- Error: “F06”
- Description: The F06 error code in Whirlpool dryers points to an issue related to the clothing load, which can block the door.
- Cause:This error occurs when the clothing loaded into the drum exceeds the appliance’s capacity or when clothes get stuck in the door seal.
- Solution: To fix this error, you can turn off the machine, disconnect it from the power supply, and open the door after three minutes.
Encountering the F06 error code on your Whirlpool dryer can be frustrating, but don’t worry, we’ll guide you through the steps to fix it. This error may indicate that something isn’t working right with your appliance, but with a little patience and by following our instructions, you can resolve it without too much trouble.
Steps to Resolve the F06 Error
- Turn Off the Dryer: The first thing you should do is turn off your Whirlpool dryer to avoid any electrical hazards.
- Disconnect the Dryer: Once turned off, unplug the dryer from the electrical outlet. This is an important safety measure before handling any appliance.
- Wait Three Minutes: It’s advisable to wait at least three minutes before proceeding. This time allows any residual electrical charge to dissipate.
- Open the Door and Check the Load: After waiting, open the dryer door and check the clothing load. Make sure it’s not exceeding the weight limit recommended by the manufacturer and that clothes are not obstructing the door seal.
- Redistribute the Clothing: If you find that the load is excessive or unevenly distributed, remove some garments or redistribute them evenly within the drum.
- Clean the Door Seal: Take the opportunity to clean the door seal, as lint buildup or small objects can sometimes cause obstructions.
- Reconnect and Turn On the Dryer: After making the necessary adjustments, reconnect the dryer to the power supply and turn it on.
- Run a Test: Select a short cycle and watch to see if the dryer operates correctly without displaying the F06 error code.
- If the Error Persists: If the F06 error continues to appear, it might indicate a more serious issue that requires the attention of a specialized technician.
Remember, if you don’t feel confident performing these steps or if the problem persists after trying the solution, it’s advisable to contact a specialized technician. At codigodeerror.com, we’re here to assist you with any questions or issues you may have with your appliances.
Other error codes in Whirlpool drying machine

Troubleshoot error code “PF” in Whirlpool drying machine
How to eliminate PF error in Whirlpool dryer? Error: PFDescription: Food failureCause: Solution: There was an energy cut while the dryer was working. Press Start to continue the cycle or ...

Troubleshoot error code “F98” in Whirlpool drying machine
How to eliminate F98 error in Whirlpool dryer? Error: F98Description: Drying level not supportedCause: Solution: The main control card requires reprogrammed More tips If you fail to solve the error ...

Troubleshoot error code “F78” in Whirlpool drying machine
How to eliminate F78 error in Whirlpool dryer? Error: F78Description: User interface control set errorCause: Solution: Unplug the dryer. Check cable mallet connections between user interface assemblies. Also check the ...