Washing machine
Zanussi washer E71 error: temperature sensor fault and what to do
A temperature-sensor fault can interrupt a wash. Understand the likely cause, safe checks and when a technician is needed.

E71 on a Zanussi washer indicates that the control system is receiving an invalid signal from the wash-water temperature sensor, usually an NTC thermistor. The sensor or its wiring may be faulty, but the code alone does not identify which part has failed. A brief reset is a safe first check; if E71 returns, the machine needs a proper diagnosis rather than repeated attempts to run a heated wash.
If you have a problem with your washing machine, you can use our free error code finder. There, you can identify and troubleshoot errors easily and effectively.
What E71 means on a Zanussi washer
The E71 code is associated with the wash-temperature NTC sensor. NTC stands for negative temperature coefficient: as the water temperature rises, the sensor’s electrical resistance falls. The washer’s control system uses that changing signal to estimate the temperature and manage the heating stage of a programme.
If the reading is outside the range the electronics expect, the machine may pause or stop the cycle and show E71. That does not necessarily mean the water itself is too hot or too cold. It means the washer cannot reliably interpret the sensor signal, which can result from a failed sensor, a problem with its connection or wiring, or another fault affecting the measurement.
The code narrows down the area to investigate, but it is not a confirmed parts diagnosis. Error definitions can differ across Zanussi models and product generations, so the user manual and the full model number matter. If the code appears alongside flashing lights or beeps, record the display and the pattern before resetting the appliance; those details may help distinguish one model’s diagnostic signals from another’s.
Why a temperature sensor fault stops the cycle
During a wash, the control system needs a dependable temperature reading before it can regulate water heating. If that reading is missing, unstable or implausible, the machine may not be able to control the heating stage as intended. Stopping the programme is a protective response: continuing without a trustworthy measurement could affect the wash and the appliance’s operation.
An NTC thermistor can deteriorate over time, but the sensor is only one possibility. A loose or damaged connection in the sensor circuit can produce a similar signal, and the control system may report the same code for different underlying causes. That is why replacing a sensor based only on the display code can be a guess rather than a repair.
Other symptoms can provide context without proving the cause. The cycle might stop when it reaches the heating stage, take longer than usual, or end before the selected programme is complete. A cold-feeling door or laundry is not a reliable test by itself: many programmes use relatively low temperatures, and the washer’s glass and water may not feel warm even when the cycle is operating normally.
Safe checks you can make at home
Start by noting the complete code and the point in the programme when it appears. If the machine is still running, follow its normal controls to stop or cancel the cycle; do not force the door. Wait for the lock to release and for the drum to stop before handling laundry. If water remains inside or the door stays locked, use the model’s manual for the intended user-level procedure rather than trying to override the lock.
A one-time power reset may clear a temporary control glitch. Switch the washer off, then disconnect it from the power supply only if the plug and outlet are dry, accessible and safe to reach. Leave it disconnected for a few minutes, reconnect it and check whether the code has cleared. Do not touch a plug or outlet with wet hands, or if there is water around the appliance. In that situation, leave the area and get appropriate help.
If the code disappears, you can observe whether the washer returns to normal during a suitable programme, staying nearby and following the manual. Do not repeatedly run hot or heated cycles as a way to test a fault. If E71 comes back, or the programme stops again, stop using heated programmes and arrange for the appliance to be assessed. A reset can restart the control system, but it cannot repair a damaged sensor or wiring.
Keep checks to visible, accessible areas. Make sure the door closes normally and that there is no obvious water leak, burning smell or unusual noise. Do not remove panels, reach inside the cabinet, handle internal wiring or try to measure the sensor. Internal electrical diagnosis belongs to a qualified appliance technician, particularly because the washer contains mains-powered components and may retain water after a cycle stops.
Should you run a heating programme?
Some general troubleshooting advice suggests running a programme that heats water to see whether the washer completes it. That is not a suitable repeated test when E71 remains on the display: the temperature signal is precisely what the appliance may be unable to read correctly. Starting several heated cycles can leave the same fault unresolved and may make it harder to tell when the problem began.
If a single reset clears the code and the appliance behaves normally, a normal programme can provide useful observation, but there is no need to deliberately select the hottest setting. Stop the cycle if E71 returns, the washer behaves abnormally or you notice a leak, unusual smell or sound. Do not continue using a programme that repeatedly stops with the same sensor code.
The distinction is simple: observing normal operation after a reset is reasonable; trying to force the machine through repeated heating tests is not. The sensor circuit should be checked by a technician if the fault persists. That inspection can establish whether the thermistor itself, its connections or another part of the control system is responsible.
When a technician should take over
Professional diagnosis is appropriate when E71 returns after the reset, appears as soon as a programme starts, or repeatedly interrupts the heating stage. It is also time to stop home troubleshooting if the washer will not complete a cycle, displays additional fault codes, leaks, or shows signs of electrical damage. Unplugging the appliance is not a substitute for diagnosis when the underlying fault continues.
A technician can inspect the sensor circuit and verify whether the thermistor’s readings are plausible for the appliance. The assessment may include checking the sensor, its wiring and connections, and the relevant control components. Those checks involve opening the washer and working near electrical parts, so they are not suitable for an untrained user. Do not attempt internal testing or replacement yourself.
There is no dependable repair price or duration that can be inferred from E71 alone. The final work depends on the model and on what testing finds; a sensor fault and a wiring or control fault are not the same repair. The model number, the code, when it appears and whether a reset changed anything are useful details to have ready when arranging an independent, qualified assessment.
Related Zanussi codes and model differences
Other codes may appear in Zanussi washer code guides alongside E71, but their presence in a related-code list does not mean they share the same cause. The descriptions below are general associations reported for Zanussi and related product families, not a substitute for the manual for a specific model. Use the complete code and appliance model to interpret any display accurately.
| Code | Description | Possible area or cause |
|---|---|---|
| E60 | Heating-system fault family | A problem affecting water heating; the exact cause varies by model. |
| E61 | Water heating may be too slow | Heating performance or the temperature-sensing circuit may need assessment. |
| E62 | Water temperature may be above the expected range | A temperature-control or sensing issue may be involved. |
| E66 | May relate to the heater relay | Control of the heating circuit; model-specific diagnosis is required. |
| E74 | May relate to a wash-temperature sensor reading or position | Temperature sensing; the exact interpretation depends on the appliance. |
| E90 | May indicate a configuration or communication fault | Control-system communication or configuration; confirm against the manual. |
| EF0 | May be associated with excess foam or a water-leak condition | Possible oversudsing or water detection, depending on the model. |
| EF1 | May be associated with a drainage problem | A blocked or restricted drain path may be involved; model details matter. |
These related codes are not interchangeable, and a code from one product family should not be applied automatically to another. For example, E60-series codes are commonly associated with heating, but only the appliance’s own diagnostic information can establish the exact meaning. If a different code appears after E71, record each one rather than assuming the second display confirms a particular part has failed.
What to note before seeking a diagnosis
A short, accurate account is more useful than repeated resets. Write down whether E71 appears immediately or after the washer has been running, whether the drum contains water, and whether the programme stopped at a particular stage. Note any flashing indicators and whether the code returned after power was restored. These observations help describe the fault without requiring you to open or test the appliance.
Find the model identification information in the location specified by the user manual, often on the appliance’s rating label. Do not move a heavy washer or remove a panel to find it. Different models can use different diagnostic details, so the product number can be as important as the E71 display when confirming what the code means.
If the washer has stopped with water inside, do not force the door or dismantle the pump area. Follow only the manual’s consumer instructions for that model, and stop if the procedure involves tools, internal parts or an uncertain risk of water release. A persistent E71 calls for diagnosis of the temperature-sensing circuit, not trial-and-error repairs.
A recurring E71 needs more than a reset
A single restart can rule out a temporary control interruption, but a returning E71 points to a continuing problem in the wash-temperature sensing system. The likely area is the NTC sensor or its circuit, yet the code does not establish which component is at fault. A careful diagnosis prevents unnecessary part replacement and helps ensure the washer can control heating correctly.
Keep any checks external and straightforward, avoid repeated heated cycles while the fault persists, and leave internal electrical work to a qualified technician. The safest interpretation is also the most accurate one: E71 identifies a temperature-signal problem, while testing determines its actual cause.
More error codes: Common Zanussi washer error codes and what they mean.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoMan affected by smoke in Valladolid fire
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Magazine4 days agoENISA warns home appliances could be the next cyberattack target
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions





















