Troubleshoot error code “IE” in Daewoo washing machine

How to eliminate the EI error in Daewoo washing machine?

  • Error: IE
  • Description: Water entrance error
  • Cause: Blocked drain pump or faulty water level sensor diaphragm.
  • Solution: Disconnect the feed for at least 30 seconds and then connect again. Check connections. COVER The unit Check the pressure switch check PCB

The IE error code on a Daewoo washing machine indicates a problem with the water inlet of the appliance. This can be caused by a blocked drain pump or a faulty diaphragm in the water level sensor.

Here are some possible solutions to fix the IE error on your Daewoo washing machine:

  1. Disconnect the power to the washing machine for at least 30 seconds and then reconnect it. This may reset the system and resolve the issue.
  2. Check for any water supply interruptions in your home. Make sure the faucet is fully open to allow the correct amount of water into your washing machine.
  3. Inspect the wiring of the water inlet valve. Ensure it is properly connected and there are no loose or damaged wires.
  4. Check the condition of the water check valve. If it is clogged or damaged, it can cause problems with the water inlet.
  5. Verify that the drain pump is not obstructed. If there is any object or dirt blocking the pump, it can affect the water flow.
  6. Check the condition of the pump impeller blades and ensure they are not damaged or simply obstructed. If the blades are damaged, it may be necessary to replace the pump.
  7. Inspect the pressure switch. Make sure it is functioning correctly and not obstructed.
  8. Check the PCB (printed circuit board). If there is any issue with the board, it can affect the operation of the washing machine and cause the IE error.

If the IE error persists after following these steps, it is recommended to disconnect the washing machine and contact Daewoo’s specialized technical service. They will be able to provide you with additional assistance and properly resolve the problem.

Remember that it is important to regularly maintain your Daewoo washing machine to prevent potential issues and prolong its lifespan. Clean the filters regularly and check the connections to ensure everything is in good working condition.

Other error codes in Daewoo washing machine

Troubleshoot error code "E4" in Daewoo washing machine

Troubleshoot error code “E4” in Daewoo washing machine

What to do when the error appears: Leakage error ...
Troubleshoot error code "SE" in Daewoo washing machine

Troubleshoot error code “SE” in Daewoo washing machine

What to do when the error appears: Door lock. The safety switch is open just before entering the rotation stage ...