Connect with us
Find practical guides to diagnose air conditioning faults, decode error messages, and fix common breakdowns step by step. Each article helps you identify symptoms, understand the cause, and apply quick solutions to restore cooling faster. Ideal for split units and other home cooling systems when you need a clear fix without wasting time.
Error: “F0” Description: Overcurrent in the system. Cause: It can be due to various factors, from power supply issues to a faulty compressor. Solution: Follow a...
How to eliminate EC error in GIATSU air conditioning? Error: EC Description: Indicates the presence of a refrigerant leakage in Giatsu air conditioning units. Cause: Defective...
Error: “E6” Description: Failure in the internal fan motor or communication problem. Cause: This could be due to an error in the electronic board or an...
How to eliminate E5 error in GIATSU air conditioning? Error: E5 Description: This code warns of a lack of communication with electrical control or overload. Cause: Solution: If it...
How to eliminate E4 error in GIATSU air conditioning? Error: E4 Description: Air failure E4 indicates an error or short circuit in the temperature sensor, which cannot detect...
Error: “E3” Description: Voltage failure. Cause: Issues with electrical connection or internal components. Solution: Verify electrical connection and components such as the board and motor. When...
How to Remove E1 Error in Giatsu Air Conditioner? Error: E1 Description: Communication error between the indoor and outdoor units. Cause: Various, read below. Solution: Often,...
The unit is protected against excessive coolant temperature. These are the real causes and the key checks.
The antifreeze protection has clear causes and it is advisable to distinguish them before restarting the equipment.
The PP warning usually reveals a temperature mismatch or a probe failure in Ferroli equipment.
The P6 fault usually activates the compressor protection. These are its most common causes and what to check before calling the technician.
The P5 fault usually indicates a flow or pressure failure in the hydraulic circuit, and it is advisable to check several key points.