- Error: “E59”
- Description: No Spin Signal for 3 Seconds.
- Cause: Wiring problem, Motor defective, Motor Control Board defective.
- Solution: Check and repair specific components.
When your Electrolux washing machine displays an error code, it’s a sign that something might be off. The error code E59 is one of those messages that call for your attention. Here’s what it means and how you can fix it.
What Does the E59 Code Mean?
The E59 code indicates that the washing machine is not receiving a signal from the motor that the drum is spinning. This can happen for several reasons, such as a wiring issue, a defective motor, or a Motor Control Board that’s not functioning properly.
Steps to Resolve the Issue
Check the Electrical Supply
Before starting any repairs, make sure the washing machine is unplugged from the power source to avoid accidents.
Check if the Drum Turns Freely
- Without laundry: Remove any laundry and check if the drum turns freely without resistance.
- With laundry: If the issue occurs only when there’s laundry, it could be a balancing or overloading issue.
Measure the Motor’s Resistance
- Directly on the motor: Measure the resistance between the motor terminals. You should get between 3 Ω and 6 Ω.
- On the Motor Control Board: Measure the resistance on the motor wiring connector on the board between J2-1 and J2-2, and J2-3 and J2-4.
Inspect the Wiring
- Connectors: Ensure all connectors are correctly inserted and there are no loose or damaged wires.
- Continuity: Check the continuity of the wiring between the motor and the Motor Control Board.
Replace Defective Components
- Motor Control Board: If the power supply and wiring are correct but the issue persists, consider replacing the Motor Control Board.
- Motor: If the motor’s resistance is out of the specified range, you might need to replace the motor.
Wait for the Thermal Protector to Reset
If the motor has overheated, the thermal protector might have been triggered. Wait about 30 minutes for it to reset before attempting a new diagnostic cycle.
Perform a Diagnostic Cycle
After each repair or replacement, perform a diagnostic cycle to ensure the issue has been resolved and there are no additional errors.
Additional Tips
- Cleaning: Make sure the coin filter and other components are clean to prevent blockages.
- Technical Support: If you’re not comfortable performing these tasks, consider calling a specialized technician.
Remember, safety first. If at any point you’re unsure about how to proceed, it’s better to consult with a professional. Visit codigodeerror.comfor more guides and technical assistance.
Other error codes in Electrolux washing machine
Electrolux Washing Machine Error Codes
Troubleshoot error code “Sec.” in Electrolux washing machine
