How to eliminate 6 BEEPS Error Code on Fagor Dishwasher
- Error: 6 BEEPS
- Description: The dishwasher emits 6 continuous beeps during the washing cycle.
- Cause: The cause of this error can be a faulty dishwasher door, a problem with the drain pump motor, a defective temperature sensor, among others.
- Solution:
- Verify that the dishwasher door is properly closed and adjusted. If necessary, replace the door gasket.
- Check that the drain pump motor is functioning properly and not clogged with food debris.
- Verify the temperature sensor and ensure it is working correctly. If necessary, replace the sensor.
- Inspect the dishwasher’s electronic board for possible faults and replace any defective parts if necessary.
If you have a Fagor dishwasher and encounter the F6 error code or 6 beeps, it means there is a problem with the appliance’s water heating system. This can be a significant inconvenience, as hot water is crucial for effective dishwashing. In this article, we will guide you through the steps to solve this error in your Fagor dishwasher.
Identifying the Error:
Before beginning to solve the error, it is important to understand what it is. The F6 error code or 6 beeps refer to a failure in the Fagor dishwasher’s heating element. However, several parts and components may be contributing to the problem, so we will need to perform a more detailed inspection.
Steps to Follow:
The following are the steps to follow to solve the 6 beeps error in a Fagor dishwasher:
- Unplug the dishwasher: Before beginning, it is crucial to unplug the dishwasher for at least a minute to allow the appliance to reset.
- Remove the side panels: Once the dishwasher is unplugged, remove the side panels to access the area responsible for heating the water.
- Look for the heating element: In most cases, failures related to the F6 error are related to the heating element’s corresponding resistor. Look for and locate the heating element.
- Check the sensor or switch on the heating element: The heating element consists of a sensor that can be checked to ensure it is functioning correctly.
- Verify the NTC probe: If the problem is not in the heating element, it may be a fault in the heating system or some of its components. It is important to verify the NTC probe.
- Check if voltage is reaching the heating element: Ensure that voltage is reaching the heating element. If there is no voltage, there may be a problem with the electronic board.
- Check the electronic board: In the worst-case scenario, the error may be caused by a problem in the dishwasher’s electronic board. If you reach this point and the problem has not been solved, it is necessary to check the electronic board for possible faults.
It is essential to keep in mind that inspecting the interior of an appliance is not an easy task and should be performed by trained and experienced professionals. Errors like the one presented in this article are highly complex and should be handled by experts.
By following these steps, you will be able to solve the F6 error code in your Fagor dishwasher and ensure that the water heats correctly for effective dishwashing.
Other error codes in Fagor Dishwasher
Troubleshoot error code “H01” in Fagor Dishwasher
Troubleshoot error code “F09” in Fagor Washing machine
