Troubleshoot error code “E2” in Bosch dishwasher

Before we dive in, let’s understand a bit better what this code means:

  • Error: E2
  • Description: This error code indicates an issue with the temperature sensor, also known as the thermistor.
  • Cause: It may be caused by a sensor failure or a poor electrical connection.
  • Solution: We’ll try to reset the dishwasher, and if that doesn’t work, we’ll check the sensor with a multimeter.

If your Bosch dishwasher is causing headaches with the annoying E2 error code, don’t worry! Here at codigodeerror.com, we’ll guide you step by step to solve the problem and have your dishes shining again in no time.

What is a Thermistor and Why is it Important?

The thermistor is a type of resistor that changes its value depending on the temperature. In your dishwasher, it monitors that the water reaches the right temperature for effective cleaning. If this little guy isn’t working well, your dishwasher might not heat the water as it should, hence showing the E2 error.

Steps to Solve the E2 Error in Your Bosch Dishwasher

Step 1: Reset the Dishwasher

Sometimes, the solution is as simple as giving your appliance a break. Follow these steps:

  1. Turn off the dishwasher from the control panel.
  2. Disconnect it from the power supply.
  3. Wait for about five seconds (take a breather).
  4. Reconnect it and turn it back on.

Step 2: Check the Thermistor

If the reset hasn’t worked, it’s time to put on your detective hat and check the thermistor:

  1. Disconnect the dishwasher again to avoid electrical surprises.
  2. Locate the thermistor. It’s usually near the heating element. If you’re not sure where it is, consult your model’s manual.
  3. Check the thermistor with a multimeter. You should get a resistance reading that changes with temperature. If you don’t know how to use a multimeter, we have guides here at codigodeerror.com, or you can ask a friend who knows.

Step 3: Replace the Thermistor (if necessary)

If the thermistor is damaged, there’s no turning back; you’ll need to replace it:

  1. Purchase a new thermistor compatible with your Bosch dishwasher model.
  2. Install it in the place of the old one. If you’re not comfortable doing this, don’t hesitate to call a technician.

Step 4: Test Your Dishwasher

Once you’ve reset or replaced the thermistor, it’s time to test if the E2 error code has disappeared:

  1. Turn on the dishwasher and select a short cycle.
  2. Observe if the cycle completes without errors.

Final Tips

  • Safety first: Always disconnect the dishwasher before working on it.
  • Consult the manual: Each Bosch dishwasher model may have its peculiarities, so having the manual handy is a good idea.
  • Ask for help: If you don’t feel confident about these steps, it’s better to call a professional.

We hope these tips have helped you resolve the E2 error code problem in your Bosch dishwasher. If you need more help or have other codes to decipher, we’re here to assist you at codigodeerror.com!

Other error codes in Bosch dishwasher

How to Fix Error E4 in Bosch Dishwashers

How to Fix Error E4 in Bosch Dishwashers

Error E4: Water Drainage Error: E4 Description: Indicates a problem with water drainage in the Bosch dishwasher. Cause: It can be caused by blockages in the drain pipes, a clogged ...
How to Fix the F Error in Bosch Dishwashers

How to Fix the F Error in Bosch Dishwashers

Bosch dishwashers are high-quality and high-performance appliances, but like any other device, they can experience technical problems. One of the most common error codes that can appear in a Bosch ...
How to Fix Error E04 in a Bosch Dishwasher

How to Fix Error E04 in a Bosch Dishwasher

Error E04: Description, Cause, Solution Error E04: Heating circuit problem. Description: The Bosch dishwasher displays error E04 when there is a problem in the heating circuit. Cause: Possible causes include ...