How to eliminate error The remains of lime remain in the dishes and glassware, which gives them a foggy appearance in Beko dishwasher?
- Error: The remains of lime remain in the dishes and glassware, which gives them a foggy appearance
- Description: • The polishing is not enough – • There is salt filter. – • Water hardness adjustment is low or salt level is insufficient
- Cause:
- Solution: Measure the hardness of the water properly and check the adjustment of the hardness of the water. – Try not to pour salt around the salt filling hole. Make sure the water tank cover after finishing the process. Use the pre -flavored program to remove salt spot inside the machine. Since the salt granules that will remain under the roof will dissolve during the pre -flag, causing the cover to release, check the cover once again at the end of the program. – Check the polishing indicator and greenery. If necessary. Increase the brightener adjustment if there is not enough overlook on the machine.
More tips
If you fail to solve the Beko dishwasher error, we recommend that you contact a specialist so you can examine your dishwasher. They can help you diagnose the problem and provide solutions to solve it. They can also give instructions on how to improve the performance of their dishwasher and extend their useful life.
Other error codes in Beko dishwasher
Beko Dishwasher Error Codes
When your Beko dishwasher starts acting up, it can be frustrating not knowing what's going on. Fortunately, most modern dishwashers, including those from Beko, are designed to display specific error ...
How to Fix Error H4 in a Beko Dishwasher
Error H4: Problem with the water heater Description: Error H4 in a Beko dishwasher indicates a problem with the water heater. It can be caused by a failure in the ...
Solution of error E02 in Beko dishwashers
If your Beko dishwasher presents the E02 error, the first thing to do is to check the water inlet and filter. Steps to follow to solve the E02 error: Check ...