due to a leak in the refrigerant or an electrical overload. | If it is an electrical overload, the air conditioner must be reset. In the case of a leak, we must go to a repair technician. |
| F1 | The three failures indicate some kind of short circuit in the temperature sensor. | These errors can only be repaired by a professional. |
| F2 | The three failures indicate some kind of short circuit in the temperature sensor. | These errors can only be repaired by a professional. |
| F3 | The three failures indicate some kind of short circuit in the temperature sensor. | These errors can only be repaired by a professional. |
| F5 | The code indicates a failure in the ventilation motor or in the air conditioner’s board. | We must contact a technician to repair the air conditioner component. |
| P0 | This failure blocks the system due to the presence of an electrical overload. | In most cases, the problem can be resolved by restarting the air conditioning system. |
| P1 | The P1 code indicates both excess and lack of voltage. | We must turn off and turn back on the system. If the problem persists, we must check the connection to the electrical power supply. |
| P2 | This error warns of an excess temperature in the compressor head. | We must contact a technician who finds the underlying problem and performs the corresponding repair. |
Our Advice
When any error code appears, the first thing to do is consult the user manual of your Giatsu air conditioner, as it may offer specific solutions for each code. If the problem persists or you do not feel confident about performing any intervention, the most prudent thing is to contact a specialized technician. Remember, preventing further damage is always the best option.
Error codes in Giatsu air conditioning
Troubleshoot error code “P2” in Giatsu air-conditioning
Troubleshoot error code “P1” in Giatsu air-conditioning
