How to eliminate E35 error in Bosch washing machine?
- Error: E35
- Description: Water has leaked in the base of the appliance
- Cause: Blockage in drain filter and/or pressure switch inside the top of the appliance
- Solution: Clear the blockage in the drain filter and/or check the pressure switch inside the top of the appliance.
A Step-by-Step Guide to Cleaning the Drain Pump Filter
If you’re experiencing noise coming from your washing machine, it could be caused by something stuck in the drain pump filter. This is a relatively simple problem to fix, and can be done in a few easy steps.
First, unplug your appliance and remove the bottom front flap. This will give you access to the drain pump filter. Before you begin, it’s a good idea to place some beach towels and a shallow container under the filter to catch any water that may spill out during the cleaning process.
Next, rotate the drain pump filter anti-clockwise to open it. Clean the filter completely and make sure it is not clogged. Check the impellor to make sure it rotates easily. Once you’ve finished cleaning the filter, reconnect everything and plug the appliance back in.
If you’re unable to open the filter, or if it won’t open, you can try running the washing machine on a drain only program. Once the program has finished, open the door and try to access the filter again. This will help to clear any blockages that may be preventing the filter from opening.
In conclusion, a noisy washing machine can be caused by a clogged drain pump filter. By following these simple steps, you can easily fix the problem and get your appliance running smoothly again. Remember to always unplug the washing machine before cleaning the filter and always be careful when handling the filter or any other internal parts of the washing machine.
- Unplug the appliance and remove the bottom front flap.
- Place beach towels and a shallow container under the filter.
- Rotate the drain pump filter anti-clockwise to open it.
- Clean the filter completely and make sure it is not clogged.
- Check the impellor to make sure it rotates easily.
- Reconnect everything and plug the appliance back in.
- If unable to open the filter, try running the washing machine on a drain only program and open the door after the program finish.
- Remember to always unplug the washing machine before cleaning the filter and handle internal parts carefully.
It’s important to note that the drain filter should be cleaned once a month to avoid these types of issues. This simple maintenance task can help prevent blockages from forming and keep your washing machine running smoothly.
If you encounter a KEY symbol on the display, press and hold it for around 10 seconds to unlock the control. However, if it looks like a door lock, that indicates that the door is locked and something is stuck in the drain. If this is the case, the door will not open.
In this scenario, you may unplug the washing machine and open the door with the emergency release next to the drain pump filter. However, it’s important to note that this may cause water to leak from the door if the drum is full of water. So, it’s recommended to perform this step when the drum is empty or almost empty.
Other error codes in Bosch washing machine
5 washing machine brands that will last for years and make your life easier
Troubleshoot error code “E18” in Bosch washing machine
