When it comes to Teka ovens, like any other appliance, issues or malfunctions can arise that are often presented through error codes. These codes are designed to help you quickly identify the nature of the problem, making it easier to solve. However, for many of us, these codes might seem like a completely different language. That’s why, at codigodeerror.com, we’ve prepared a simple guide to help you decipher these codes and offer practical solutions.
Before diving into the error code table, it’s important to understand what they are and how they can help you. An error code on your Teka oven is essentially a way for the appliance to communicate a specific problem or internal malfunction. Think of it as a message from your oven saying, “Hey, something’s not right here.” These codes are a crucial diagnostic tool, not just for technicians but also for users like you, allowing you to perform some basic fixes on your own before calling in technical service.
Below, you’ll find a complete table with the most common error codes for Teka ovens, along with a description of each issue, its probable cause, and recommended solutions. Remember, some solutions may require the intervention of a qualified technician, especially if they involve electrical or electronic components.
Error | Description | Cause | Solution |
---|---|---|---|
1. The oven does not work | Check the position of the function and temperature selectors. | Verify the connection to the electrical circuit; confirm the fuses and the current limiter of your installation; make sure the clock is in manual or programmed mode; | |
2. The interior light of the oven does not work | Change the bulb; Confirm its correct assembly according to the instruction manual. | ||
3. The heating indicator light does not work | Select a temperature; select a setting; it should only turn on while the oven is heating to its established working temperature. | ||
4. The smoke emitted while the oven is operating | Clean the oven periodically; reduce the amount of grease or oil added to the tray; Do not use higher temperature settings than those of the cooking tables. | ||
5. The expected cooking results are not achieved | Check the cooking tables for guidance on operating your oven. | ||
6. The oven cannot be turned off | Electronic components may be wrong. | Disconnect the fuse, call customer service. | |
7. The oven does not heat | “Faulty fuse. The oven temperature control or function switch has not been turned on. the electronic timer is flashing.” | Check and replace the fuse, if necessary. Set the oven temperature control or function switch as needed. The clock has not yet been set. Set the clock. | |
8. Oven door glass broken | Turn off the appliance, call customer service. | ||
It is lit but does not heat | check if the door is properly closed (if the door is not properly closed, microwaves will not be produced). | ||
Does not work | Check if the power outlet to which the oven is plugged has power. To do this, plug another device into the same power outlet and check if it works. | ||
Has some external damage | The oven should not be used if the door or door seals are damaged, the hinge broken, seals deteriorated, the oven casing is distorted or bent. |
Our advice
Before calling technical service, we recommend checking this table and following the suggested solutions. Many times, problems can be resolved with simple steps that do not require professional assistance. However, if after trying these solutions the problem persists, do not hesitate to contact Teka’s technical service for more specialized assistance.
Error codes in Teka oven

Troubleshoot error code “Broken oven door glass” in Teka oven

Troubleshoot error code “It has some external damage” in Teka oven
