Troubleshoot error code “E42” in Electrolux washing machine

  • Error: E42
  • Description: Issue with the door lock.
  • Cause: The washer has detected a failure in the door lock mechanism.
  • Solution: Verify and, if necessary, replace the door lock mechanism.

If you’ve encountered the E42 error code on your Electrolux washer, there’s no need to worry. Although it might seem like a complicated technical problem, it often has a simple solution that you can handle yourself. Here, we’ll explain what this error means and how you can resolve it.

What Does the E42 Error Code Mean?

The E42 error code on Electrolux washers indicates a problem with the door lock mechanism. This error may occur if the door doesn’t close properly or if there’s a malfunction in the locking system.

Steps to Resolve the E42 Error

Check the Washer Door

Before panicking, make sure that the washer door is properly closed. Sometimes, the E42 error can occur simply because the door isn’t securely closed. Give it a firm push to ensure it snaps into place.

Inspect the Door Lock

If the door is properly closed but the error persists, it’s time to inspect the door lock. Check for anything obstructing the mechanism or visible signs of damage.

Test the Door Switch

The door switch is a component that detects whether the door is closed. If it’s damaged, it could be the cause of the E42 error. To test it, you’ll need a multimeter to check for continuity. If you’re not familiar with using a multimeter, it might be best to contact a technician.

Replace the Door Lock Mechanism

If, after the above inspections, you determine that the door lock mechanism is faulty, you’ll need to replace it. This is a task you can do yourself if you’re comfortable working with appliances, but if not, it’s best to call in a professional.

Run a Diagnostic Cycle

After any repairs, it’s a good practice to run a diagnostic cycle to ensure that the problem has been resolved and there are no other pending errors.

Additional Tips

  • Disconnect the Washer: Before attempting any repairs, make sure to disconnect the washer from the power source.
  • Consult the Manual: If you have doubts, consult the user manual of your Electrolux washer for specific instructions on how to access and replace the door lock mechanism.
  • Contact a Professional: If you’re not comfortable performing these tasks on your own, feel free to contact a professional technician.

Remember that keeping your washer in good condition not only prevents problems like the E42 error but also ensures greater efficiency and a longer lifespan for the appliance. We hope these tips help you resolve the E42 error, allowing you to use your Electrolux washer without any issues!

Other error codes in Electrolux washing machine

Electrolux Washing Machine Error Codes

Electrolux Washing Machine Error Codes

The following table presents a detailed compilation of error codes, descriptions, causes, and solutions associated with problems that may occur in a washing machine. These error codes provide useful information ...
Troubleshoot error code "Sec." in Electrolux washing machine

Troubleshoot error code “Sec.” in Electrolux washing machine

How to eliminate the ERDO ERROR IN ELECTROLUX washer? Error: Sec.Description: Communication problems between FCV and CH. Printed circuit board.Cause: Solution: Change the electronic box. More tips If you fail ...
Troubleshoot error code "Ehf" in Electrolux washing machine

Troubleshoot error code “Ehf” in Electrolux washing machine

How to eliminate EHF error in electrolux washing machine? Error: Ehf Description: Problem with the identification of the protection circuit. Cause: This error can be caused by various reasons, such as ...