Samsung
Samsung washer 4E error: causes and safe checks
Find out why the washer is struggling to fill, which checks are safe and when the fault needs professional diagnosis.

A Samsung washer displaying 4E, or 4C on many newer models, has detected that water is not reaching the drum at the expected rate. The usual causes are a closed tap, weak household water flow, a kinked inlet hose or debris restricting an inlet filter. The code points to a water-supply problem, not automatically to a failed part, so start with the supply and other checks you can make without opening the appliance.
If you have a problem with your washing machine, you can use our free error code search tool. From there, you can identify and troubleshoot errors easily and effectively.
What the 4E code means on a Samsung washer
The washer needs a steady supply of water to begin washing and to carry out parts of a cycle. When it cannot fill within the time allowed by its controls, it may stop and show 4E. On many Samsung models, 4C signals the same general kind of filling problem, although the exact display and troubleshooting details can vary by model and market. Use the code together with the model’s owner’s manual, especially if the display shows an additional symbol or the machine behaves differently from the description here.
A supply warning does not identify the failed component by itself. Water might be unavailable at the tap, flow might be reduced by a bent hose or clogged screen, or the washer may not be detecting the incoming water correctly. A detergent drawer blockage can also affect water entering the drum on some models. These possibilities explain why a machine may stop even when the tap appears to be open; the code is a starting point for diagnosis, not proof of a particular repair.
The 4E and 4C alerts should not be confused with Samsung drainage codes. A washer that fills but cannot pump water out has a different problem, and a drain-related code such as 5E or 5C generally directs attention toward drainage rather than the incoming supply. Noting whether the cycle stops before filling, during filling or after washing can help distinguish these situations before any further checks.
Start with the household water supply
Check that the water tap serving the washer is fully open and that other nearby faucets have normal flow. If the household supply is interrupted or noticeably weak, the washer may not receive enough water to proceed. A recent plumbing shutdown, maintenance work or wider pressure problem can be relevant, particularly if the warning appeared suddenly and more than one fixture is affected. When other taps also run poorly, the issue may be outside the washer, so the appliance itself may not be at fault.
Samsung’s guidance gives an operating water-pressure range of 0.5 to 8 bar for the models covered by that information. This is useful context, but it is not a reason to attempt a pressure test or adjust plumbing equipment. Requirements can differ by model, so check the manual for the washer’s exact specification. If household flow seems persistently low, a qualified plumber or the water provider can assess the supply safely.
Also look at the visible portion of the inlet hose from the tap to the washer. A machine pushed tightly against a wall can flatten or sharply bend the hose, restricting flow much like a pinched straw. Straighten an accessible bend and leave enough room behind the appliance to prevent it happening again. Do not pull the washer around if it is heavy, unstable or connected in a way that makes moving it unsafe; a qualified professional can reposition it.
Look for hose and connection problems
With the washer in place, inspect the hose for obvious damage, crushing or a sharp kink. The hose should not be trapped beneath the appliance or stretched taut across the floor. A cracked, bulging or leaking hose needs attention rather than continued use. Do not try to repair a damaged hose with tape; arrange replacement with a suitable part through an appropriate service provider.
Some washers connect to both hot and cold supplies, while other installations or models may use a different arrangement. If the installation has separate hoses, compare their positions with the labels on the washer and the directions in its manual. A crossed connection or a tap that is closed can interfere with filling. Avoid disconnecting hoses simply to investigate, particularly if you are unsure how to isolate the water or restore a secure, leak-free connection.
A hose that looks normal from the outside may still have a restriction inside, but tracing that fault can require disconnecting the water supply. That is a sensible point to stop if the tap is stiff, the connections are difficult to reach, or you do not know how to shut off the supply safely. Water connections must be restored securely and checked for leaks; if there is any doubt, leave this work to a qualified technician or plumber.
Inlet screens can restrict the flow
Small mesh screens at the water inlets catch grit and sediment before they enter the washer. Over time, debris or mineral deposits can reduce the amount of water passing through, even though the household tap is open and the hose is not kinked. Samsung recommends cleaning these screens at least twice a year in the guidance cited for this issue. Homes with older plumbing or sediment in the supply may need more frequent attention, but the washer’s own instructions should take precedence.
On some models, the screens are accessible where the inlet hoses meet the appliance; their position and removal method are not universal. Consult the manual before attempting routine cleaning. If the instructions permit it and the work is straightforward, first shut off the water supply as directed, then follow the model-specific guidance. Do not force a screen out, use sharp tools, or reach into the washer to get at a part that is not designed for user access. Stop if a connection will not loosen easily or water cannot be isolated safely.
After any permitted cleaning, the hose connections must be restored as the manual specifies, and the area should be checked for drips before the washer is used. A leak, damaged connection or screen that will not seat properly needs professional attention. Cleaning the filter is preventive maintenance, not a solution for every 4E alert: if the code returns despite a clear screen and adequate supply, the cause may lie within the machine.
Check the detergent drawer and the cycle
On some Samsung washers, an obstruction in the detergent dispenser can interfere with water flowing into the drum and may be associated with a 4C alert. Residue from detergent or fabric softener can build up over time, while an item lodged in the drawer housing may obstruct the path. Remove the drawer only as described in the user manual, inspect its accessible surfaces and rinse away residue if the manual permits. Keep cleaning to parts designed to be removed by the user; do not dismantle the dispenser housing.
Once the drawer is clean and dry, reinstall it fully and check that it slides into place without catching. Use the detergent type and amount recommended for the washer, since excess product can leave more residue behind. Some newer models have automatic dispensing compartments, which may have their own instructions for cleaning and refilling. Do not pour water into hidden channels or remove internal tanks unless the model’s manual explicitly describes that as routine user maintenance.
If the code appeared during one particular cycle, note the stage at which the washer stopped and whether it had begun filling. After correcting an obvious, safe issue, a normal restart may allow the washer to resume or clear a temporary alert; follow the manual for the correct restart procedure. There is no need to enter a diagnostic mode or use a special button sequence. If the same code comes back, repeated resets will not fix a continuing restriction or an internal fault.
When the cause may be inside the washer
If the tap is open, household flow is normal, the visible hose is undamaged and the accessible drawer is clear, a recurring 4E or 4C alert needs further diagnosis. Possible causes include a blocked or faulty inlet valve, a water-level sensing problem, a wiring fault or a control issue. The code alone cannot establish which one is responsible. These components are inside the appliance and are not user-maintenance parts.
Do not remove panels, handle internal wiring, test live voltage, use a multimeter on electrical parts or bypass a sensor. Such work can expose a person to electric shock, cause water damage or make the washer unsafe to operate. A qualified appliance technician can inspect the inlet system and controls using model-specific information and appropriate safety procedures. If the machine is still covered by a warranty, check its terms before arranging work that could affect coverage.
Switch the washer off and stop using it if water is leaking, a hose is damaged, the appliance smells burnt, or its display shows other signs of an electrical problem. Do not touch wet electrical connections or attempt to open the machine. For ordinary recurring fill alerts without those warning signs, professional diagnosis is still appropriate when the basic supply checks have not resolved the issue, but there is no need to assume the washer must be replaced.
How this alert differs from other Samsung codes
Samsung uses different codes to identify different parts of a wash cycle, and their meanings can vary with model and product generation. The codes below reflect common washer meanings reported in the available guidance; the owner’s manual remains the best reference for a specific machine. A similar-looking code is not necessarily evidence of the same fault, so avoid applying a fix for a different alert.
| Code | Description | Likely cause |
|---|---|---|
| 4E / 4C | Water supply or filling problem | Restricted household supply, closed tap, kinked hose or obstructed inlet screen |
| 5E / 5C / SE | Drainage problem | Water is not draining as expected; a blocked accessible drain filter or hose may be involved |
| UB / UE / u6 | Unbalanced load | Laundry is unevenly distributed or the washer cannot balance the load for spinning |
| dC / DC | Door or door-lock alert | The door may not be fully closed, or the machine may not detect it as secured |
| Sd / SUD | Excessive suds | Too much detergent or detergent unsuitable for the washer may create excess foam |
| NF / ND | Fill or drainage alert on some models | Model-specific code; consult the manual rather than assuming it matches another Samsung code |
The distinction matters most when water is already inside the drum. If the washer fills and then stops with water remaining, a drainage alert is more likely than a supply alert. If the machine will not begin filling, 4E or 4C is more consistent with the symptom. Check the full code and the model manual before acting, since displays and code definitions are not identical across every Samsung washer.
Keeping the washer’s water path clear
Routine care can reduce the chance of a restricted fill, although it cannot prevent every plumbing or component fault. Keep the washer far enough from the wall that its hoses are not compressed, and occasionally inspect the visible length for bends, wear or leaks. Clean user-accessible inlet screens on the schedule stated in the manual, which for the cited Samsung guidance is at least twice a year. Regular checks are most useful when they stay within the manufacturer’s maintenance instructions.
Keep the detergent drawer clean and avoid using more product than the washer requires. If the household water has sediment or the supply has been interrupted for plumbing work, the screens may collect debris more quickly. Do not try to compensate for weak flow by changing internal settings or altering water connections. A persistent supply issue belongs with a qualified plumber or the water provider; a code that remains after normal supply conditions are restored may require an appliance technician.
For a washer showing 4E or 4C, the most useful first distinction is whether water is unavailable at the home, restricted on its way to the appliance, or failing to register inside the machine. Open taps, normal household flow, an unpinched hose and a clean, correctly seated drawer resolve many straightforward cases. When those checks do not change the result, the next step is model-specific professional diagnosis, not electrical testing or internal disassembly.
When a repeated fill warning needs attention
A single alert after a temporary interruption to the water supply may disappear once normal flow returns. A code that reappears across cycles, however, suggests that the washer is still not receiving or detecting water as expected. Note the model number, the displayed code and the point in the cycle when the machine stops. Those details help narrow the diagnosis without requiring the owner to open the appliance.
The practical boundary is clear: check the tap, household supply, visible hose and user-accessible drawer, then stop if the problem remains or a connection needs dismantling. Persistent faults involving valves, sensors, wiring or controls should be handled by a qualified appliance technician. This separates ordinary maintenance from work that requires training and protects both the washer and the person using it.
More error codes: Samsung washing machine errors and error codes: a useful guide.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine6 days agoMan affected by smoke in Valladolid fire
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















