How to fix the F3 error in Fagor Dishwasher?
- Error: F3
- Description: Fault in the dishwasher drain
- Cause: Food residues clogging the pipe. Faulty drain pump. Issue with the water level control system.
- Solution:
- Check the condition of the drain pump.
- Observe if the drain hose is not blocked.
- Check the water level control system.
- Verify the drain pump and the plate.
Error
The F3 error in Fagor dishwasher categorizes it as a fault in the dishwasher drain, possibly caused by food residues clogging the pipe.
Description
When the F3 error appears in the Fagor dishwasher, it means there is a problem with the dishwasher drain. There may be food residues that are obstructing the pipe or the drain pump may not be functioning correctly.
Cause
The F3 error can be caused by several reasons. The first may be food residues clogging the pipe. The second cause may be a faulty drain pump. The third cause may be an issue with the water level control system (compression chamber) located on the side of the appliance below the water distributor.
Solution
Here is a detailed guide on how to fix the F3 error in a Fagor dishwasher.
Step 1: Check the condition of the drain pump
The first action to take is to check the condition of the drain pump. This is one of the most common causes of the F3 error. To check the condition of the pump, a specialized technician should dismantle the machine and verify if the pump is in good condition. If the pump is damaged, it must be replaced.
Step 2: Observe if the drain hose is not blocked
Another possible cause of the F3 error is a blocked drain hose. The specialized technician should check all the filters inside the machine and massage the drain hose in case there are residues of grease and detergent that are preventing it from passing correctly. They should also unclog the plastic piece at the bottom of the dishwasher on the left to check if there are any crystals or food residues that may be blocking the hose.
Step 3: Check the water level control system
The water level control system (compression chamber) located on the side of the appliance below the water distributor is another possible cause of the F3 error. The specialized technician should check that this system is not blocked or obstructed.
Step 4: Verify the drain pump and the plate
If the previous steps do not solve the problem, it is possible that the F3 error is caused by a problem with the motor or the plate. In this case, the specialized technician should dismantle the drain motor and plug it into 230V to see if it works correctly. If the motor works correctly, then the problem is likely with the plate.
The specialized technician should verify the plate for any signs of damage or defects. If any problems are found, the plate must be replaced. If no problem is found, the drain motor must be reassembled, and the dishwasher tested.
Step 5: Replace the drain pump
If it has been determined that the problem is with the drain pump, then it must be replaced. The specialized technician must identify the appropriate drain pump for the Fagor dishwasher model and replace it according to the manufacturer’s instructions.
It is important to ensure that the drain pump is installed correctly and that all components are in place before testing the dishwasher.
Step 6: Dishwasher test
If everything is working properly, the dishwasher will be ready for normal use. If there are still issues, the troubleshooting process should be repeated until the F3 error is resolved.
Tips
The F3 error in Fagor dishwashers can be caused by several issues, including a clogged or damaged drain pump, a blocked drain hose, or a problem with the water level control system. If the initial troubleshooting steps do not resolve the issue, the drain plate and motor should be checked for any problems. If it is determined that the drain pump is the issue, it should be replaced. It is important to perform a dishwasher test once the repairs have been made to ensure that the problem has been resolved.
Once the necessary repairs have been made, it is important to test the dishwasher to ensure that the F3 error has been resolved. The specialized technician should run the dishwasher and verify that the water drains correctly and that there are no leaks.
Other error codes in Fagor Dishwasher
Error H01 in Fagor Dishwasher
Error F09 in Fagor Washing machine
