Drying machine
Whirlpool dryer F22 error: what it means and what to check
Understand the thermistor fault behind F22, which basic checks are safe and when diagnosis needs a qualified technician.

On a Whirlpool dryer, F22 indicates that the control has detected an electrically open motor output thermistor circuit. The thermistor is a temperature sensor, and the code does not automatically mean the motor itself has failed. A sensor, its wiring or the control system may be involved; confirming the cause requires model-specific electrical testing, which should be left to a qualified appliance technician.
If you have a problem with your dryer, you can use our free error code search tool. There you can identify and troubleshoot errors easily and effectively.
What F22 means on a Whirlpool dryer
F22 is associated with the motor output thermistor, a component that helps the dryer monitor temperature. The control expects an electrical signal from the sensor. When it detects an open circuit, meaning the expected electrical path appears interrupted, it can display the code and stop or limit operation. The precise response depends on the dryer model and its control design.
The name can sound as if the motor has definitely failed, but that conclusion is not supported by the code alone. F22 identifies a problem the control has detected in the thermistor circuit; it does not prove which part caused it. The sensor may be faulty, a connection or wire may be damaged, or the control may not be reading the circuit correctly. Those possibilities need to be distinguished through diagnosis, not guessed from the display.
Whirlpool uses different designs across product lines, so an error code should be interpreted for the specific dryer rather than assumed to mean the same thing across every appliance or brand. The model number, usually shown on the appliance’s rating label, helps a technician find the correct service information. If the wording in the manual for your model differs, follow that model-specific guidance rather than treating a general description as definitive.
Why the thermistor circuit matters
A thermistor changes its electrical resistance as its temperature changes. The dryer’s control uses that response as part of its monitoring system. If the control detects an open circuit, it cannot rely on the expected sensor signal, so it may prevent normal operation to avoid running without the information the system is designed to monitor. That protective response is one reason the machine may not complete a cycle after F22 appears.
The reference information for this fault gives a resistance of approximately 10,000 ohms for the thermistor. That figure is not a universal measurement target for every temperature or every Whirlpool model. Resistance changes with temperature, and the correct test conditions and specifications must come from the service information for the exact appliance. A number measured without that context can be misleading, even if the meter reading seems close.
For that reason, measuring the component is not a safe or reliable household check. Reaching it may require removing panels and accessing internal wiring, and electrical testing should not be carried out while the dryer is connected to power. A technician can inspect the circuit under the correct conditions and determine whether the sensor, its connections, wiring or control electronics are responsible. The displayed code alone cannot make that distinction.
What may cause the code to appear
A defective thermistor is one possible explanation because an internal failure can interrupt the sensor circuit. However, a sensor is only one part of that circuit. A loose, damaged or disconnected wire, a poor connection, or a fault in the control system can also prevent the expected signal from reaching the control. These are possible fault paths, not confirmed causes for every dryer showing F22.
The original fault description also identifies the power supply, the motor control unit, drum restriction, excess load and physical damage in the drive system as areas that may need checking. These are not all equivalent explanations for an open thermistor circuit. Rather, they are additional checks a technician may consider when diagnosing the appliance, particularly if there are other symptoms or the dryer has experienced an obstruction or unusual strain.
Overloading or a drum that cannot move freely can place extra strain on the appliance, but neither should be treated as proof of the cause of F22. Likewise, a supply problem or a motor-control issue requires proper assessment; a user should not open the dryer or test electrical components to investigate. Separate the direct code meaning from related checks: F22 points to an open thermistor circuit, while other observations may help a technician assess the wider system.
Safe checks to make before arranging a diagnosis
Start with the checks that do not require opening the dryer. Turn the appliance off and allow it to cool. Look inside the drum for a garment or object that is visibly caught, and remove only items that are easy to reach without forcing any part of the machine. Check that the load is not unusually heavy and that the door closes normally. These observations can rule out simple operating conditions, but they do not test the thermistor circuit.
Clean the lint filter according to the owner’s manual and check any other user-accessible filter or vent area the manual identifies. A blocked filter may affect drying performance, although it is not, by itself, confirmation of what triggered F22. Keep the checks to accessible areas intended for routine cleaning; do not remove covers or reach past guards. Do not force the drum, pull on wiring or try to reach internal components.
If the plug is accessible and the area is dry, you may switch the dryer off and disconnect it at the plug before leaving it unused. Do not handle the plug with wet hands, use a damaged cord or attempt to inspect the socket internally. A basic visual check can reveal an obvious sign of damage, but testing the household supply or opening electrical connections is not a user task. If the outlet, plug or cord looks damaged, stop using the dryer and have the electrical issue assessed by an appropriately qualified professional.
Resetting the dryer does not repair an open circuit
After checking the door, load and accessible filters, a single restart may help establish whether the display was temporary. Switch the dryer off, wait as directed in the owner’s manual, then restore power only if the plug and surrounding area are safe. The manual takes priority because restart instructions can differ by model. If F22 returns, treat it as an active fault rather than repeatedly cycling the appliance in the hope that the warning will disappear.
A reset cannot reconnect a damaged wire or restore a failed sensor. It may clear a temporary control state, but a code that reappears points to a condition the machine continues to detect. Avoid repeated starts if the drum does not move normally, the machine makes an unusual noise, there is a burning smell, or the cord or plug appears damaged. Stop using the dryer if you notice a sign of overheating or electrical damage.
Keep track of when F22 appears and what the dryer was doing immediately beforehand. Note whether it happens as soon as the appliance starts, partway through a cycle or after an interruption, and whether any other warning or unusual symptom appears. This information does not diagnose the fault, but it gives the technician useful context and can help distinguish a persistent circuit problem from a broader operating issue.
When a qualified technician needs to take over
Professional diagnosis is appropriate if F22 remains after the safe external checks, returns after a restart or prevents the dryer from operating normally. Confirming an open thermistor circuit involves access to internal components and electrical measurements. A qualified appliance technician can follow the service procedure for the specific model, check the sensor at the specified temperature, inspect the connections and wiring, and assess the control system if needed.
The technician may also check the power supply, motor control unit, drum movement, load-related strain and drive system where the symptoms justify it. Those inspections should not be attempted by removing panels or reaching into the appliance. Dryers contain electrical components and moving parts, and some areas may remain hazardous even when a cycle has stopped. Internal testing and component replacement belong with a qualified professional.
There is no reliable repair price or fixed repair time that can be inferred from F22 alone. The cost depends on what has actually failed, the dryer’s model and the work required; a thermistor diagnosis is not the same as a wiring or control-board diagnosis. Avoid buying a replacement part based only on the code, because replacing the sensor will not solve the problem if the interruption lies elsewhere in the circuit.
Details that help identify the right fault
Before a technician examines the dryer, record the complete model information from its rating label and the exact display code. If the appliance shows F22 intermittently, note how often it happens and whether the timing is consistent. A brief description of the load, whether the drum appeared obstructed and whether the filter was clean can also provide context, without implying that any one of those conditions caused the thermistor fault.
Use the manual for the exact dryer when looking up user-level maintenance or restart instructions. General advice for another Whirlpool model, a washer-dryer or a different brand may describe a different component or procedure. F22 should not be given a universal meaning outside the appliance range it applies to; the model-specific documentation and a proper inspection are what turn a general code description into a confirmed diagnosis.
Until the cause is confirmed, keep routine checks modest: clean accessible filters, remove an obvious obstruction without force, avoid an excessively heavy load and stop using the appliance if there are signs of damage. These measures can address simple conditions around the drum, but they do not replace testing of the thermistor circuit. If the error persists, leaving the dryer off until it has been assessed is more sensible than repeatedly restarting it.
F22 is a circuit warning, not a part diagnosis
The most useful distinction is simple: on the Whirlpool dryers covered by this description, F22 signals that the control has detected an open motor output thermistor circuit. The sensor is a likely area of investigation, but the code alone does not establish whether the sensor, its wiring, a connection or the control system is at fault. The approximately 10,000-ohm reference also needs the correct model and temperature conditions to be meaningful.
Accessible cleaning, checking the load and looking for an obvious obstruction are reasonable first steps; opening the cabinet, measuring internal electrical resistance or replacing components is not. If the warning remains, a qualified technician should trace the circuit using the appliance’s service information. That approach avoids replacing parts on guesswork and keeps electrical diagnosis where it belongs: with someone equipped to perform it safely.
More error codes: Whirlpool Dryer Error Codes: A Useful and Comprehensive Guide.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine7 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine7 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine3 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Magazine7 days agoXiaomi launches steam air fryer in Spain for €179.99
Daikin7 days agoDaikin heat pump error codes: meanings and safe checks
Magazine7 days agoMan affected by smoke in Valladolid fire
Air fryer7 days agoCecotec air fryer E1 error: what to do safely
Heat pump6 days agoHitachi heat pump error codes: meanings and safe solutions
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Magazine6 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Magazine5 days agoENISA warns home appliances could be the next cyberattack target
Boiler6 days agoImmergas boiler error codes: meanings and safe solutions





















