- Error: “E8”
- Description: The E8 code indicates a failure in the motor or other devices in the washing machine.
- Cause: It could be caused by faulty bearings, damaged electrical connections, issues with the motor, or the electronic board.
- Solution: Check and repair the affected components, preferably with the assistance of a specialized technician.
If you’re encountering the E8 error code on your Daewoo washing machine, you might be dealing with issues related to the motor or other components of the appliance. Don’t worry; we’ll guide you through the steps to identify and resolve this problem.
Identifying the Problem
The E8 error can manifest in various ways, commonly appearing after the washing machine has been running for several minutes. In some cases, the machine may not even start spinning before displaying the error. Given the complexity of this issue, seeking the help of a specialized technician is recommended.
Potential Causes and Solutions
Check: Ensure that the drum bearings are in good condition and that the drum rotates freely.
Solution: If the bearings are damaged, they will need to be replaced.
Check: Examine all electrical connections of the washing machine, looking for loose or damaged wires.
Solution: Any faulty wires should be replaced with new ones.
Motor and Hall Sensor
Check: Verify the connectors of the motor and the Hall sensor, ensuring the motor receives the proper current.
Solution: If there are issues with the Hall sensor or the motor, they may need to be replaced.
Check: Examine the coils or windings of the motor. This requires technical knowledge or the assistance of a professional.
Solution: If the coils are damaged, the motor will need to be repaired or replaced.
Check: Inspect the electronic board for any signs of damage.
Solution: A defective electronic board may need to be repaired or replaced.
Due to the complexity of these faults, it’s strongly recommended to entrust the repair to a professional. Contact an official Daewoo service technician in your area.
- Required Tools: For some tests, you’ll need a basic multimeter or tester.
- Visual Inspection: Often, a visual inspection can reveal obvious issues such as water traces or damaged electronic components.
- Cycle Phases: Pay attention to the phase of the washing cycle when the error occurs; this could indicate which components are failing.
Remember that knowledge is power. If you have doubts about the components or washing cycle phases, don’t hesitate to seek more information or ask an expert.
For more details and guides on troubleshooting appliances, visit codigodeerror.com.
Note: This article is a general guide and doesn’t replace professional diagnosis and repair. If you’re not comfortable performing these tasks, contact a specialized service technician.