- Error: E01
- Description: Dishwasher cannot fill with water.
- Cause: Problems with the turbidity sensor, bypass valve, temperature sensor, water meter and drain pump.
- Solution: Perform a function test to detect faults in the electronic system and request professional technical assistance to prevent further damage.
If you have a Beko dishwasher you may encounter Error E01. This error indicates that the dishwasher is unable to fill with water, which can be caused by various problems in the electronic system. In this article, we will provide you with a detailed guide to troubleshoot this error and prevent further damage to your dishwasher.
How to perform a function test
Before you start troubleshooting Error E01, it is important to perform a function test to detect faults in the electronics. Follow these steps to perform the test:
- Disconnect the dishwasher from the electrical power.
- Open the dishwasher door and press the start/stop button for five seconds.
- Close the dishwasher door.
- Connect the dishwasher to the power supply.
- Wait for the dishwasher to perform the function test.
During the function test, the dishwasher will perform a series of cycles to detect faults in the electronics. If a fault is detected, the dishwasher will display an error code on the LCD display. If no fault is detected, the dishwasher will return to standby mode.
Troubleshooting Error E01 in Beko dishwashers
If the dishwasher displays Error E01 during the function test, there may be a problem with the turbidity sensor, bypass valve, temperature sensor, water meter or drain pump. Follow these steps to troubleshoot the error:
- Verify that the water faucet is open and the water supply is working properly.
- Verify that the water filter is clean and that there are no blockages in the water pipes.
- Verify that the bypass valve is working properly and that there are no obstructions in the water lines.
- Verify that the turbidity sensor is clean and that there are no obstructions in the water lines.
- Verify that the temperature sensor is working properly and that there are no obstructions in the water lines.
- Verify that the water meter is working properly and that there are no obstructions in the water pipes.
- Check that the drain pump is working properly and that there are no blockages in the drain pipes.
If after checking all these items the problem persists, it is advisable to request professional technical assistance to avoid further damage to the dishwasher.
Our advice
Error E01 in the Beko dishwasher can be caused by several problems in the electronic system, such as problems with the turbidity sensor, the bypass valve, the temperature sensor, the water meter and the drain pump. If the dishwasher displays this error, it is important to perform a function test to detect faults in the electronic system and check all the items mentioned above. If the problem persists, it is advisable to request professional technical assistance to avoid further damage to the dishwasher.
Other Beko dishwasher error codes
Beko Dishwasher Error Codes
How to Fix Error H4 in a Beko Dishwasher