Beko
Beko dishwasher stains: causes and ways to improve washing
A better-matched cycle, fresh detergent and sound dish surfaces can all affect how well stubborn marks wash away.

Coffee or lipstick marks left after a Beko dishwasher cycle usually point to a wash program that is too short or too cool for the soil, or to a dish whose surface has worn down. The symptom is listed in Beko troubleshooting guidance, but it is not necessarily a fault code or proof that the appliance has broken. Start by matching the program to the load and checking whether the marks are on the dish itself or simply remain on its surface.
If you have a problem with your dishwasher, you can use our free error code search tool. From there, you can find out what the errors mean and how to resolve them easily and effectively.
What the stains indicate
Coffee contains colored compounds that can cling to cups, while lipstick may leave a combination of pigment and oily residue. If a quick or low-temperature cycle does not provide enough time and heat for the particular load, these marks can remain after washing. Beko’s troubleshooting information therefore recommends choosing a program with a higher wash temperature and longer cycle time when tea, coffee or lipstick stains persist.
The wording describes a cleaning result, not a numbered diagnostic code. A dishwasher can finish its cycle normally and still leave marks if the selected program does not suit the dishes or the kind of residue. That distinction matters: changing the wash conditions may improve the result, whereas a persistent mechanical fault would need a different kind of assessment.
Look at the pattern before drawing a conclusion. A few stained cups after a short cycle suggest a mismatch between the program and the soil. If the same marks appear across a range of items after an appropriate full cycle, the detergent, loading, rinse-aid setting or condition of the dishes may also be involved. One disappointing load does not, by itself, establish that the dishwasher needs repair.
Choose a cycle suited to coffee and lipstick
For cups with coffee residue or dishes marked with lipstick, select a program whose temperature and duration are appropriate for the load, using the options described in the manual for your Beko model. Short programs are designed for particular washing needs and may not provide the same cleaning conditions as a longer, hotter cycle. The precise program names and available settings vary by model, so the control panel or manual is the reliable guide.
A longer cycle is not a universal answer for every load. Delicate items, items marked as unsuitable for dishwashers, and dishes with special care instructions should be treated according to their manufacturer’s guidance. Do not choose a hotter setting for an item unless its care markings allow dishwasher washing at that temperature. If there is no clear dishwasher-safe marking, hand washing may be the safer option.
It can also help to compare like with like. Wash a cup with coffee staining in a suitable full cycle and check whether the result differs from the short program used before. This is a simple way to see whether the program choice is contributing, without changing several settings at once. If the cycle is interrupted or the machine is opened before it finishes, its cleaning result may not reflect the program’s normal performance.
Check whether the dish surface has deteriorated
Some stains become difficult to remove because the surface of the utensil is damaged, worn or otherwise deteriorated. Beko notes that coffee, tea and other dye marks may remain when they have penetrated a compromised surface. In that situation, the dishwasher cannot restore the original finish: a more intensive cycle may clean the item differently, but it cannot reverse wear or remove discoloration embedded in a damaged layer.
Inspect the affected cup, plate or utensil in good light. A rough, scratched, faded or peeling area is a reason to stop treating the mark as an ordinary washing problem. If the color seems to be within the worn finish rather than sitting on top of it, repeated dishwasher cycles are unlikely to bring back the original surface. Follow the item maker’s care advice and avoid using damaged utensils when their condition makes them unsuitable for hygienic food use.
This distinction is especially useful when only one or two older pieces remain stained while the rest of the load comes out clean. That pattern points more strongly to the condition of those items than to a dishwasher-wide failure. Beko advises against washing utensils with deteriorated surfaces in the machine, both because the expected cleaning result may not be achieved and because those items may no longer be appropriate to use hygienically.
Detergent and rinse aid can affect the result
Detergent quality and storage are also worth considering. The Beko DFS05010W manual identifies detergent stored in unsuitable conditions as a possible contributor to staining. Powder detergent exposed to damp air can be affected before it reaches the wash, so keep it in its original packaging in a dry place and close the package securely. If storage is difficult, a detergent format recommended for the appliance may be more convenient, provided it is used as directed.
Use detergent made for automatic dishwashers and follow the product instructions and your appliance manual for the amount. Hand-dishwashing liquid is not a substitute; it can create excessive suds and disrupt operation. Adding more dishwasher detergent than recommended is not a dependable fix for lipstick or coffee marks. The right detergent, kept dry and measured as directed, is more useful than simply increasing the dose.
Rinse aid is chiefly associated with how water drains from dishes and how well they dry, rather than with removing every stubborn stain. Still, the referenced Beko manual advises checking the rinse-aid indicator and adding rinse aid when needed; if the compartment is adequately filled, its setting may be adjustable according to the manual. If marks remain after a suitable wash, this is a safe, accessible check, but it should not be confused with a guaranteed remedy for dye that has penetrated a worn surface.
Loading can limit cleaning
Even a suitable program needs water to reach the surfaces being washed. Cups placed close together, plates pressed against one another or utensils arranged in a way that blocks the spray arms can leave sheltered patches with residue. Load dishes according to the rack layout in the model’s manual, leaving space between items and ensuring that nothing prevents the spray arms from moving freely. These are external checks; there is no need to open the appliance or reach into internal components.
Place cups and bowls so that water can reach their interiors and drain away, rather than collecting in a hollow. Keep lipstick-marked items from being hidden behind larger dishes, and avoid overloading the baskets. If an item is very dirty, gently scrape off food residue before loading it; routine pre-rinsing is not a substitute for the correct program and detergent, and the appliance manual should guide any special loading advice.
After the cycle, compare items from different parts of the racks. If only pieces that were crowded or shielded have marks, improve their spacing on the next load and see whether the result changes. If items throughout the machine remain dirty despite an appropriate cycle and sensible loading, the problem may extend beyond arrangement, and further diagnosis may be needed.
Distinguish stains from haze and water marks
Not every mark left after washing is a coffee or lipstick stain. A cloudy film on glassware, pale mineral traces or droplets after a cycle have different likely causes from colored residue. In the Beko DFS05010W manual, insufficient rinse aid, a water-hardness setting that is too low, inadequate dishwasher salt or salt spilled around the reservoir are associated with lime traces and a misty appearance on dishes or glassware. Those details apply to the symptoms described in that model’s manual and should not be treated as a universal diagnosis for every Beko dishwasher.
Notice the appearance and location of the residue. A brown mark that resembles coffee or a colored smear on the same item is different from an even white film over several glasses. When the problem is haze or limescale, check the rinse-aid indicator and the water-hardness and salt guidance in the manual for your exact model. Add dishwasher salt only as instructed, taking care not to spill it around the filling opening and ensuring the cap is properly closed afterward.
Drying complaints can also be mistaken for poor cleaning. The same manual notes that unloading immediately after a completed program may leave water on dishes, and that short programs can deliver less effective drying. Allow the cycle to finish, then give steam time to escape by opening the door slightly if the manual permits. Let dishes cool before unloading, and take care that water from items above does not drip onto those below. Wet dishes, mineral haze and embedded colored stains are different symptoms, so identify the residue before changing settings.
Safe checks before arranging a technical assessment
Begin with checks that do not require dismantling or reaching into the machine. Confirm that the selected program suits the load, that the detergent is intended for a dishwasher and has been stored dry, and that the baskets are not overcrowded. Check the rinse-aid indicator and follow the model manual for any adjustment. Inspect the affected dishes for worn or damaged surfaces and compare them with items that came out clean.
If the appliance has stopped mid-cycle, shows a separate numbered code or displays a warning light, treat that as a distinct symptom rather than assuming it is the same issue as staining. Record the exact code and model number, then consult the manual for that product. Beko error meanings can depend on the model and product family; a stain complaint alone does not establish which component, if any, is at fault.
Stop at these user-accessible checks. Do not remove panels, handle wiring, probe internal parts or attempt work on the appliance’s electrical or water connections. If the dishwasher leaks, trips the household electrical protection, smells burnt, makes an unusual mechanical noise or continues to wash poorly after the checks above, discontinue troubleshooting and arrange an assessment by a qualified appliance technician. Internal diagnosis and repair are the point at which professional service is appropriate.
When the marks keep returning
A recurring stain has more than one possible explanation, so look for a consistent pattern rather than repeatedly changing settings at random. If the problem follows a particular mug or plate, the dish surface or its care requirements deserve attention. If coffee-stained items improve on a suitable longer, warmer program, the previous cycle may have been too mild. If many different dishes remain marked, review loading, detergent storage and the manual’s guidance before treating the issue as an appliance fault.
For a persistent problem, note which program was used, what kind of detergent was added, whether the rinse-aid indicator showed a need for attention, and which items were affected. This information can help distinguish a program or product issue from a broader loss of washing performance. It is also more useful for a technician than a general description that the dishes are coming out dirty.
There is a practical limit to what a wash cycle can correct. A dishwasher can remove residue from a sound, dishwasher-safe surface when the cycle and detergent suit the load, but it cannot renew a worn finish or guarantee the removal of pigment that has penetrated it. Matching the cycle to the soil, keeping detergent in good condition and retiring unsuitable damaged items are the main distinctions between a correctable wash result and a problem that needs a different response.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine6 days agoMan affected by smoke in Valladolid fire
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















