Miele
Miele washer error F2: what it means and what to check
A temperature-sensor fault is the usual explanation for F2, but the model matters when interpreting the code.

On many Miele washing machines, F2 indicates a problem with the NTC temperature sensor, often described as an open circuit. The sensor monitors water temperature, so a fault can affect how the washer heats or manages a cycle. The precise meaning can vary by model, and the code alone cannot confirm which part has failed. Do not open the machine or test electrical components yourself; a technician can verify the sensor and its circuit safely.
If you have a problem with your washing machine, you can use our free error code search tool. There you can identify and troubleshoot errors easily and effectively.
What F2 means on a Miele washer
The F2 fault is associated with the NTC probe, a temperature sensor whose electrical resistance changes as it warms or cools. The control system uses that signal to estimate the water temperature during a wash. If the sensor reading is missing or outside the expected range, the machine may register a fault and interrupt or limit the cycle. F2 is therefore a temperature-sensing warning, not a universal diagnosis of one specific failed part.
In the reference information for this error, F2 is described as an NTC probe problem and an open circuit. That points to a break or interruption somewhere in the sensor circuit, but the code does not establish whether the sensor itself, its wiring, a connector or another part of the control system is responsible. The exact interpretation depends on the washer’s model and electronics, so its model number is important when checking manufacturer-specific information.
A machine that does not heat water as expected may draw attention to a temperature-related fault, but cold laundry by itself does not prove that F2 is present or that the NTC sensor has failed. Wash programs may use different temperatures, and the selected setting, load and cycle stage all affect what a user notices. Use the displayed code together with the model information and the washer’s behavior, rather than diagnosing the cause from one symptom alone.
How the temperature sensor relates to the wash cycle
The NTC sensor is named for its negative temperature coefficient: as its temperature rises, its resistance generally falls. The washer’s control system reads the resulting signal and uses it to regulate the cycle. If that signal is absent or implausible, the machine may be unable to determine whether water has reached the intended temperature. Depending on the model and the point in the program, the cycle may stop, fail to heat correctly or display a fault.
This explains why a sensor-related code can appear even when the drum, door and water supply seem normal. The temperature probe is part of a monitored electrical circuit inside the appliance, not an external control the user can reset or adjust. A fault can arise from the probe, a connection or a related electronic component, and distinguishing among those possibilities requires measurements and inspection by someone qualified to work on the appliance.
The reported reference readings for the sensor are approximately 14.9 kilohms at 20 degrees Celsius and 12 kilohms at 25 degrees Celsius, with a stated tolerance of plus or minus 750 ohms. These figures describe an expected resistance under particular conditions; they are not a do-it-yourself test. They should be treated as technical reference values, not a promise that every Miele model uses identical specifications. A technician should consult the service information for the exact washer before assessing a reading.
What can be checked without opening the appliance
Begin with observations that do not require tools or access to internal parts. Note the full code exactly as it appears, whether it returns after restarting the cycle, and what the washer was doing when it appeared. Record the model information from the appliance’s identification label if it is safely accessible. Those details help distinguish an F2 indication on one model from similar-looking codes or different diagnostic meanings on another.
If the cycle has stopped, follow the user manual’s instructions for ending or resetting the program. A single restart may show whether the display was temporary, but a reset cannot repair a failed sensor or damaged circuit. If F2 returns, or the same heating problem continues, avoid repeatedly restarting long cycles in the hope that the warning will disappear. A recurring fault needs a diagnosis rather than repeated resets.
It is also reasonable to check ordinary external conditions, such as whether the door is properly closed and whether the selected program is intended to heat water. These checks can rule out simple misunderstandings about the cycle, but they do not test the NTC probe. Do not remove panels, reach behind the drum, disconnect wires, probe terminals or attempt to measure resistance. The sensor circuit is inside the washer, and electrical testing belongs to a qualified appliance technician.
Why the code does not identify a replacement part
Error codes narrow the search; they do not always name the component that must be replaced. With F2, the reported association with an open NTC circuit gives a technician a direction for diagnosis, not a definitive parts order. The source of an interrupted reading could be the sensor, its connections or wiring, or another fault affecting the measurement. Replacing a part based solely on the code may leave the underlying issue unresolved.
Miele washers span different generations and product families, and their diagnostic systems are not necessarily identical. A code should be interpreted for the specific appliance, using its model details and appropriate service documentation. The model information is commonly found on the type plate; consult the owner’s manual for its location if it is not obvious. Do not assume that a code description found for another model applies without checking compatibility.
For the same reason, online descriptions that recommend checking internal cables, fuses or electronic boards are not instructions for an untrained owner. Those tasks can involve live electrical components or require access inside the cabinet. A qualified technician can isolate the appliance appropriately, inspect the circuit and compare measurements with the correct specification. The user-facing takeaway is simple: external observations are safe, but internal electrical diagnosis is not a routine household check.
Other Miele codes that may appear in the same discussion
Several other Miele fault codes are often discussed alongside F2, but they point toward different areas of the washer. The descriptions below reflect the available general reference material, not a complete diagnostic chart for every model. In particular, F1 and F2 are both associated with the NTC temperature sensor in that material, while F10 and F11 relate to water intake and drainage. Always verify a code against the documentation for the exact machine.
| Code | Description | Cause indicated in the reference information |
|---|---|---|
| F1 | Temperature-sensor fault | NTC sensor issue |
| F2 | Temperature-sensor fault, described as an open circuit | NTC probe or its circuit |
| F10 | Water intake problem | Possible supply restriction, kinked hose or valve fault |
| F11 | Drainage failure | Washer is unable to drain properly |
| F20 | Heating fault | Possible heating element or NTC sensor issue |
| F56 | Motor or load-related fault | Possible motor issue or unbalanced load |
This comparison is useful for separating a temperature-sensing warning from faults involving water flow, drainage, heating or the motor. It should not be used to infer that every code has the same cause across all Miele product lines. Even where a short description sounds familiar, the troubleshooting path may depend on the model, software and symptoms. F2 should not be confused with F10, F11 or other codes simply because they occur during the same wash.
If another code appears after F2, record both and the order in which they were displayed. A second fault can provide useful diagnostic context, but it does not automatically prove that the first error caused it. Avoid clearing the display repeatedly before noting the information, since the sequence and cycle conditions may help a technician understand what happened.
When a technician should take over
Professional diagnosis is appropriate when F2 returns after the user-manual reset, when the washer repeatedly stops before completing a cycle, or when it appears unable to heat as expected. The same applies if there is visible damage to the appliance, an unusual burning smell, water where it should not be, or any sign that the machine is unsafe to use. Stop using it if you notice a safety concern, and follow the manufacturer’s instructions.
At that point, diagnosis may involve checking the temperature probe’s resistance, inspecting its connections and wiring, and assessing the related control circuit. The reference readings of 14.9 kilohms at 20 degrees Celsius and 12 kilohms at 25 degrees Celsius can inform that work, subject to the tolerance and model-specific specifications. These checks require access to internal electrical components and should be carried out by a qualified appliance technician.
There is no reliable repair cost or completion time that can be stated from the F2 code alone. The final work depends on the confirmed cause, the washer model, parts availability and local labor rates. A sensor fault and a problem in its wiring or control circuit are not necessarily the same repair. Any estimate should be based on a diagnosis of the actual appliance, rather than on the code in isolation.
Using the washer while F2 is displayed
Whether the machine can continue a cycle depends on how its controls respond, but an active temperature-sensing fault means the washer may not be monitoring water temperature correctly. A program that depends on heating could run differently than intended or stop before completion. Do not assume that a cycle is operating normally just because the drum still turns or water enters the machine.
For a persistent F2 indication, the cautious choice is to stop relying on the washer for heated cycles until the cause is identified. Follow the appliance manual for safe handling of a paused cycle and any water remaining in the drum. Do not attempt to bypass the sensor, defeat a warning or force the machine to continue. Bypassing a temperature-monitoring fault removes a safeguard without resolving the fault itself.
If the code appeared once and does not return after the manual’s recommended reset, continue to monitor the appliance and note any recurrence. A one-time display does not by itself confirm a failed component, but repeated warnings deserve attention. Clear notes about the program, timing and behavior are more useful than speculative part replacements or attempts to open the washer.
A model-specific diagnosis is the reliable next step
F2 on a Miele washer is commonly linked to the NTC water-temperature sensor, with an open circuit among the reported interpretations. That is a useful starting point, not a complete diagnosis: the sensor, its circuit and related electronics may need to be distinguished through model-specific testing. The code’s exact significance can vary across product families, so identifying the washer accurately matters.
Users can safely record the display, check the selected program, consult the manual and try only the reset procedure it recommends. Internal inspection and electrical measurements are different kinds of work. Once the fault persists or points to the sensor circuit, leave diagnosis and repair to a qualified technician, rather than removing covers or handling wiring. That boundary protects both the user and the appliance while preserving the information needed to identify the real cause.
More error codes: Miele washing machine error codes: what they mean and what to do.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine7 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine7 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin7 days agoDaikin heat pump error codes: meanings and safe checks
Magazine7 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer7 days agoCecotec air fryer E1 error: what to do safely
Magazine7 days agoMan affected by smoke in Valladolid fire
Heat pump6 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine6 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Magazine5 days agoENISA warns home appliances could be the next cyberattack target
Boiler6 days agoImmergas boiler error codes: meanings and safe solutions





















