- Error: “E10 E11”
- Description: The dryer does not register that the clothes are dry within 90 minutes (factory setting).
- Cause: Possible issues with sensor connections, overloading of clothes, blown fuse, or problems with the RMC belt
- Solution: Check connections, ensure there is no overloading of clothes, inspect fuses and related components.
What Does Error Code E10 E11 Mean?
This error code appears when the RMC system of your Electrolux dryer does not detect that the clothes have dried within the expected time, which is 90 minutes by default. The dryer is designed to automatically stop when the clothes reach the selected residual moisture level, but if something goes wrong, it will let you know through this code.
Steps to Solve Error E10 E11
- Check Connections
- First, make sure that connections P10-1 and P10-2 are properly connected. This should be done with the drum empty. If you are unsure how to do this, refer to the service manual or contact a technician.
- Check Air Temperature
- If the air inside the dryer is cold, it could indicate that the thermal fuse has blown or there is an issue with the heating element.
- Do Not Overload the Dryer
- An excessive load of clothes can prevent the dryer from functioning properly. If you suspect this could be the problem, remove some garments and restart the cycle.
- Reset the Dryer
- If your Electrolux dryer displays error E10 or E11, try resetting it by opening and closing the door and pressing the start button.
- Check Maximum Drying Time
- The maximum drying time is set in the dryer and if necessary, you can adjust it. Refer to the service manual to learn how to change parameter 6.04.
- Inspect Specific Components
- RMC Belt: Verify that it is in place and in good condition.
- Lift Insulation: Ensure there is no damage that could affect moisture detection.
- Fuses: If you suspect the fuse is blown, check and replace if necessary.
If after following these steps the problem persists, it may be necessary to contact a specialized technician to perform a more detailed inspection and repair any faulty components.
Remember that it is important to regularly maintain your dryer to avoid these errors. Clean the filters, ensure the ventilation ducts are clear, and follow the manufacturer’s recommended loading instructions.
If you need further assistance or information about other error codes, visit our website errorcode.com, where you will find detailed guides to keep your appliances running smoothly. Don’t let an error code prevent you from enjoying the comfort of your home!
Other error codes in Electrolux drying machine
Errors or Error Codes for Electrolux Dryer
Troubleshoot error code “EB3” in Electrolux drying machine
