How to eliminate error E05 in Siemens washing machine?
- Error: E05
- Description: Water supply problem.
- Cause: Tap with bad water flow.
Entrance hose in poor condition.
Electrovalve without current or damaged.
Fugging in the tube that connects the prisoner.
- Solution: Check the pressure.
Check the hose.
Check the water inlet filters.
It is a problem that occurs when the water does not enter the washing machine through the hose. The most common causes of error are: water pressure is too low, water intake filters are clogged or hose is clogged.
To solve the error, you must first check that the water pressure is between 2 and 4 bars. If the pressure is less than 2 bars, the water flow will be insufficient. If the pressure is greater than 4 bars, the water flow will be excessive and a leak could occur.
If the water intake filters are clogged, the water flow will be insufficient. Therefore, it is necessary to clean the water intake filters to the supply.
If the hose is obstructed, the water flow will be insufficient. Therefore, it is necessary to verify that the hose is free of obstructions.