How to eliminate E62 error in electrolux washing machine?
- Error: E62
- Description: The water was heated more than 88 degrees in five minutes.
- Cause:
- Solution: Make sure the heater is in good condition (there is the possibility that there has been a failure in the case). But this code is often shown at the time of temperature sensor failure. The temperature sensor should be tested with a multimeter. If the resistance is 5.7 kohm to 6.3 kohm, then with that everything is drifting.
More tips
If you fail to solve the Electrolux washing error, we recommend that you contact the technical or specialist service. There may be a problem with the machine and need a review. It is also possible that the user is not familiar with the correct way to use the washing machine and a specialist can help you solve the problem.
Other error codes in Electrolux washing machine
Electrolux Washing Machine Error Codes
The following table presents a detailed compilation of error codes, descriptions, causes, and solutions associated with problems that may occur in a washing machine. These error codes provide useful information ...
Troubleshoot error code “Sec.” in Electrolux washing machine
How to eliminate the ERDO ERROR IN ELECTROLUX washer? Error: Sec.Description: Communication problems between FCV and CH. Printed circuit board.Cause: Solution: Change the electronic box. More tips If you fail ...
Troubleshoot error code “Ehf” in Electrolux washing machine
How to eliminate EHF error in electrolux washing machine? Error: Ehf Description: Problem with the identification of the protection circuit. Cause: This error can be caused by various reasons, such as ...