Samsung
LC1 error in a Samsung washing machine: causes and useful solution
The notice indicates a drainage problem: position, blockage, and basic inspection before calling the technician.

Imagen: MrWashingt0n / Pixabay
The LC1 warning on a Samsung washing machine usually appears when the appliance detects that water is not draining correctly. In practice, it most often points to the drain hose: it may be incorrectly positioned, resting too low, installed too high, bent, crushed, partially blocked, or unable to let the water flow out at the expected speed. The washing machine protects itself and stops the cycle before continuing to force the drain pump.
On some Samsung models, a similar drainage problem may appear as LC, while other models can use related codes such as LE or LE1. The exact display depends on the model and its control system, but the practical starting point is the same: inspect the complete route followed by the water, from the washing machine to the household drain.
If the fault persists, the washer may remain blocked for a few minutes while trying to drain. It may also stop between rinsing and spinning, leave water in the drum, or repeat the same warning after being unplugged and switched on again. This is not usually a sign of a serious breakdown at the beginning, but it should not be ignored. Behind the warning there may be a kink in the hose, an outlet that is too high or too low, a connection that is poorly fitted, or residue that is slowing the water flow.
If you have a problem with your washing machine, you can use our free error code finder. From there, you can identify and solve all errors easily and effectively.
What the LC1 warning means on a Samsung washing machine
LC1 does not by itself indicate a complex breakdown. In most cases, the system interprets that the water is not draining at the expected speed and triggers the alert. The machine may detect a slow, irregular, or incomplete evacuation, even when the hose is not completely blocked.
The washing machine does not distinguish between a badly installed outlet and a real obstruction. It only sees that the drain is not responding as it should. A hose that rests on the floor, a hose that is compressed behind the appliance, a drain connection under pressure, or a partial blockage can therefore produce the same warning.
LC1 is a protection alarm rather than a complete diagnosis of the defective part. The washer interrupts the program to avoid continuing with excess water inside the tub. If it continued washing or attempted to spin while the drum still contained water, the result could be a poor wash, wetter clothes, odors, vibrations, imbalance, or additional strain on the pump and other components.
That behavior makes sense because a washing machine works with water, electricity, and internal pressure. A blocked or restricted drain can eventually cause leaks, overflows, or an incomplete wash. The control system therefore stops the program before the drum continues to accumulate water. In many Samsung models, this protection is accompanied by several minutes of draining attempts before the panel stops responding normally.
It is important to read the warning precisely. LC1 is not primarily about the laundry load, the door, or the water supply. It refers to the path that the water follows after washing or rinsing, from inside the machine through the hose and into the household drain. That distinction prevents wasted time checking components that are unrelated to the problem.
Where the drainage problem can be located
The complete drainage route includes more than the flexible hose itself. The water must leave the tub, reach the drain pump, pass through the pump filter and the drain hose, and then enter the household drainage system. A restriction at any of these points can make the appliance behave as though the hose were blocked.
- The drain hose may be bent, twisted, crushed, or resting in an unsuitable position.
- The end of the hose may be too low, too high, poorly secured, or incorrectly inserted into the household drain.
- The hose may contain lint, detergent residue, fabric pieces, small objects, or other debris.
- The drain inlet or the final section of the hose may be partially blocked.
- The washing machine may be pushed too tightly against the wall, forcing the hose into a sharp bend.
- The household drain may be slow, poorly fitted, or unable to accept water at the required rate.
- The drain pump may be worn or unable to move the water with enough force.
- A sensor or the control electronics may be incorrectly interpreting the drainage response.
A total blockage is not necessary to produce LC1. A partial restriction can reduce the flow enough for the washer to decide that drainage is abnormal. This is why the drum may still empty slowly while the code remains active.
Common causes behind the LC1 and LC warnings
Incorrect drain hose position
The drain hose is the main suspect. If its end rests on the floor or sits too low, water can flow back, accumulate, or leave the machine irregularly. A poorly positioned outlet may also create an unstable flow that confuses the electronics.
The opposite problem can occur when the outlet is too high compared with the height recommended by the manufacturer. The pump then has to work against an excessive vertical distance, and the water may not be expelled at the expected rate. Height and position matter as much as cleanliness.
The hose should be directed toward the drainage system and held in a stable position. It should not be sunk into the drain in a way that closes the passage, creates an unnatural suction, or prevents the water from escaping freely. The connection should be secure without being forced.
Kinks, twists, and compression behind the appliance
A sharp fold, an unnecessary twist, or a section crushed by the weight of the washing machine can reduce the internal diameter of the hose. Even if water still passes through, the flow may become too slow for the pump and control system.
Pushing the washing machine too far against the wall is one of the easiest ways to create this problem. The appliance may appear correctly installed from the front while the hose is being compressed at the back. Leaving a few centimeters of clearance and checking the route whenever the machine is moved can prevent a recurring warning.
A hose that is too tight can also become permanently deformed. It may work for a while and then start producing intermittent LC1 warnings as the position of the appliance changes or the hose shifts during the spin cycle.
Partial blockage inside the hose
Lint, detergent residue, small pieces of fabric, objects forgotten in pockets, and dirt carried along by the wash can gradually accumulate inside the hose. These materials do not always create an immediate or complete blockage. Instead, they narrow the passage and reduce the water flow.
Partial clogging is particularly deceptive. The pump may sound as though it is working, and the drum may eventually empty, but the water level drops frustratingly slowly. The cycle becomes longer, the spin stage may not begin, and the washer registers insufficient drainage.
The restriction may be in the middle of the hose, but it may also be located at either end. Small debris often collects where the water loses speed, especially near the connection to the machine, at the final section of the hose, or directly at the drain inlet. Checking only the visible middle section can therefore miss the actual obstruction.
Obstruction or poor installation in the household drain
The problem may not be inside the washing machine at all. A drain that is slow, too high, poorly fitted, or obstructed at the wall connection can imitate the same symptoms as a faulty hose. The appliance cannot distinguish between a twisted hose and an awkward household installation; it only detects that the water is not leaving the circuit at the expected pace.
For this reason, the inspection should include the point where the hose enters the home drainage system. A healthy-looking hose can still produce LC1 if the final outlet is restricted or installed at an unsuitable height.
Excess detergent and residue
Using more detergent than necessary can create excessive foam and residue. These deposits may move toward the pump or drain hose and accelerate the formation of a sticky film. Excess soap is not usually the only cause of an LC1 warning, but it can complicate drainage and contribute to deposits over time.
The mixture of detergent, fibers, and small particles can behave like fine mud in a household pipe. It does not always block the route suddenly. Instead, it progressively narrows the passage until draining becomes sluggish enough for the warning to appear.
Overloading the drum
An excessive load can make water movement more difficult and complicate the distribution of the laundry. At the end of the cycle, the machine has to work under greater resistance, and drainage may become less fluid. An overloaded drum is not the most typical cause of LC1, but it can aggravate a hose or pump problem that was already developing.
If the warning appears only with very large loads but not with a small load, the load size and the distribution of the laundry should be considered alongside the condition of the drain. However, recurring warnings should not be dismissed as a load issue without checking the drainage route.
Symptoms that usually accompany LC1
When drainage fails, the washing machine normally gives clues before or at the same time as the code. Recognizing these signs helps confirm that the issue is in the drainage circuit rather than in washing, filling, or the door-lock system.
- The cycle takes longer than usual.
- The drum still contains water at the end of the program.
- The pump produces a persistent hum or sounds strained for several seconds.
- The machine repeatedly attempts to drain without fully succeeding.
- The water level decreases slowly.
- The cycle stops between rinsing and spinning.
- The spin cycle does not start normally.
- Clothes are wetter than expected because the water has not been removed properly.
- The same warning returns after the appliance is unplugged and switched on again.
- Residue or retained water remains in the tub.
- The pump sound is irregular rather than steady.
In some cases, the fault appears when the machine moves from rinse to spin. If the water has not drained correctly, the spin cycle cannot start normally. The washer protects the drum and stops the rotation to avoid excessive vibrations, imbalance, or motor strain. The result is an incomplete cycle, wetter clothes, and a display that continues to show the same warning.
The sound of the pump is also useful. A normal pump sound combined with very slow water movement suggests a restriction in the hose or household drain. An irregular or unusually weak sound may point toward a pump problem, although only a more complete inspection can confirm that diagnosis.
Sometimes the panel appears to return to normal after the washing machine is unplugged, only for LC1 or LC to appear again during the next wash. That pattern usually points to a mechanical or installation-related cause rather than a passing electronic error. If the same sequence repeats, the problem is still in the drain line or in one of its internal components.
How to inspect the drain hose safely
1. Stop the cycle and disconnect the appliance
Before inspecting the hose, stop the washing machine and unplug it from the electrical outlet. This is especially important if water remains inside the drum or if the rear of the appliance must be accessed. Do not work around water and electrical connections with the appliance still powered.
If the machine has just completed a hot wash, allow the water and surrounding parts to cool before handling them. Keep towels or a shallow container nearby because moving the hose or opening a connection may release retained water.
2. Follow the entire hose route
With the washing machine unplugged, follow the hose from the back of the appliance to the drain point. Look for sharp folds, unnecessary twists, crushed sections, or areas pressed against the wall or the cabinet.
Make sure the washing machine is not resting on the hose. The flexible duct must have enough room to maintain its shape. A hose that is flattened by the appliance may allow a small amount of water through while still producing an LC1 warning during a full drainage phase.
3. Check the height and position of the outlet
Inspect the end of the hose carefully. It should be placed in a free, clean, and stable outlet. It should not rest on the floor, be inserted so deeply that the passage is closed, or be positioned in a way that creates unnatural suction.
Check both extremes of the installation: an outlet that is too low can allow water to flow back or create unstable drainage, while an outlet that is too high can make the pump work harder than intended. Use the installation height recommended for the particular Samsung model when making corrections.
Also check that the connection is not under pressure from the back of the appliance. The washing machine should not push the hose against the wall or force it into a sharp angle when it is returned to its normal position.
4. Inspect the ends and visible sections for dirt
Look for visible lint, detergent residue, fabric pieces, or other debris around the hose ends and drain inlet. If the drain was already becoming slow before the code appeared, the final section of the hose or the household drain may be the most likely location of the restriction.
Cleaning should be careful, patient, and thorough. There is no need to force aggressive tools into the hose, since they can damage the flexible material or push the blockage farther into the system. The aim is to remove the material narrowing the passage without creating a new leak.
5. Check the household drain
Do not limit the inspection to the washing machine. Verify that the wall connection or other household drain can accept water normally. A restriction at the inlet can produce the same symptom as a blocked hose, especially if the washing machine drains normally when the hose is tested through a suitable open container or alternative outlet.
If the household drain is slow or repeatedly backs up, the drainage installation may require attention independently of the washing machine. In that situation, replacing the appliance hose would not solve the underlying problem.
How a partial blockage affects the cycle
An incomplete blockage can be more deceptive than a total blockage. The washing machine continues trying to drain, the pump sound is present, and the water level may fall, but it does so too slowly. The drum can be left half empty, and the program may be prolonged or interrupted as if the appliance were struggling to find a clear route.
The system does not need to see an obvious failure. It only needs to detect insufficient drainage. That is why a small amount of lint or residue can trigger the same code as a more visible obstruction.
In many homes, the restriction is not inside the machine but at the drain inlet or at the final section of the hose. Small debris tends to collect where the flow loses speed. If only the middle of the hose is checked, the area where the obstruction actually formed may be overlooked.
When the water remains in the tub, the machine may refuse to spin. This is not necessarily a separate spin fault. The control system may simply be preventing rotation because the water has not left the drum properly.
What to check if cleaning and repositioning do not work
If the hose is clean, correctly positioned, and free of twists, but the washer still does not drain, the cause may be inside the appliance or in the household installation. At that point, LC1 stops being a simple installation indication and instead requires a more technical diagnosis.
Drain pump
The drain pump may be worn, obstructed, or working with less force than necessary. When this happens, the water does not leave with enough pressure and the system keeps the alert active. At first glance, the hose may look completely normal, but draining remains weak, slow, or erratic.
A pump that hums without moving the water effectively can indicate that it is receiving power but cannot operate normally. An irregular pump sound, repeated attempts to drain, or a warning that returns even with a small load are useful reasons to consider this possibility.
Pump filter and internal obstruction
The pump filter can collect lint, coins, small objects, and other debris that came out of pockets or clothing. Regularly checking and cleaning this filter can help maintain stable drainage, but it should be done according to the instructions for the specific Samsung model.
Before opening any filter access, unplug the appliance and prepare for retained water. Open the filter slowly and use towels or a shallow container to control the flow. Do not reach into moving or powered parts, and do not continue if the procedure requires dismantling components that you cannot safely identify.
Sensor or control electronics
If the hose, drain, pump, and filter are all functioning correctly but the code persists, a sensor may be incorrectly detecting the water level or the drainage response. In other cases, the control electronics may not be interpreting the signal correctly.
These causes are less suitable for a basic household inspection. The fact that the machine displays LC1 does not identify which internal component has failed. A technician can check the condition of the duct, the pump, the sensor response, and the control system in a more reliable way.
Household drainage installation
A poorly fitted wall connection or a drain that cannot evacuate water quickly enough can imitate a defective washer. If the appliance behaves differently depending on where the hose discharges, the home installation deserves particular attention.
The code helps narrow the search, but the installation is what matters. The boundary between a machine problem and a household plumbing problem can be thinner than it seems, especially when the hose itself looks clean and undamaged.
How to reset the Samsung washing machine after the check
The reset does not repair a physical fault, but it can confirm whether the correction worked. After checking the hose, cleaning any visible obstruction, and correcting the outlet position, disconnect the washing machine for a few minutes. This allows the system to reset the internal error reading.
- Stop the washing machine and unplug it from the electrical outlet.
- Check the hose route, its height, its connection, and the household drain.
- Remove any visible lint, residue, or debris using a careful method.
- If appropriate for the model, check and clean the pump filter while controlling any retained water.
- Return the hose to a free, stable position without sharp bends or compression.
- Leave the appliance disconnected for a few minutes.
- Reconnect it and start a suitable test program.
- Observe the pump sound, the speed at which the water level drops, and whether the cycle reaches the spin stage.
If the code disappears and the washing machine drains normally, the issue was probably related to the installation, a one-off clog, or residue in the drainage route. If LC or LC1 returns immediately, the source is probably still present. The reset has only cleared the reading; it has not corrected a pump, sensor, hose, or plumbing fault.
During the test, pay attention to small details. Listen for a persistent hum, check whether water remains in the tub, observe whether the level drops steadily, and look for residue or unusual water movement. These clues help distinguish a minor restriction from a more serious fault in the drainage circuit.
LC, LC1, LE, and LE1: drainage code comparison
Samsung washing machines can use different codes depending on the model and control system. The following table organizes the drainage-related warnings described here. The exact meaning can vary by model, so the appliance manual should be consulted when the display code differs from LC1.
| Code | Description | Possible cause | Useful check or solution | Frequency indicated in the reference chart |
|---|---|---|---|---|
| LC | Check the drain hose | Hose incorrectly positioned or clogged | Correct the hose position and remove the blockage | High |
| LC1 | Check the drain hose | Improperly installed drain or restriction at the outlet | Check the full path and clear the hose | Medium |
| LE | Check the drain hose | Obstruction in the water drainage | Verify that the hose is not crushed or blocked | Medium |
| LE1 | Check the drain hose | Similar drainage problem depending on the model | Inspect the installation and restart the unit | Medium |
This straightforward reading avoids misunderstandings. The message does not call for blindly replacing parts. The first step is to check the water outlet circuit, including the hose, its route, its height, its connection, the drain inlet, and, when appropriate, the pump filter.
In many cases, the practical solution is to return the hose to its correct position and remove the blockage that was preventing the flow. That combination explains why the warning can appear on washing machines that otherwise seem to work normally.
When LC1 is no longer a household issue
Not everything that triggers LC1 can be solved with a quick visual check. If the hose is clean, correctly positioned, and without twists, but the washing machine still does not drain, the origin may be in the drain pump, the pump filter, a sensor, the household drain, or the control electronics themselves.
The difference between a household issue and a real fault is usually seen in persistence. Professional assistance is advisable when:
- The water takes too long to drain after the hose has been corrected.
- The appliance repeats LC or LC1 in several programs.
- Draining is weak even with a small load.
- The drum retains water after several attempts.
- The pump sounds irregular, unusually weak, or strained.
- The code returns immediately after a reset.
- The hose and household drain appear clear but the symptom continues.
- There are signs of leaking water around the appliance.
- The inspection would require dismantling internal components.
At that point, stop using the machine as a test bench. Forcing several cycles in a row without correcting the cause can increase pump wear and complicate a repair that was originally simple. The washer does not break merely because it displays the code; the situation can become more complicated when it is repeatedly forced to work without a clear water outlet.
During a professional inspection, the condition of the drain duct, the pump, the filter, the sensor response, and the drainage system are checked. That inspection is particularly useful when the home drain raises doubts, because a bad outlet point in the wall can imitate the same symptom as a faulty hose.
How to prevent LC1 from returning
Keep the hose route clear
Prevention starts with installation. A hose that is too low, too tight, or crushed behind the cabinet works like a bent straw: water passes through, but it does not flow cleanly. Leave enough space behind the washing machine and avoid sharp bends in the route.
After moving the appliance for cleaning or maintenance, check the hose again before starting another wash. A clean installation greatly reduces the likelihood of the code reappearing.
Check the household drain periodically
Do not assume that every drainage warning originates inside the washing machine. Inspect the wall connection and the final section of the hose from time to time. Detergent, fibers, and small dirt particles can create a sticky film that narrows the water passage without making a noticeable noise.
A drain can appear visually acceptable while becoming increasingly slow. If water drains slowly from the household connection or backs up when the washer empties, the plumbing route needs attention as well.
Use the appropriate amount of detergent
Too much detergent creates foam and residue that can move toward the hose or pump. It is usually not the sole cause of LC1, but it contributes to deposits and makes the drainage route more difficult to maintain.
Using the amount recommended for the detergent, water hardness, program, and load helps reduce buildup. Excess soap behaves like fine mud: it does not necessarily block the route suddenly, but it dirties the path until draining becomes sluggish.
Clean the pump filter according to the model instructions
Cleaning the pump filter from time to time helps prevent lint, coins, small objects, and other debris from restricting the drainage circuit. Follow the instructions for the particular Samsung washing machine, unplug the appliance first, and control any water released during the procedure.
Do not use force or attempt to remove internal parts if the filter is inaccessible or if the procedure is unclear. A damaged filter cover or seal can create a leak and produce a new problem.
Avoid excessive loads
Do not overload the drum. An excessive load makes water movement harder, complicates load distribution, and places more strain on the drainage system at the end of the cycle.
If the warning appears after large loads, reduce the load and ensure that the laundry is distributed normally. However, if the warning continues with smaller loads, the hose, pump, filter, or household drain should still be inspected rather than blaming the load alone.
Leave clearance behind the washing machine
Pushing the washing machine too far against the wall can bend or crush the hose. This small installation detail is one of the easiest ways to create the conditions for a recurring warning. A few centimeters of clearance can prevent the hose from being forced into an unsuitable position.
What to avoid when the warning appears
- Do not continue starting repeated cycles without checking why the water is not leaving.
- Do not pull or bend the hose aggressively to force water through it.
- Do not use aggressive tools that could puncture or deform the flexible hose.
- Do not inspect the rear of the machine while it remains connected to electricity.
- Do not assume that a reset has repaired a physical blockage.
- Do not replace the pump immediately without checking the hose and household drain.
- Do not ignore retained water, leaks, unusual pump sounds, or repeated codes.
- Do not push the appliance against the wall if doing so compresses the drain hose.
The safest approach is to proceed in order: disconnect the washer, inspect the visible drainage route, correct the position, remove accessible residue carefully, check the relevant filter according to the model instructions, reset the appliance, and observe a new cycle. If the message returns, stop testing and arrange a more technical diagnosis.
A small warning with real domestic consequences
The washer does not display LC1 arbitrarily. It does so because the water is not draining as it should, and that has immediate effects on the wash, the clothes, and the appliance itself. A load that ends with retained water takes longer to dry, may develop less fresh odors, and makes the complete cycle less effective.
The problem is therefore not only technical. It interrupts the household routine and can leave clothes wetter than normal. If the machine continues trying to drain without success, the pump and the rest of the drainage circuit may also experience unnecessary wear.
That is why it is worth addressing the warning calmly and methodically. The drain hose is the first place to look, but not the only one if the warning persists. A bad installation, a partial blockage, a slow household drain, or an internal fault can produce the same symptom on the display. Separating one possibility from another saves time, avoids unnecessary replacements, and helps reach a stable solution sooner.
What the warning reveals about everyday washing machine use
The code does not only speak about one specific part; it also reflects how the home drainage system works. A washing machine depends on a clean, orderly water path without obstacles. When something breaks that balance, the appliance translates it into a short but clear message.
The fault usually does not start on the screen. It starts in the flow, in the installation, in the buildup of small oversights, or in a component that is gradually losing performance. A hose can remain unnoticed for years until a small fold, a layer of residue, or a displaced connection reduces the flow enough to trigger the protection system.
It is useful to take LC1 as an early warning rather than an exaggerated alarm. Ignoring it can prolong the problem, leave clothes wetter than normal, create odors, and eventually put additional strain on the pump or drainage circuit. Solving it early avoids incomplete cycles and the wear associated with repeatedly trying to drain water that never fully drains.
Final diagnosis of the LC1 warning
On a Samsung washing machine, LC1 is one of those warnings that seems minor until the drum is left with water and the cycle stops halfway through. Reading it correctly makes the difference between a quick inspection and a misdirected repair.
The most valuable clue is repetition. When the same warning appears over and over, the washing machine is insisting on the same message with almost mechanical precision: the water is not leaving at the proper rate. That repetition helps distinguish a one-time interruption from a persistent restriction, and that difference changes how to act.
The cause is often in a flexible, discreet hose that is easy to overlook. However, that duct is effectively the emergency exit for the water. If it narrows, bends, becomes clogged, or is installed at an unsuitable height, the entire system suffers.
When a Samsung washing machine shows LC1, the practical diagnosis usually begins with three points: position, water flow, and cleanliness. Check the full route, correct the installation, clear accessible obstructions, and reset the appliance. If the code still returns, the problem may involve the pump, filter, household drain, sensor, or control electronics and requires a more methodical inspection.
The clue is in the drain, not in the sound of the error. That is where the sensible solution almost always begins.
More error codes: Samsung washing machine errors and error codes: a useful guide.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine7 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine6 days agoMan affected by smoke in Valladolid fire
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















