Connect with us

Fridge

Teka fridge error codes: meanings and safe checks

An alarm does not always mean a broken part: the model, actual temperature and complete message make the difference.

Published

on

Interior y junta de un frigorífico Teka durante la comprobación de un aviso de error

A warning on your Teka fridge may indicate an out-of-range temperature, an incorrect sensor reading or a defrost problem. The meaning depends on the model: the table for the RBF ranges described here should not automatically be applied to every fridge from the brand. Before resetting anything, record the full message, check that the doors close properly and establish whether the food is still cold. If the appliance can no longer keep food properly chilled, move perishable items to another appliance that is working correctly.

If you have a problem with your fridge, you can use our free error code finder. It can help you identify errors and find clear, practical guidance on resolving them.

The model determines how to interpret the warning

On certain electronic No Frost fridges in the RBF range, messages fall into sensor faults, cooling or defrost problems, and temperature alarms. Some references include the SR prefix, while others combine letters and numbers. Recording the complete display sequence helps prevent confusion between warnings, particularly when characters alternate or appear alongside an alarm symbol.

The appliance identification details are on its rating plate, which is usually accessible from inside without removing any panels. The product name, model reference and a photograph of the control panel allow the message to be checked against the appropriate manual. If the naming system does not match the table, do not assume an equivalent meaning based on resemblance: an E1 code on another Teka appliance does not explain a fault on your fridge.

It is also important to distinguish the selected temperature from the measured temperature. The number normally shown on the display may be the target setting rather than a live reading from inside. A thermometer suitable for fridge use can help track changes, although a single reading taken just after opening the door is not enough to diagnose a loss of cooling performance.

RBF range messages and the limits of their interpretation

This table covers the naming system in the RBF technical documentation described for these appliances. Its application requires confirmation of the exact fridge reference. The causes shown guide the investigation, but do not confirm a faulty part: the controller may detect an incorrect signal without being able to distinguish between the sensor, its connection and the electronics interpreting it.

The terms defrost sensor and fridge compartment defrost sensor refer to separate components here. To avoid confusing them, the compartment is specified wherever the description allows. Combined codes indicate several affected readings, not an instruction to replace every sensor involved.

CodeDescriptionCause or detected conditionAppropriate action
SR FE01Freezer sensor fault.Abnormal reading from the sensor, its connection or the control circuit.Check food storage conditions and arrange professional diagnosis.
SR FE02Fridge sensor fault.Incorrect signal from the refrigerated compartment sensor.Check the internal temperature and arrange an inspection.
SR FE03Defrost sensor fault.Abnormal reading from the sensor associated with defrosting.Do not access the evaporator; professional inspection is required.
SR FE04Fridge compartment defrost sensor fault.Incorrect reading from that sensor or its circuit.Arrange inspection of the relevant system.
SR FF12Freezer and fridge sensor faults.Abnormalities detected in both signals.Obtain professional diagnosis before buying replacement parts.
SR FF13Freezer sensor and defrost sensor faults.Incorrect readings in the two specified circuits.Professional inspection of sensors, connections and controller.
SR FF15Freezer sensor and fridge compartment defrost sensor faults.Abnormalities in both readings.Arrange diagnosis of the affected system.
SR FF23Fridge sensor and defrost sensor faults.Incorrect signals from both sensors.Professional inspection without household dismantling.
SR FF25Fridge sensor and fridge compartment defrost sensor faults.Abnormalities in both measuring circuits.Professional assessment of the signals.
SR FF35Faults in the two defrost sensors identified in this range.Abnormal readings from the defrost sensor and the fridge compartment defrost sensor.Professional inspection of the measuring system.
SR FH02Freezer, defrost and fridge compartment defrost sensor faults.Three temperature signals affected.Investigate possible shared circuit elements as well.
SR FH04Freezer, fridge and defrost sensor faults.Simultaneous abnormalities in those three readings.Obtain professional diagnosis before replacing components.
SR FH05Freezer, fridge and fridge compartment defrost sensor faults.Three measuring circuits with incorrect signals.A technician must inspect the sensors, connections and controller.
SR FH06Fridge, defrost and fridge compartment defrost sensor faults.Abnormalities in the three identified signals.Arrange professional inspection.
SR FU00Fault involving all sensors covered by this diagnostic system.Widespread incorrect readings.Diagnose the complete circuit; do not assume every sensor is broken.
SR FO05Cooling problem associated with compressor operation.The defrost sensor reads above −10 °C after 10 minutes of operation, according to this control logic.Diagnosis is required; the code alone does not prove that the compressor is faulty.
SR FO06Defrost cycle fault.The defrost sensor does not reach 0 °C during the intended process.Do not force service cycles; arrange a defrost system inspection.
Dash on both displaysLow supply voltage warning.Voltage below 170 V in the range described.Do not measure or work on the electrical installation; this requires a qualified professional.
CO01Freezer temperature alarm.The freezer sensor does not fall below −10 °C.Check door closure, recent loading and the temperature trend.
CO02High fridge temperature alarm.The sensor exceeds 10 °C while holiday mode is inactive.Check the door, internal airflow and food storage conditions.
CO03Fridge temperature too low alarm.The fridge sensor reads below −5 °C.Check the setting and arrange diagnosis if it persists.
CO04High temperature alarm in both compartments.The fridge exceeds 15 °C and the freezer is above −10 °C.Protect the food and check whether cooling recovers.

The thresholds in this table describe appliance detection conditions; they are not recommended food storage temperatures or permission to wait until those values are reached. The visible format may also vary between control panel versions. If your display shows only part of the sequence, record what appears rather than guessing the remaining characters.

A temperature alarm does not mean a broken compressor

CO01, CO02 and CO04 describe insufficient cooling in one or both compartments. A door that has not closed properly, a recent load of food or a power interruption may explain a temporary temperature rise. The deciding factor is what happens afterwards: whether the temperature falls again or remains high changes the assessment of the problem.

CO03 needs a different interpretation: according to its sensor, the refrigerated compartment is too cold. Lowering the setting further will not resolve that situation. Check the temperature selection and watch for products freezing in areas where they previously stayed chilled. If this continues, the temperature regulation needs checking, even though the appliance is still producing cold air.

The RBF control logic described includes periods when certain temperature alarms are suppressed: the first 6 hours after connection, during defrosting, the 2 hours following defrosting and the 2 hours after opening the door. These are not universal periods for every Teka model, nor do they necessarily apply to every fault. Consequently, the absence of an alarm does not guarantee a suitable temperature.

The decision to keep using the fridge should depend on its actual ability to store food safely, not on whether the beeping has stopped. Silencing an alarm only changes the warning, where the model offers that function. If the interior continues warming, leaving perishable food inside creates a food storage risk; smell and appearance alone cannot confirm that it remains safe.

Sensor faults are not a reason to buy parts without diagnosis

Sensors convert temperature into a signal interpreted by the electronic controller. If that signal falls outside the expected range, the fridge may show FE01, FE02 or another message from the same family. The error identifies the circuit requiring investigation, but does not automatically distinguish a faulty sensor from a damaged connection or an incorrect reading by the control board.

This distinction is particularly important with FF, FH and FU00. Several abnormal signals appearing together require shared components to be considered before assuming that several sensors have failed simultaneously. Nor does this alone prove that the electronics need replacing. Instrument-based testing and matching each part to the model belong to professional diagnosis.

Buying a replacement solely because it matches the code can add expense without correcting the cause. Even if a part looks identical, its appearance does not establish compatibility. The useful contribution a user can make is to keep the message, appliance reference and observed symptoms; measuring resistance or checking internal wiring falls outside safe household checks.

Ice and defrost problems can explain reduced cooling

A No Frost fridge needs to remove ice from the evaporator periodically to maintain heat exchange and airflow. When that process fails, ice may build up where it should not and performance may decline. SR FO06 points to a defrost cycle condition not being met, but does not identify a particular heater as the confirmed cause.

Professional inspection may cover sensors, heating elements, protective devices and defrost control. Users should only observe what is visible without removing panels: ice accumulation, blocked internal outlets or food pressed against vents. Do not use knives or direct heat to remove ice; you could damage surfaces and reach parts of the refrigeration circuit.

If the manual provides for user defrosting, follow its instructions and protect the food in another appliance. Cooling returning afterwards does not prove that the fault has gone: removing ice can relieve the effect without resolving its cause. The problem returning is important information for the technician, not a reason to repeat the same action indefinitely.

SR FO05 also needs careful interpretation. The control logic described detects that a particular temperature condition has not been reached after 10 minutes of operation; it does not directly measure the mechanical condition of the compressor. A cooling problem may require several components to be investigated. The refrigerant circuit, its pressures and any compressor work are strictly for appropriately qualified professionals.

What you can check without dismantling the fridge

A useful check starts with door closure. A protruding container, misplaced drawer or dirt on the seal may leave a barely visible gap that lets warm air in. Clean accessible seals using the method specified in the manual and check that nothing obstructs their contact. Do not force hinges or mechanisms to compensate for a door that does not fit correctly.

Inside the compartments, keep air outlets clear and avoid pressing food against the vents. Outside, leave accessible ventilation openings unobstructed, without pulling out an integrated appliance or removing covers. The principle is straightforward: cold air needs to circulate; a wall of containers in front of an outlet can unbalance temperatures even while the appliance is running.

Check the settings and active modes as well. On the RBF models described, the fridge can be set from 2 to 8 °C and the freezer from −16 to −24 °C. These are setting ranges for that family, not instructions for every model. Holiday mode sets the fridge to +16 °C and the freezer to −18 °C: it is not suitable for perishable food in the refrigerated compartment.

Noise is not a diagnosis on its own either. Hearing the compressor does not confirm adequate cooling, and a quiet period may be part of normal operation. Consider the sound alongside the temperature, message and presence of ice. If there is a burning smell, smoke or visible damage to the power supply connection, do not continue testing or handle the connection; seek professional help.

A reset does not necessarily remove the cause

Before any reset allowed by the manual, keep a photograph of the warning and note whether it appeared after a power cut, a prolonged door opening or a recent load of food. Repeated resets can remove useful context without restoring cooling. In the range described, settings remain stored after a power outage, so disconnecting the appliance is not the same as restoring factory settings.

Demonstration mode deserves attention if the panel is active but the appliance does not cool. On certain RBF models, it is identified by alternating dE and On messages displayed every 10 seconds. This mode can remain active after a power interruption. Check the exact manual for cancellation instructions: button combinations are not universal and should not be confused with access to service diagnostics.

Other indicators do not necessarily mean a fault either. In the ECO mode described, E may appear, while holiday, rapid cooling and lock symbols indicate selected functions. The manual confirms the distinction between status and failure. Do not enter service tests in search of a solution: they may activate components or cycles that are not intended as everyday user checks.

The next step depends on diagnosis, not the code alone

An authorised technician takes over where accessible checks end: persistent sensor messages, defective defrosting, cooling that fails to recover or supply abnormalities. A display photograph, model details and the temperature trend in both compartments provide more value than an improvised interpretation. There is no need to open the appliance to gather that information or decide that an inspection is now necessary.

A code cannot establish a reliable repair price either. A reading problem and a refrigeration circuit fault may involve very different work. Before accepting an intervention, establish what diagnosis includes and whether call-out and labour charges are separate. When weighing repair against replacement, compare the total cost with the overall condition of the appliance, its age and spare part availability, rather than applying an automatic financial rule.

If warranty coverage may apply, check its terms before authorising work or buying parts. This page helps inform the enquiry, but Código de Error does not repair appliances or handle warranties. The soundest decision combines model, message and actual temperature: three details that help distinguish a usage-related issue from a fault and protect what matters while the cause is established.

This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.

Most read