When it comes to cooking, Electrolux induction cooktops are a marvel of modern technology, offering precision, efficiency, and safety. However, as with any advanced appliance, technical issues can arise, manifesting through error codes. These codes are designed to help you identify and, in many cases, resolve issues without the immediate need to call for technical service.
But what does each error code mean? Below, we present a detailed table with the most common error codes for Electrolux cooktops, their description, and recommended solutions. Before diving into details, it’s important to understand some concepts:
- Interface: Refers to your cooktop’s control panel, where you adjust temperatures, turn cooking zones on or off, among other functions.
- Temperature sensor coil: A part of the cooktop that detects the temperature of the cooking zone.
- Induction module: The component that generates the magnetic field which heats the cookware on an induction cooktop.
- Supply voltage: Refers to the voltage that your cooktop receives from your home’s electrical installation.
With these concepts clear, let’s look at the error codes:
| Error | Description | Solution |
|---|---|---|
| E0 | Interface configuration error. | Interface check test. |
| E1 | Compatibility | Check Interface Change. |
| E2 | LED lighting error or temperature sensor error. | Disconnect the appliance’s power supply for at least 30 seconds. |
| E311 | The cooktop is connected to an incorrect power supply of 400V. | Contact the cooktop installer or technical service. |
| E312 | The cooktop is connected to an incorrect power supply of 400V. | Contact the cooktop installer or technical service. |
| E313 | The cooktop is connected to an incorrect power supply of 400V. | Contact the cooktop installer or technical service. |
| E4 | Temperature sensor coil defect. | Change the coil. |
| E401 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E402 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E403 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E421 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E422 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E423 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E431 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E432 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E433 | Overheating protection triggered. | Unplug the cooktop from the power supply for more than half a minute and then reconnect and turn it on. |
| E5 | Supply voltage out of range. | Check the network voltage. |
| E6 | Induction module defect. | Check circuit and capacitors+module change. |
| E641 | Connection error. The cooktop is only connected to one phase. | Check the connection. Unplug the unit for a minute and turn it back on. |
| E7 | Overheating of the induction modules. | Disconnect the appliance from the electrical network and call technical service. |
| E8 | Disconnection with the power card. | Disconnect the appliance from the electrical network and call technical service. |
| E822 | The cooktop is connected to a single phase. | Check the connection or call your installer or technical service. |
| E9 | Incorrect configuration for the Touch Control | Disconnect the appliance from the electrical network. Wait 10 sec. and reconnect. |
| F | Cookware not suitable for induction. | Make sure the cooking zone is dry and use compatible cookware. |
| F1 | Cookware not suitable for induction. | Make sure the cooking zone is dry and use compatible cookware. |
| F2 | Cookware not suitable for induction. | Make sure the cooking zone is dry and use compatible cookware. |
| F3 | Cookware not suitable for induction. | Make sure the cooking zone is dry and use compatible cookware. |
| H | Residual heat in the cooking zone. | Wait for the cooking zone or cookware to cool down. |
| _ | Automatic shutdown active. | Remove the object or clean the control panel. Wait for the focus to cool down before using the cooktop again. |
Our Advice
Before calling technical service, we recommend checking this table and following the suggested solutions. Many problems can be easily resolved without the need for professional assistance.
Error codes in Electrolux kitchen plate
Troubleshoot error code “_” in Electrolux kitchen plate
How to delete the error _ in electrolux kitchen plate? Error: _Description: Automatic off activated. This may have been spilled liquid or there is an object on the control panel ...
Troubleshoot error code “H” in Electrolux kitchen plate
How to delete the H Electrolux cooking error? Error: HDescription: While this symbol appears it will be residual heat in cooking focus.Cause: Solution: Wait for the cooking zone or the ...
Troubleshoot error code “F3” in Electrolux kitchen plate
How to delete the F3 error in electrolux kitchen plate? Error: F3Description: He points out that the container is not suitable for cooking with induction, there is no container in ...