How to eliminate E07 error in HOOVER washing machine?
- Error: E07
- Description: Excessively fast electric motor three attempts to start the electric motor of the washing machine. And then the washing process is interrupted and the inscription “E07” appears.
- Cause: This error is primarily caused by a malfunctioning tacogenerator. The winding resistance of this component should be around forty-two ohms for a CEZET engine and 156 ohms for a HOOVER electric motor. Often, this issue arises due to a failure in the core of the technical generator, leading to its collapse.
- Solution: The tacogenerator broke. The winding resistance of this part (if working) is approximately equal to forty -two ohms (if the CEZET engine). And for the HOOVER electric motor: 156 ohms. Often, this malfunction appears due to the failure of the core of the technical generator. If he collapsed.
Understanding the E07 Error Code
If your Hoover washing machine is displaying the E07 error code or the LED is blinking seven times before pausing and repeating, it indicates a fault. This code specifically points to a problem with either the door lock or the motor. In some models, an E01 error code may be displayed in case of a door lock fault.
Diagnosing and Resolving the E07 Error Code
Before you proceed with any repairs, ensure that the appliance is switched off and disconnected from the mains for safety reasons. Follow these steps to address the E07 error:
1. Check the Drum
- Spin the drum manually and listen for any squealing or buzzing noises. If present, investigate the motor and the wiring connected to it.
2. Inspect the Door Lock
- If you suspect the door lock is the issue, carefully examine it along with its wiring and connections.
3. Addressing the Issue
- Depending on your findings, you may need to replace parts in either the motor or the door lock. Once the problem area has been attended to, the error message should no longer appear, and your washing machine should function normally.
Prefer Professional Help?
If you’re uncertain about performing the repair yourself, it’s advisable to seek the assistance of a professional engineer.
Other error codes in Hoover washing machine
Troubleshoot error code “E09” in Hoover washing machine
Error: E09 Description: Indicates a short circuit in the motor triac on the electronic control board. Cause: Issue with the component that controls the motor's rotation speed. Solution: Replacement of ...
Troubleshoot error code “E05” in Hoover washing machine
How to eliminate E05 error in HOOVER washing machine? Error: E05 Description: - Problem with the temperature sensor - There is no water heating at the required temperature. An error ...
Troubleshoot error code “E04” in Hoover washing machine
Error: E04 Description: The washing machine has detected too much water in the drum. Cause: This may be due to a leak, a failure in the anti-flooding system, or excessive ...