How to eliminate F5/E error in Whirlpool oven?
- Error: F5/E
- Description: Door switch defect
- Cause: This occurs when the door switches do not match.
- Solution: If the door is locked, disconnect the energy from the unit and check the cables and connections. If damage is, replace the appropriate piece. If the connections are not damaged, re -connect the feed and hold any key until the F5 error disappears. Once the F2 code appears, select ‘Cancel’ and observe the errors for a minute. If the door is not hooked, disconnect the energy from the unit and check the cables and connections. If damage is, replace the appropriate piece. If the connections are not damaged, measure the door switch (open door = open pestillo) and the pestillo switch (disengagement = open switch) and replace it if it is defective. If corrections are made during any step, the feed must be re -connected and the unit must be tested. Press and hold any key to erase the error code and the F2 code should appear. Select ‘Cancel’ and observe the errors for a minute. If the error continues, disconnect the energy and replace the control.
More tips
If you are not able to solve an error in your Whirlpool oven, we recommend that you contact a technical or specialist service in appliances. They will be able to give a diagnosis and, if necessary, make the necessary repairs for their oven to function properly.
Other error codes in Whirlpool oven
Whirlpool Oven Error Codes
When your Whirlpool oven starts acting up, displaying numbers and letters on the control panel, it can be a bit intimidating. But worry not, those are error codes, and they're ...
Troubleshoot error code “F7/E1” in Whirlpool oven
How to eliminate error F7/E1 in Whirlpool oven? Error: F7/E1Description: The common switch cable is defectiveCause: This error occurs when the lock switch and the door switch are short -circuit.Solution: ...
Troubleshoot error code “F6/E0” in Whirlpool oven
How to eliminate F6/E0 error in Whirlpool oven? Error: F6/E0Description: Non -connected lineCause: Solution: Replace the control board (clock) More tips If you have problems solving an error in your ...