- Error: “F02”
- Description: Overflow Level
- Cause: Water level exceeds the allowed limit
- Solution: Check and correct water supply and drainage
Hisense washing machines are designed to make your daily chores easier, but when something goes wrong, they can display error codes that help us identify and fix issues. If your Hisense washing machine is showing the F02 error code, here’s what it means and how you can fix it.
What Does the F02 Error Code Mean?
The F02 error code on Hisense washing machines indicates that the machine has detected a higher than normal water level, which could be due to a problem with the water supply or drainage.
Steps to Resolve the F02 Error
Check the Water Supply
- Check water pressure: Ensure that the water pressure in your home is adequate for the washing machine to fill properly.
- Clean the filters: The water inlet filters might be clogged. Clean them to ensure an uninterrupted water flow.
- Inspect the drain hose: The hose should not be positioned more than 60 cm above the ground to prevent water backflow.
Inspect the Drainage
- Check the drain pump: Make sure it is not blocked by foreign objects or lint accumulation.
- Examine the drain hose: It should not be bent or obstructed, which could prevent water from draining correctly.
Review Electrical Connections
- Water level sensor connections: Verify that there are no loose or damaged wires that could be affecting the water level reading.
Consider Issues with the Inlet Valve
- Valve operation: If the water inlet valve is not closing properly, it could be allowing an excessive flow of water.
If the Problem Continues
- Reset the washer: Disconnect the washer from the power supply for a few minutes and then reconnect it to reset the system.
- Consult the manual: Check your Hisense washing machine’s manual for more specific instructions for your model.
- Contact a technician: If the problem persists after following these steps, it may be necessary to contact a specialized technician.
Remember to always disconnect the washing machine from the power supply before performing any checks or maintenance to avoid accidents. By following these steps, you should be able to resolve the F02 error code and get your Hisense washing machine back to normal operation.
Other error codes in Hisense washing machine
Errors or Error Codes of Hisense Washing Machine
When your Hisense washing machine starts acting up, the first thing that might come to mind is panic. But, before you get too worried, it's important to know that many ...
Troubleshoot error code “UNB” in Hisense washing machine
How to eliminate the UNB error in Hisense washing machine? Error: UNB Description: Imbalance in loads Cause: Unbalanced load in the drum. Washing single or very small items. Objects or ...
Troubleshoot error code “F24” in Hisense washing machine
How to eliminate the F24 error in Hisense washing machine? Error: F24Description: Electronic module or excess detergent and foam failureCause: Solution: Disconnect the washing machine, disconnect from the electricity grid ...