Connect with us
Solve Haier appliance problems faster with practical guides for error codes, fault alerts, and common breakdowns. Get clear steps to diagnose the issue and decide the next move with confidence. Useful for washing machines, refrigerators, ovens, and other home appliances.
Decode the most common alerts and identify which part is failing without wasting time or money.
Lack of water, low pressure, or a clogged filter are usually behind the washing machine filling failure.
The fault points to the drainage system: filter, pump, hose, and wiring are the keys to resolving it without wasting time.
The LD warning points to a drainage problem, with causes ranging from a clogged filter to the pump or the hose.
How to eliminate the error __ in Haier washing machine? Error: __ Description: The washing machine does not work at all. Cause: Solution: • Verify that the power cable...
How to eliminate the error X in Haier washing machine? Error: X Description: Failure in the opening of the washing machine. Cause: • It has exceeded the water temperature...
How to eliminate U3 error in Haier washing machine? Error: U3 Description: Rotation failure Cause: • Clothes is too large or too heavy. • Few pieces of clothes to...
Error: «E12» Description: Drainage error, water not emptied within 4 minutes. Cause: Clogged filter or blocked drain hose. Solution: Clean the filter and check the drain hose for blockage. Encountering...
How to eliminate E11 error in Haier washing machine? Error: E11 Description: The water does not enter the scrubber-base, or the water flow is small. Cause: • The water...
How to eliminate error 8 in Haier washing machine? Error: 8 Description: The door lock flashes 8 times and stops for 4 seconds – water exceeds the level...
How to eliminate error 7 in Haier washing machine? Error: 7 Description: The door lock flashes 7 times and stops for 4 seconds – overheating protection or engine...
How to eliminate error 6 in Haier washing machine? Error: 6 Description: The door lock flashes 6 times and stops for 4 seconds Cause: Silicon Damage Control Deadline Solution: Contact...