- Error: E30
- Description: Problem with water or the pump.
- Cause: The water tank may be full or there could be an issue with the pump.
- Solution: Check and empty the water tank and inspect the pump.
If your Teka washing machine is giving you a headache with the E30 error, don’t worry! I’ll explain step by step how you can fix it without having to call a technician. Before you begin, remember to disconnect the washing machine from the power supply to avoid any accidents.
What Does the E30 Error Mean?
The E30 error in Teka washing machines usually indicates a problem related to water or the machine’s pump. This can be because the water tank is full or the pump is not functioning correctly.
Steps to Resolve the E30 Error
1. Empty the Water Tank
- Locate the water tank: It’s usually at the bottom of the washing machine.
- Remove the tank: Hold it with both hands and pull it towards you carefully.
- Empty the water: Tilt the tank to pour out the accumulated water.
- Reinstall the tank: Once empty, place it back in its original position.
2. Inspect the Pump
- Access the pump: You may need a screwdriver to open the panel where the pump is located.
- Check for obstructions: Sometimes, small objects or lint accumulation can block the pump.
- Clean the pump: If you find anything blocking it, carefully remove it.
- Verify its operation: Once cleaned, ensure that the pump rotates freely by hand.
3. Check the Filter and Airflow
- Clean the lint filter: Remove it, clean it with water, and put it back.
- Ensure airflow is not blocked: Check that nothing is obstructing the washing machine’s air outlet.
4. Inspect the Electrical System
- Check the power cable: Ensure it’s not damaged, and the connection to the power supply is correct.
- Inspect the control panel: If the problem persists, there may be a fault in the control panel or the electronic board.
Additional Tips
- Avoid overloading the washer: Make sure not to exceed the maximum load capacity, as this can affect the pump’s operation.
- Regular maintenance: Clean the lint filter and air condenser regularly to prevent future errors.
If after following these steps the E30 error persists, it may be necessary to contact a specialized technician to check your Teka washing machine. However, often, with a bit of cleaning and maintenance, your washer will be back to working like new!
Other error codes in Teka washing machine
Troubleshoot error code “E06” in Teka washing machine
What to do when the error appears: Motor failure ...
Troubleshoot error code “E01” in Teka washing machine
What to do when the error appears: Puerta error has been detected poorly closed. The error code is shown when it detects that the door has closed after twenty seconds ...