Connect with us
Solve dryer faults faster with practical guides to error codes, common breakdowns and simple repair steps. Get clear help to identify what the warning means and act quickly. Use these articles to bring your drying machine back to life with less stress.
The warning points to accumulated dirt in the drum and to pending maintenance cleaning.
The dryer is protected by an unevenly distributed load. Here’s how to fix the warning and when it’s best to ask for technical help.
The D01 warning usually indicates a water supply fault, and it is advisable to check the pressure, filter, hose, and drain.
The D02 warning usually indicates a drainage problem in the Fagor dryer, and these are the most useful checks.
The fault indicates a heating failure: the heating element, thermostats, wiring, or circuit board may be behind it.
The fault points to the motor or the control board. These are the useful checks and when it’s advisable to stop the dryer.
The D05 warning usually indicates a fault in the NTC probe or its wiring. This is how it is interpreted and checked.
The stop due to a blocked drum usually halts the cycle and points to a very specific mechanical or electrical fault.
The D07 warning usually indicates the door or the door lock, although it can also point to the motor and its wiring.
The fault usually points to the selector or the electronics, with signs that should be checked before using it again.
The alert indicates a leak or excess of water with the safety system activated. This is how it is located and corrected.
The alert indicates the drum position sensor. Check the connections, wiring, and condition of the assembly before repairing.