- Error: E5
- Description: The water level exceeds the preset level.
- Cause: The washing machine detects that the water level inside the drum is excessive, possibly due to a faulty water level sensor or issues with the inlet valve.
- Solution: Verify the connection and operation of the inlet valve and water level sensor. It may be necessary to clean or replace these components.
Steps to Resolve Error “E5”
If your Midea washing machine displays the “E5” error code, it indicates an issue with the water level in the drum. Follow these steps to try and resolve it:
- Check Inlet Valve Connections:
- Ensure that the water inlet hoses are correctly connected, and the water valves are fully open.
- Inspect the Water Level Sensor:
- The water level sensor might be dirty or defective. Check for obstructions or dirt that could cause an incorrect water level reading.
- Clean the Inlet Valve Filter:
- Over time, filters in the inlet valves can get clogged with debris. Clean the filters to ensure proper water flow.
- Restart the Washer:
- Disconnect the washer from the power for a few minutes and then reconnect it. This may reset the system and resolve the issue.
- Check the Inlet Valve:
- If the inlet valve is faulty, it might allow more water than necessary to enter. Replacing the valve may be necessary.
- Consult the User Manual:
- Refer to your Midea washing machine’s user manual for specific instructions on how to access and clean the water level sensor and inlet valve.
- Contact Technical Support:
- If the issue persists after these steps, it’s advisable to contact Midea’s technical support for a professional inspection and repair.
Remember that working with electrical and plumbing components can be dangerous if you lack experience. If you’re not comfortable performing these steps, it’s best to contact a qualified technician.
Additional Tips
- Avoid overloading the washer, as this can affect the water level sensor.
- Use the recommended amount of detergent to prevent excessive foam formation, which could interfere with the water level sensor.
- Perform regular preventive maintenance to avoid future issues with your washing machine.
If you continue to experience problems with the “E5” error code after trying these solutions, there may be a more serious issue that requires professional attention. Don’t hesitate to contact Midea’s customer service for assistance.
Other error codes in Midea washing machine
Washer Midea Error Codes
When it comes to keeping our appliances running optimally, understanding error codes can be a real lifesaver. Specifically, if you own a Midea washing machine, you might encounter some error ...
Troubleshoot error code “Prevent the smell” in Midea washing machine
How to eliminate the error Prevent the smell in the washing machine measures? Error: Prevent the smellDescription: Prevent the smellCause: Solution: Periodically run a tub cleaning cycle to clean the ...
Troubleshoot error code “There is no water or there is not enough water” in Midea washing machine
How to eliminate the error there is no water or not enough water in measures? Error: There is no water or there is not enough waterDescription: There is no water or there ...