Magazine
Can sneakers be put in the dryer: risks and alternatives
Heat can deform them, peel off the sole, and shorten their useful life. These are the safest options for drying them.

Sneakers go into the dryer only at the cost of a real risk: heat can deform the rubber, weaken the adhesives, and alter the fit. In running, canvas, or everyday models, the problem is usually not immediate damage, but silent wear that shortens the footwear’s lifespan and changes how it behaves when walking or running.
The short answer is cautious: yes, some sneakers can be dried in a dryer, but it is not the safest or most recommended method. It depends on the material, the construction of the footwear, the temperature selected, and whether the manufacturer allows it on the label. By contrast, leather, suede, technical membranes, and models with delicate glued or ornamental parts should be kept away from that direct heat.
If you have a problem with your dryer, you can use our free error code finder. From there you can find out and fix all errors easily and effectively.
What heat really does to a pair of sneakers
A dryer does not dry with air alone: it works with temperature, movement, and friction. That combination speeds up drying, but it also punishes the materials. The outsole and midsole, which rely on foams and flexible compounds, can lose shape with repeated heat. The adhesives that join the upper to the base also suffer, and the damage does not need to be visible for an opening in a seam or a toe-cap separation to appear later.
In sports footwear, this point is key. Many sneakers include synthetic layers, breathable mesh, heat-sealed reinforcements, and very precise bonding. High heat and the constant rotation of the dryer can stress those joins and leave the shoe stiffer or warped. Anyone who runs in them usually notices right away: the foot no longer fits the same, the arch changes support, or the toe box loses volume.
There is also a more subtle but very common effect: loss of comfort. Insoles can shrink, laces can dry out, and certain fabrics become rough. The result is not just an aesthetic problem. Deformed sneakers can rub, cause blisters, or throw off your gait, especially in models that require a precise fit.
Which models tolerate the dryer better and which do not
Not all sneakers react the same. Those made of canvas or cotton usually withstand brief drying at low temperature better, as long as the manufacturer does not advise against it and they do not have sensitive embellishments. Even so, caution still applies. A short cycle may be acceptable in an emergency, but it should not become a habit.
At the opposite end are sneakers made of leather, suede, nubuck, waterproof materials, or technical membranes. For those, the dryer is a bad companion. Heat can harden the leather, leave marks on the surface, and damage coatings designed to repel water. In hiking or technical footwear, the punishment is double: both the outer finish and the ventilation or protection that give that construction its value are compromised.
Sneakers with many decorative elements, PVC pieces, metal appliqués, rhinestones, or glued details also deserve caution. The more complex the mix of materials, the greater the risk of warping or breakage. In children’s footwear, for example, the dryer may seem like a quick solution, but it often leaves an unnecessary cost if the model has rigid reinforcements or lightweight soles.
How to reduce damage if there is no other option
There are situations in which the dryer becomes an emergency solution: rain, high humidity, a sports outing the next day, or not enough time to wait for natural drying. In that scenario, the goal is not to make it ideal, but to limit thermal and mechanical impact. The first rule is simple: check the care label. If the manufacturer forbids it, there is no room for improvisation.
Before putting them in, it is wise to remove insoles and laces. Insoles dry better separately, and laces do not need the same treatment as the whole shoe. It also helps to remove mud, sand, or visible dirt, because any abrasive residue inside the drum can make friction worse. If the sneakers are soaked, first gently squeeze them with an absorbent towel.
The next point is temperature. Low heat or cool air are always preferable. When the dryer has a delicate cycle or a cycle specifically for sensitive garments, that is the most sensible range. A short cycle, with frequent checks, protects much more than a long one. Some dryers include a rack or support for footwear; if that option exists, it reduces banging and improves airflow distribution. Even so, monitoring is still important.
There is a practical trick that often works: put some clean, dry towels in with the shoes, without overloading the drum. The towels help cushion impacts and absorb moisture, but the machine should not be packed full because the air needs to circulate. What should not be done is applying high heat to speed up the process. That shortcut usually ends up being costly, especially for relatively new or mid- to high-priced athletic shoes.
Why running shoes deserve more careful treatment
Running shoes are not just any footwear. Their design seeks a balance between cushioning, lightness, and responsiveness. That fine architecture depends on foams, mesh, and adhesives that work together. The dryer can alter precisely what makes that set valuable: shape, flexibility, and stability.
Anyone who goes running knows that a small change in fit is noticeable right away. A stiffer toe box, a collapsed side panel, or a deformed insole changes the feel of support. Over short distances, it may seem like a minor annoyance; on long runs, it becomes a real problem. In addition, repeated heat speeds up the aging of the midsole, which over time loses some of its rebound and consistency.
That is why, even if some brands allow certain dryer use on specific fabrics, the technical guideline is usually different: air drying remains better for preserving the sneaker’s original geometry. In technical footwear, durability depends not only on being clean, but also on the whole structure maintaining the correct tension between all its parts.
Air drying is still the most stable option
Air drying does not mean leaving sneakers lying around in any corner. Ideally, place them in a ventilated, dry spot away from direct sunlight. Strong light can fade materials and dry out components. Indoors, near a draft or a gentle fan, the process is much more even and less aggressive.
Filling them with absorbent paper or newspaper helps draw moisture out from the inside. It should be changed when it gets wet, because saturated paper no longer absorbs water. Insoles should also be dried separately, laid out flat, so they do not retain odor or moisture on the surface that contacts the foot.
This patience pays off. Slow drying preserves the shoe structure and reduces the risk of bad odors, mold, and deformation. It is not the fastest method, but it is the one that best preserves the shape of the toe box, the tension of the vamp, and the life of the adhesives. In practice, it is the difference between drying and caring.
Signs that a sneaker should not have gone into the dryer
Damage does not always show up as an obvious break. Sometimes it appears in small changes: the sole no longer sits flat, the inside feels stiffer, the tongue shifts, or the outer fabric loses symmetry. A seam that opens by a millimeter today can become a crack tomorrow. Whitened marks on synthetic materials and shrinkage in some parts of the upper are also common.
If the footwear starts to smell like overheated glue or hot plastic, it is wise to stop using it and check its condition. That smell usually indicates that some internal part has taken more heat than it should. In white sneakers, heat can also cause uneven yellowing that cannot always be reversed. In black or dark models, the problem is less noticeable, but the structural deterioration is still there.
The most useful test is also the simplest: put them on and walk a few steps. If the fit has changed or a new discomfort appears, something has warped. Sports footwear is meant to support movement, not force the foot to adapt to a shape altered by heat.
Which materials call for an almost absolute ban
There are materials that react badly even to brief exposure. Genuine leather can harden or crack; suede loses its finish and marks easily; EVA foam and other lightweight foams can be affected by excessive heat; and waterproof membranes, so common in outdoor footwear, depend on a technical balance that the dryer easily disrupts.
Mixed combinations are also worth distrusting. Many urban sneakers mix mesh, synthetic material, heat-bonded reinforcement, and decorative pieces. That mosaic of materials does not age at the same pace. When each layer responds differently to heat, the risk of twisting increases. What looks intact on the outside may have a weakened bond inside.
The same is true for children’s shoes. The rush to have them ready for the next day often leads to using the dryer, but it is often a bad deal. Children’s feet also grow quickly, so a small change in size or fit can make a pair that was perfect become uncomfortable. In that case, the dryer does not save as much as it seems.
The right decision depends more on the material than on the rush
The question is not answered with a universal yes or no. It depends on the material, the type of construction, and the program the machine uses. A simple canvas sneaker may tolerate moderate drying better than a running model with technical foams and fine bonding. But even in the most favorable case, the safety margin is small if temperature is overused.
That is why the best way to look at it is not as a standard solution, but as an exceptional resource. When the footwear is inexpensive, heavily worn, and the manufacturer allows it, it can be an acceptable option. When sneakers have sporting, aesthetic, or monetary value, natural drying remains the most sensible path.
In a home with humidity, rain, or little time, the temptation to use the drum is understandable. But the hidden cost usually outweighs the benefit. Sneakers that keep their shape, cushioning, and support last longer and perform better. And in footwear, that balance between comfort and durability is almost everything.
A small habit that extends the life of footwear
Properly drying sneakers is not just a matter of cleanliness. It is also a way to preserve their structure, prevent lingering odors, and slow down wear in each layer. Correct drying keeps alive the fit that made those sneakers comfortable on day one. It seems like a minor detail, but you notice it with every step.
The dryer may seem fast, clean, and convenient, but it is not always the ally it promises to be. With footwear, speed and gentleness rarely go hand in hand. So before pressing the button, it is worth thinking about the material, checking the label, and weighing the true value of the pair. Often, the best care is not the fastest, but the one that leaves intact the shape that the foot gets along with best.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine7 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine7 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine7 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer7 days agoCecotec air fryer E1 error: what to do safely
Magazine7 days agoMan affected by smoke in Valladolid fire
Heat pump6 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine6 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















