Dishwasher
Samsung dishwasher drain hose error: causes and fixes
Find out why the dishwasher cannot drain, which checks are safe at home and when the fault needs professional attention.

Imagen: padrinan / Pixabay
A drain hose warning on a Samsung dishwasher usually means water is not leaving the machine as expected. A frozen, kinked or obstructed hose is a common cause, but a blocked sink drain or a problem with the drain pump can produce similar symptoms. Start with checks you can make without pulling the appliance out or taking it apart; if the hose looks clear and water still remains, the fault may need a qualified technician.
If you have a problem with your dishwasher, you can use our free error code finder to identify and troubleshoot appliance errors easily.
What the drain hose warning means
The dishwasher must pump used water through its drain hose and into the household plumbing. If water cannot pass through that route at the expected rate, the machine may stop the wash program and show a drain-related warning. The message points to a drainage problem, but it does not prove that the hose itself is damaged or blocked. It describes a symptom in the water outlet path, not a confirmed diagnosis of one part.
Samsung models do not all use identical displays, service procedures or diagnostic messages. A plain-language warning on one model may appear differently on another, and it should not be treated as interchangeable with a numbered code from a different model or brand. Check the manual for the dishwasher’s model number before interpreting a display, particularly if the wording is unclear or appears alongside another indicator.
A slow drain can leave a shallow amount of water in the sump area, while a more serious restriction may leave standing water across the bottom of the tub. A little water in a designed sump area is not necessarily the same as a tub full of water. What matters is whether the machine is failing to clear water during the cycle, whether the warning returns, and whether there are signs of a leak. Persistent water or a repeated warning deserves closer attention than a single interrupted cycle.
Why the hose may stop carrying water
A kink or crushed section is one of the most straightforward causes. The hose can be bent sharply, trapped against a cabinet, or compressed if the dishwasher has been moved or pushed back into a tight opening. Even a partial restriction can slow drainage enough to interrupt a cycle. Look only at sections that are already visible and accessible; do not pull out a built-in dishwasher to reach the hose, because doing so can strain connections or damage flooring and cabinetry.
Cold conditions can also freeze water inside an exposed part of the drain route, especially where a hose passes through an unheated space or sits close to a cold exterior wall. Ice narrows or blocks the passage, so the pump cannot move water through it normally. This is more plausible after a period of unusually low temperatures. Do not use a flame, heat gun or boiling water to thaw the line, and do not force a stiff hose into a new position. Sudden heat and pressure can damage plastic or weaken a connection.
Food particles, grease and other debris can accumulate in accessible filters or the household drain connection. A blockage may also be farther along the sink’s plumbing rather than inside the dishwasher hose. If the sink drains slowly or backs up when the dishwasher runs, that is useful evidence of a shared drainage restriction. The appliance may be functioning normally while its outlet is meeting resistance beyond the cabinet.
Installation can contribute to repeat problems. A hose routed under tension, bent around a sharp edge or left with too little room can become restricted again after the cabinet is disturbed. A drain connection that does not match the dishwasher’s installation requirements may also encourage slow drainage or water returning toward the appliance. Because hose routing and connection height depend on the model and installation, use the product manual rather than guessing at a universal measurement.
Safe checks before arranging service
First, stop the cycle using the controls and note exactly what the display shows. If the appliance has stopped with water inside, avoid repeatedly restarting it; another cycle may not clear a physical obstruction and can add more water. Check the model-specific manual for the meaning of the displayed message and the manufacturer’s recommended reset procedure. A reset can clear a temporary interruption, but it cannot remove ice, debris or a mechanical fault.
Once the machine is stopped, look for an obvious kink, compression or leak along any hose section visible without moving the dishwasher. Also check whether the sink drains at its usual speed and whether water appears around the appliance or beneath the sink. These observations help distinguish a possible household drain issue from a problem that appears limited to the machine. Keep the inspection external and visual; do not disconnect plumbing or open the appliance.
If the owner’s manual identifies a user-accessible filter, follow its instructions for cleaning that filter. Remove only parts the manual explicitly describes as accessible to the owner, and do not reach into an area where you cannot see what you are touching. Wear gloves if handling dirty filter material, and stop if the filter is stuck or access requires tools or force. Cleaning a filter may help when debris is visible there, but it will not resolve a blocked pump or a restriction deeper in the drain route.
If freezing seems likely, allow the area to warm naturally and give the appliance time before trying another cycle. Do not dismantle the hose to bring it indoors, pour hot water into the machine, or apply direct heat to the installation. Those actions can create leaks or damage components, particularly when the hose or its connections are concealed. When the suspected frozen section is inaccessible, let a qualified technician assess it rather than trying to expose it.
What recurring drainage trouble can reveal
A warning that returns after a visible kink has been corrected suggests the cause may be elsewhere. The household drain could be partially blocked, the hose route could be poorly positioned, or debris could be restricting a section that cannot be seen from outside. If the sink and dishwasher share a drain connection, slow sink drainage, gurgling or wastewater backing up during a dishwasher cycle can point toward a plumbing problem. These signs do not identify the exact blockage, but they make the sink drain part of the investigation.
Repeated trouble after the appliance has been pushed into place can indicate that the hose is being squeezed behind the cabinet. The restriction may disappear when the dishwasher is out of position and return once it is installed again. Because moving an integrated unit can strain the water supply, drain line or electrical connection, this is not a safe do-it-yourself test. A technician or qualified installer can check the routing without putting those connections under unnecessary stress.
A damaged hose is another possibility if there are visible cracks, hardened areas, persistent dampness or a history of leaks. The outside of the hose may look intact while an inaccessible section has deteriorated, so an external inspection cannot rule out every defect. Replacing a hose involves access to its connections and can create a leak if it is fitted incorrectly. That work should be left to someone qualified to service the appliance and verify the installation.
There is also a difference between a restriction and a pump that cannot move water effectively. A drain pump may make an unusual hum, run without clearing the tub, or fail to operate as expected, but sounds alone cannot confirm which component has failed. Do not remove panels or put a hand into the pump area. Internal pump checks and electrical diagnosis belong to a qualified appliance technician.
When the issue may be beyond the hose
Water remaining in the tub after a cycle, especially when the accessible filter is clean and the visible hose has no kink, makes a deeper drainage fault more likely. The restriction could be inside the appliance, in a concealed part of the hose, at the household connection or in the pump. A recurring warning is also significant: a one-time interruption can have a temporary cause, while the same failure across several cycles points to a condition that has not been corrected.
Pay attention to leaks, a burning smell, unusual grinding or a pump that repeatedly hums without draining. Stop using the dishwasher if water is escaping or there are signs of electrical damage, and do not touch wet electrical connections. If the power plug is safely accessible without moving the appliance or reaching through water, follow the manual’s instructions for switching the machine off; otherwise, leave it alone and arrange qualified service. Never open the dishwasher or handle wiring to investigate a drainage warning.
A technician should take over when the checks require removing the dishwasher, disconnecting a hose, accessing the pump or opening a panel. The same applies if the warning persists after safe, owner-approved checks, if water repeatedly remains in the tub, or if the machine leaks. A professional can inspect the full drain path and determine whether the cause is an installation restriction, a damaged hose, a pump fault or another internal issue without relying on guesswork.
Preventing the warning from returning
Keep the dishwasher’s visible drain hose free from sharp bends and pressure where it can be checked without moving the appliance. If the unit is installed or repositioned, the hose should not be stretched, pinched behind the cabinet or forced around a sharp edge. The correct routing depends on the installation and model, so a qualified installer should follow Samsung’s instructions rather than relying on a generic rule about hose height or length.
Regularly clean only the user-accessible filter and other areas identified in the manual. Scrape large food scraps from dishes before loading, while avoiding the idea that a dishwasher needs perfectly prewashed dishes. Grease and debris can build up in a drain over time, but aggressive cleaning tools or chemicals may damage parts or create a plumbing problem. Use the cleaning method specified for the model and avoid forcing objects into the drain opening.
In a cold room or cabinet area, pay attention to signs that the drain route may be exposed to freezing temperatures. If the home has had freezing conditions and the appliance stops draining, let the area warm gradually rather than applying direct heat. For recurring seasonal problems, an installer can assess whether the hose route or surrounding conditions need attention. Prevention is most effective when it addresses the actual installation, not just the visible symptom.
Finally, note when the warning appears, whether the tub contains standing water, whether the sink is draining normally, and whether the problem began after the dishwasher was moved or the weather turned cold. Those details help narrow the cause without dismantling anything. A clear record of the symptoms can make a professional diagnosis more efficient, especially when the message appears intermittently or the machine drains on some cycles but not others.
Finding the cause without risking further damage
When a Samsung dishwasher stops draining, the first suspects are a kinked, frozen or obstructed hose, but the sink drain, installation route and pump can produce similar symptoms. A careful visual check, attention to the filter instructions and observation of the household drain are reasonable starting points. The displayed message alone cannot identify which part has failed, and the exact interpretation should be checked against the manual for the model.
Do not remove the hose, pull out a built-in unit or open the appliance to test the pump. If safe, accessible checks do not restore normal drainage, or if the warning returns, water remains in the tub or a leak appears, stop troubleshooting and arrange assessment by a qualified technician. Keeping the inspection within the owner’s manual protects both the appliance and the home from avoidable damage.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine7 days agoSaeco coffee machine error 1: what it means and what to do
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Coffee machine7 days agoJura coffee machine error 8: what to do and repair costs
Coffee machine7 days agoJura coffee machine error 5: what it means and what to do
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Magazine6 days agoMan affected by smoke in Valladolid fire





















