- Error: “F2 E3”
- Description: Indicates a possible issue with the appliance control unit, user interface, or associated wiring.
- Cause: It could be due to a communication failure between the control unit and the user interface or a problem in the wiring.
- Solution: Disconnect the washer, wait two minutes, and then reconnect it.
Encountering the “F2 E3” error code on your Whirlpool washing machine can be frustrating and confusing. But don’t worry, here at codigodeerror.com, we’re here to help you understand and resolve this issue.
What Does the “F2 E3” Error Code Mean?
This error refers to a communication problem between the main control unit of the washer and the user interface. This could be caused by a fault in one of these components or an issue in the wiring that connects them.
Steps to Resolve the “F2 E3” Error
Washer Reset
- Disconnect the Washer: Unplug your Whirlpool washer from the power outlet.
- Wait Two Minutes: It’s important to give the appliance time to discharge any static electricity and reset its internal settings.
- Reconnect the Washer: Plug the washer back in after the two-minute wait.
- Test the Washer: Select a cycle and see if the washer starts to operate normally without displaying the error code.
Visual Inspection
- Check the Wiring: Ensure all wires are securely connected and there are no signs of wear or damage.
- User Interface: Check for any moisture or dirt that might be causing a poor contact on the buttons or display.
If the Problem Continues
If after following these steps the “F2 E3” error code still appears, it may be necessary to contact a qualified technician for a more detailed inspection and possible repair.
When to Call a Technician?
If you’ve tried the above steps and the error persists, or if you’re not comfortable performing these actions on your own, it’s advisable to seek professional help. You can contact a qualified technician or schedule a repair service to assist you with your issue.
Additional Tips
- Regular Maintenance: Performing regular maintenance can prevent communication issues between components.
- Cleaning: Keep the user interface clean to avoid failures in the buttons or touchscreen.
- Component Check: If you’ve had previous issues with the motherboard and replacing it was unsuccessful, the problem might be in another component or the wiring.
Remember that at codigodeerror.com, we’re here to assist you with any questions or problems you have with your appliances. Don’t hesitate to reach out for more information and support.
Other error codes in Whirlpool washing machine
Errors or Error Codes for Whirlpool Washer
Troubleshoot error code “F5” in Whirlpool washing machine
