Troubleshoot error code “E52” in Electrolux washing machine

  • Error: E52
  • Description: No signal from the tachometric generator of the motor.
  • Cause: The problem may be in the motor, wiring, or circuit board.
  • Solution: Verification and possible replacement of components.

If your Electrolux washing machine is showing error E52, don’t worry, because here at, we’re going to help you understand what’s happening and how to fix it. Let’s break down this problem step by step so you can get your clothes clean and fresh in no time.

What does Error E52 mean?

Error E52 is a signal that your Electrolux washing machine is not receiving the correct information from the motor. Specifically, the tachometric generator, which is like the speedometer of the motor, is not sending the right signal to the circuit board. This could be due to an issue with the motor itself, the wiring, or the circuit board.

Steps to Solve Error E52:

Check the Motor

First, let’s take a look at the motor. If the drum doesn’t spin freely by hand, it could be a sign that something is wrong with the motor. But beware, this is not a job for amateurs. If you don’t have experience with appliance repairs, it’s better to call a professional.

Inspect the Wiring

If the motor seems fine, the next step is to check the wiring. You’ll need a multimeter to measure resistance at the terminals of the circuit board connector. If you’re unsure how to do this, or if you don’t have a multimeter, it’s time to call a technician.

Replace the Circuit Board

If motor and wiring measurements are correct but the problem persists, you may need to replace the circuit board. This is something that definitely requires the expertise of a professional.

Additional Tips:

  • Maintenance: Keep filters and hoses clean to prevent future issues.
  • Proper Use: Don’t overload the washing machine, and make sure the door is properly closed before starting a cycle.

When to Call a Professional?

If, after reading this, you feel the problem is beyond you, or if you simply prefer an expert to handle it, there’s nothing wrong with seeking professional help. Error E52 can be tricky, and if not handled correctly, you might end up causing more damage to your washing machine.

Error E52 might seem intimidating, but with a bit of patience and the right help, you can fix it and get back to normal. Remember, at, we’re here to assist you with any questions you have about error codes on your appliances. Don’t let a small error keep you from enjoying the comfort of your home!

Other error codes in Electrolux washing machine

Electrolux Washing Machine Error Codes

Electrolux Washing Machine Error Codes

The following table presents a detailed compilation of error codes, descriptions, causes, and solutions associated with problems that may occur in a washing machine. These error codes provide useful information ...
Troubleshoot error code "Sec." in Electrolux washing machine

Troubleshoot error code “Sec.” in Electrolux washing machine

How to eliminate the ERDO ERROR IN ELECTROLUX washer? Error: Sec.Description: Communication problems between FCV and CH. Printed circuit board.Cause: Solution: Change the electronic box. More tips If you fail ...
Troubleshoot error code "Ehf" in Electrolux washing machine

Troubleshoot error code “Ehf” in Electrolux washing machine

How to eliminate EHF error in electrolux washing machine? Error: Ehf Description: Problem with the identification of the protection circuit. Cause: This error can be caused by various reasons, such as ...