Electrolux
Electrolux washer E35 error: what it means and what to do
Find out why an Electrolux washer may show E35, which checks are safe at home and when the fault needs professional attention.

An E35 alert on an Electrolux washing machine generally indicates that the appliance has detected an unusually high water level, or that foam is interfering with its level readings. The washer may stop mid-cycle, keep filling, or fail to drain as expected. The precise meaning can vary by model, but the fault commonly involves the water-level sensing system rather than a simple program glitch.
If you have a problem with your washing machine, you can use our free error code finder to identify and troubleshoot error codes.
What the E35 alert means
Washing machines monitor the amount of water in the tub so they can fill, wash and drain in the right sequence. In many Electrolux models, E35 appears when the control system reads a level that is too high or receives an abnormal signal from the parts that measure that level. It is a warning that the machine cannot confidently manage the water in the drum, not a diagnosis of one specific failed component.
The display alone cannot tell whether the tub is genuinely overfilled or the sensor system is reporting the wrong level. Water may be visibly above its usual level, but the code can also appear when the pressure-sensing path is obstructed, a sensor is faulty, or excess suds affect the reading. The same code should not be assumed to mean the same fault on every model, so the user manual and model number matter when confirming the interpretation.
If the washer is still taking in water, has water near the door seal, or is leaking onto the floor, stop the cycle using the normal controls if it is safe to do so. Do not open the door against water pressure or reach toward a wet plug, socket or appliance connection. If the controls cannot stop the filling, water is escaping, or the surrounding area is wet, keep clear and arrange help from a qualified appliance technician.
Why a washing machine can report too much water
A true overfill can occur if the water inlet valve fails to close properly. That valve controls the flow into the washer; if it remains open when the appliance is not asking for water, the tub may continue filling. A valve fault is only one possibility, though, and it cannot be confirmed from the code without testing by someone qualified to work on the appliance.
Another common area involved in this fault is the pressure or water-level sensing system. A sensor detects changes associated with the water level and passes that information to the control board. A blocked, damaged or disconnected pressure tube, residue in the sensing path, or a failed sensor can cause an inaccurate reading. These parts are usually inside the machine, so checking or cleaning them requires opening the casing and is not a safe routine user check.
Excess detergent or detergent that is not intended for a front-loading high-efficiency washer can produce more foam than the machine can handle. Suds can linger, affect the water-level reading and interfere with draining. If the drum is visibly full of bubbles, detergent is a plausible contributor, but persistent E35 warnings should not be attributed to soap alone; a sensor, valve or drainage fault may still be present.
Drainage trouble can also complicate the picture. A clogged accessible filter or a blocked household drain may leave water in the tub longer than expected, while a problem deeper in the pump or internal hoses needs a technician. Electrical connections and the control board are further possibilities, but they should be investigated only after simpler explanations have been ruled out. Replacing a control board based only on an E35 display would be premature.
Safe checks to make before arranging service
Start by noting what the washer was doing when the code appeared: filling, washing, rinsing or draining. Check through the door whether there is an unusually high water level, a large amount of foam, or no visible water despite the warning. These observations do not identify the failed part, but they help describe the symptom accurately and can guide the next diagnosis.
If the drum contains a lot of suds and the machine is not leaking or continuing to fill, allow the cycle to stop and consult the model manual for the appropriate rinse or drain option. Use the washer’s normal controls only; do not force the door or dismantle the appliance to remove water. A further rinse may clear residual foam, but it will not repair a faulty sensor or valve if the alert returns.
Review the detergent used and the amount added. Use detergent suitable for the washer and follow its dosing instructions, taking water hardness and load size into account. Clean any detergent drawer or other user-accessible area according to the manual, and check that the drawer is not packed with residue. Reducing excess suds can resolve a foam-related reading, but repeated errors after detergent use has been corrected point to a deeper issue.
When the washer is not actively filling and there is no water escaping, you can check that the visible drain hose is not obviously crushed or sharply kinked and that the household drain opening is not obstructed. Do not disconnect hoses, loosen fittings or attempt to clear a pressurized water line. If the appliance manual identifies a user-accessible drain filter, follow that model’s instructions and do not open it while the drum is full or water may spill into an unsafe area.
Some models have a reset procedure described in the owner’s manual. A normal power reset may clear a temporary control interruption, but it does not correct a mechanical fault. Do not repeatedly restart a washer that continues to fill, shows E35 again, or has water leaking from it. A recurring warning is a reason to stop using the machine until it has been assessed, rather than a prompt to keep trying cycles.
What not to inspect or repair yourself
The pressure switch, pressure hose, inlet valve, pump wiring and control board are not simple external checks. Inspecting their connections or testing electrical continuity involves access to internal components and, in some cases, electrical measurements. The earlier advice to open the appliance, test parts with a multimeter or clean an internal pressure tube is not appropriate as a general homeowner procedure. Leave internal diagnosis and component replacement to a qualified appliance technician.
Do not remove panels, probe wiring, bridge connectors, or try to force an inlet valve closed. Never work on the washer while it is connected to power, and do not handle plugs or sockets where the floor or your hands are wet. If there is standing water near an electrical connection, keep away and seek qualified help rather than attempting to disconnect the machine yourself.
Water removal also needs care. Opening a pump filter or disconnecting a drain hose when the tub is full can release a large amount of water quickly. Do not improvise a drain procedure or open a component that the manual does not identify as user-accessible. If the washer cannot drain through its normal program, ask a technician to manage the water and inspect the drainage system safely.
Stop using the washer and arrange a professional assessment if it keeps filling after the cycle has stopped, repeatedly displays E35, leaks, makes an unusual pump noise, or leaves water in the drum. The same applies if a basic check reveals damage to a hose or if the error returns despite correcting excess detergent. Persistent overfilling can cause water damage, so the appliance should not be left running unattended while the cause is unknown.
How a technician narrows down the cause
A technician will first confirm the exact washer model and check the manufacturer’s fault information for that model. The visible code is a starting point, not proof that a particular sensor or valve must be replaced. The technician can compare the displayed fault with the water level, the washer’s behavior during filling and draining, and the signals reported by the level-sensing system.
Depending on the findings, the inspection may include the inlet valve, pressure sensor and associated tubing, drainage path, wiring connections and control board. These checks require access inside the appliance and should be performed by someone trained to work safely around electrical and water systems. The likely repair depends on which part or condition is actually causing the incorrect level reading.
There is no reliable repair price that can be inferred from E35 alone. The final cost, where applicable, depends on the failed component, the washer model, parts availability and local labor rates. A blocked user-accessible filter or excess foam may require no replacement part, while a failed valve, sensor or control board can involve a more involved repair. Diagnosis should come before any decision to replace components.
Before arranging service, write down the model number and describe whether the washer was filling, draining or producing heavy foam when the alert appeared. Mention any visible leak and whether the error returned after a normal restart or rinse. Clear symptoms are more useful than guessing at a failed part, and they help avoid unnecessary replacement work.
Washer-dryers and other Electrolux appliances
On an Electrolux washer-dryer, the meaning of a code can depend on the precise model and the cycle in use. A washer-dryer may share some water-level components with a washing machine, but drying and condensation systems introduce other parts and operating conditions. Do not apply an interpretation from a separate dryer or washer-dryer model without checking its manual.
The same caution applies across appliance brands and product families. An E35 code on another manufacturer’s machine may indicate something entirely different, and even Electrolux documentation can vary by model. Use the appliance’s model-specific manual as the reference; if its description differs from the general water-level explanation, follow the model guidance and report the exact code to a qualified technician.
If the alert appeared during a wash cycle on a combined appliance and the drum contains excess water or foam, the safe initial observations are much like those for a washer: note the water level, avoid forcing the door, and use only the controls and user-accessible checks described in the manual. Internal dryer, condensation or electrical components should not be opened or handled at home.
When the alert keeps returning
A single E35 incident alongside obvious excess suds may clear after the foam has gone and detergent dosing has been corrected. If the code returns on a later cycle, appears with ordinary detergent use, or occurs while the washer continues to fill, that pattern makes a persistent fault more likely. Repeated resets can hide the symptom temporarily without addressing its cause.
The useful distinction is whether the machine has a visible, correctable condition, such as excess foam, or whether it cannot reliably control or measure water. A user can observe the first clues and make safe checks around accessible areas; internal pressure sensing, valve operation, wiring and board diagnosis belong to a technician. That boundary helps protect both the household and the appliance.
E35 is best treated as a water-level warning whose exact cause depends on the Electrolux model and the washer’s behavior. Check for foam and obvious external drainage issues only when it is safe, use the manual for any user-accessible maintenance, and stop the appliance if it overfills, leaks or repeats the alert. Once those simple explanations are ruled out, professional diagnosis is the sensible next step—not trial-and-error part replacement.
More error codes: Electrolux washing machine error codes: complete guide.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine7 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine6 days agoMan affected by smoke in Valladolid fire
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















