Magazine
How to remove the bad smell from the washing machine without damaging it
The causes of the odor, the cleanings that work, and the habits that prevent it from reappearing in the drum.

The bad smell in the washing machine almost never starts in the visible drum. It usually hides in the door seal, the detergent drawer, the filter, or in a thick mix of moisture, soap, and limescale that builds up over time. When the smell is noticeable as soon as you open the door or clings to clean clothes, the problem is no longer just aesthetic: there is built-up residue and bacteria that need a real cleaning.
If you have a problem with your washing machine, you can use our free error code finder. From there you can find out and solve all errors easily and effectively.
What lies behind the smell and why it comes back so quickly
The washing machine works with water, detergent, fabric softener, and fabrics that shed lint, body oils, and invisible dirt. That combination seems harmless, but in reality it leaves a trail that is very favorable to mold and bacteria, especially when short, cold washes and too much soap are repeated. The result is a musty smell that sometimes reminds you of a closed basement, a damp towel, or an unused drain.
The problem is usually not just one cause, but several small habits added together. Always washing at low temperature, closing the door as soon as the cycle ends, leaving wet clothes inside, or using more detergent than necessary creates an internal layer of residue that sticks like varnish. That film, which in some models builds up between the tub and the drum, is hard to see but easy to notice when clothes come out with a sour or stale smell.
The type of water also matters. In areas with hard water, limescale speeds up the buildup of residue and hardens the dirt, so the appliance gradually loses efficiency. It does not take a major breakdown for the smell to appear; often it is enough that the inside never reaches a high enough temperature to remove what is being deposited. That is why a hot maintenance wash remains such a useful and simple measure.
The places where the real problem hides
The door seal is one of the most delicate points in front-loading washing machines. Its folds trap water and small dirt particles, and mold settles easily in that damp corner. At first glance it may look like just a black mark or a dull edge, but in reality it is a source of persistent odor. Drying that area after each use makes a noticeable difference, although it is not enough once residue has already stuck to it.
The detergent drawer also deserves attention. It accumulates traces of liquid detergent, fabric softener, and stagnant water that eventually form a sticky paste. That mixture not only smells bad; it also makes it harder for the product to enter the wash properly. In many homes the drawer is only cleaned on the outside, when the real problem is in its channels and in the back part, where moisture gets trapped for days.
The filter, for its part, works like a trap for lint, coins, threads, and small items forgotten in pockets. If it is not emptied regularly, it can become a source of strong odor and also affect drainage. When the filter accumulates stagnant water, the smell changes and becomes harsher, almost metallic. If you add a dirty hose or a drain with backflow to that, the bad smell can rise through the drum and stay in the whole kitchen.
What to do when the washing machine already smells bad
Effective cleaning starts by removing everything that can retain moisture. The drawer should be taken out if the model allows it and washed with hot water, soap, and a small brush to reach the corners. It is a good idea not to forget the slot it fits into, because a layer of detergent also builds up there and often goes unnoticed. That kind of residue, sticky and dark, is one of the most common sources of recurring odor.
Then it is time to inspect the seal carefully. A damp cloth and a little suitable cleaner are usually enough to remove surface dirt, but if there are black spots or a slippery feel, there may be mold. In that case, you need to work into the folds, lift the gasket carefully, and dry it afterward. You should not leave hidden water in any edge, because retained moisture is exactly the fuel for the problem.
The most decisive step is usually the empty maintenance wash at a high temperature. A long cycle at 60 degrees or more helps remove grease, soap, and microorganisms that cling to internal parts. Some machines have a specific drum-cleaning program; others need a normal cycle without clothes, but with enough heat. The key is not to perfume the inside, but to clear it of residue.
When the smell is very intense, cleaning the filter is no longer optional. You have to empty it with a tray or towel underneath, because retained water usually comes out. Removing lint, bits of paper, or small objects prevents the system from continuing to recycle dirt. If the water that comes out smells sour or the filter is covered with a dark film, the washing machine is warning that it needs a deeper intervention.
In some cases, the source is not the washing machine itself but the plumbing. A drain with backflow, a poorly placed hose, or a partial blockage can send bad smells back into the drum even if the inside is clean. If the appliance drains slowly, makes strange noises when emptying, or leaves clothes too wet, the fault may be in the pump, the pipe, or the main outlet. When it gets to that point, household cleaning is no longer enough.
What works and what is best avoided
Home remedies spread widely because they promise a quick solution, but not all of them are equally useful. Vinegar, for example, is often mentioned as a deodorizer, although its effect may be limited if what is inside is a compact layer of residue or limescale. Baking soda can help in certain cleanings, but it also does not replace a hot maintenance wash or solve a clog in the filter. The important thing is not to confuse fragrance with cleaning.
Bleach, when used without caution, can also be a problem. It is useful for disinfecting certain surfaces, but it should not become an automatic habit inside the drum. Improper use can damage materials, leave harsh smells, or leave unwanted residue if not rinsed well. Instead of improvising mixtures, it is better to follow the manufacturer’s instructions and choose products designed for cleaning washing machines, which are made to dissolve internal dirt without being so harsh on the parts.
Another common mistake is increasing the detergent dose in the hope of getting more cleaning. In reality, when the recommended amount is exceeded, the soap does not always rinse out completely and part of it ends up depositing in the hoses, seal, and drum. That excess forms a kind of cloudy cream that, over time, breaks down and feeds the bad smell. Less foam does not mean less washing; many times it means a healthier interior and better-rinsed laundry.
Habits that keep the drum clean for longer
Prevention matters more than it seems. Leaving the door slightly open after each wash allows the inside to air out and prevents moisture from getting trapped. Doing the same with the detergent drawer, whenever the design allows it, reduces the time water can sit and rot residue. A closed, damp washing machine is a small greenhouse for mold.
It also helps not to leave clothes inside for hours once the cycle has finished. Wet laundry smells quickly and, if it remains in the drum, transfers that moisture to the inside of the appliance. The same happens with very sweaty garments or wet towels, which should not be piled inside the machine while waiting to fill a load. That habit seems practical, but it ends up taking its toll.
The amount of detergent and the type of program matter more than people usually think. Quick, cold washes are useful for lightly soiled clothes, but they should not be the only option for months. A hotter cycle, even once a month, helps remove residue that sticks in internal areas. In many homes, that simple alternation prevents the smell from becoming chronic.
Load size also counts. Overfilling the drum prevents water from circulating properly and clothes from moving freely, which reduces dirt removal. An overloaded washing machine washes worse, rinses worse, and ends up retaining more moisture than is desirable. The balance between capacity and movement is an invisible part of the appliance’s hygiene.
Signs that cleaning is not enough
If the smell persists after cleaning the seal, drawer, filter, and drum, it is worth looking beyond the usual household routine. A washing machine that still smells bad after several maintenance cycles may have a drainage problem, deeper internal buildup, or a worn part. Sometimes the smell only appears in certain phases, such as during draining or spinning, and that points to a mechanical cause.
The warning signs are usually quite clear: water that takes too long to go away, strange noises while pumping, clothes that come out too wet, or dampness in the lower part of the appliance. A persistent smell can also be noticed even when the drum is empty and the door is open. When the smell no longer depends on use, the appliance is asking for inspection.
In the case of second-hand washing machines, older appliances, or machines that have gone a long time without maintenance, dirt may have concentrated in less accessible corners. Sometimes the problem is an internal part that has built up organic residue and needs professional cleaning. Insisting with more soap or more perfumes only masks the symptom for a few hours.
A simple routine that prevents the same problem from coming back
The best scenario is not a perfumed washing machine, but a dry, ventilated, residue-free one. Regular filter cleaning, drying the seal, ventilating the drum, and a monthly hot wash form a more effective combination than any isolated trick. That routine does not require great effort, but it does require consistency. Indoor freshness is built more by habit than by miracle.
It is worth thinking of the washing machine as any space where water and residue mix: if the air is not renewed and the leftovers are not removed, the smell appears. Just as a sink is not left with stagnant water for days, the drum should not remain closed and damp indefinitely. In the end, maintenance is very similar to good ventilation at home: quiet, repeated, and highly effective when done in time.
It is also useful to check the detergent dosage and the condition of the plumbing from time to time. Hard water, overly cold programs, and excessive loading push the appliance toward the same outcome: residue, bacteria, and odor. With a proper cleaning and more moderate habits, the washing machine once again smells like what it should smell like, truly clean, without that heavy note of trapped moisture that betrays neglect.
When the bad smell from the washing machine keeps coming back, the answer is almost never a single action. It is a sum of details: drying, ventilating, cleaning, dosing better, and heating the inside from time to time. That balance protects clothes, extends the life of the appliance, and prevents the smell from settling in again like an unwelcome guest. And that, for an appliance that works every day, is saying a lot.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Magazine6 days agoMan affected by smoke in Valladolid fire
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















