When it comes to Balay ovens, like any other appliance, technical issues can arise that often manifest through error codes on the control panel. These codes are designed to help you quickly identify the source of the problem, but understanding what each one means can be a challenge if you’re not familiar with them.
In this article, we present a complete table of common error codes for Balay ovens, along with their descriptions, possible causes, and recommended solutions. Before we dive into the table, let’s clarify some concepts that might be new or confusing to you.
Demo Mode: This is a setting used in stores to demonstrate the oven’s functionalities without activating its heating elements. If your oven is in this mode, it won’t work for cooking.
Thermal and Automatic Safety Disconnect: These are safety mechanisms that turn off the oven to prevent damage or fire risks if they detect abnormally high temperatures or incorrect operation.
Control Panel: This is the interface where you adjust the temperature, time, and specific functions of your oven. It can be touch-sensitive or have physical buttons.
Safety Thermistor Sensor: This is a type of resistor that changes its value depending on the temperature, used to measure and control the temperature inside the oven.
Child Lock: A feature designed to prevent children from activating the oven or changing its settings without supervision.
With these concepts in mind, here is the table of error codes for Balay ovens:
| Error | Description | Cause | Solution |
|---|---|---|---|
| . . | Demo mode activated | Deactivate the Demo mode in the basic settings. | |
| E05232 | Dirt on the control panel can cause a touch field to be permanently active. | Turn off the appliance and carefully clean the control panel. Reconnect the appliance. | |
| E1/E4 | The thermal safety disconnect has been activated. | Allow to cool or include in the technical sheet checking the safety thermistor sensor. | |
| E11 | Moisture in the control panel. | Let the control panel dry, be careful with drying at a temperature that is not controlled | |
| E17 | Failure in rapid heating. | Request assistance | |
| E2 | The automatic safety disconnect has been activated. | Press any key or move the rotary selector and reset. | |
| E3 | The oven function is faulty. | Perform the checks from the technical sheet + switch and resistance | |
| E5005 | The steam function has been activated repeatedly with the water tank empty. | Before using it again, make sure the water tank is filled with cold water and fully inserted into its chamber. | |
| SAFE | Child lock | Controls cannot be adjusted or manipulated | To deactivate the child lock, press the sensor with the key symbol O-¬ for approx. 4 seconds |
| d | Demo mode activated | Briefly disconnect the appliance from the network (disconnect the automatic switch from the electrical panel) and then deactivate the Demo mode within approx. 5 minutes by setting the value ‹ in the basic settings c13 |
Our Advice
Before calling technical service, we recommend checking this table and following the suggested solutions. Many problems can be easily resolved without the need for professional assistance, saving you time and money. However, if the problem persists or you do not feel confident performing any of the proposed solutions, do not hesitate to contact a qualified technician.
Error codes in Balay oven
Troubleshoot error code “d” in Balay oven
Troubleshoot error code “SAFE” in Balay oven
