Samsung
DDC error on Samsung washing machine: what it means and how to fix it
The AddWash door can stop the cycle if it is not properly closed. Here’s how to identify the cause and fix it easily.

Imagen: geralt / Pixabay
The DDC warning on a Samsung washing machine usually appears when the AddWash door or Add Door has not been securely closed, or when the system detects an opening at an unauthorized moment. The machine interrupts the cycle by design: it will not proceed unless it receives the exact confirmation that this auxiliary door is properly seated.
In practice, the problem is almost always solved without taking anything apart. A firm close, correcting a trapped item of clothing, or a quick reset is often enough. Only when the message repeats over and over, even with the door apparently properly fitted, do signs of latch wear, an erratic closing sensor, or a fault in the locking assembly start to matter.
If you have a problem with your washing machine, you can use our free error code finder. From there you can find out and fix all errors easily and effectively.
What the DDC code is actually indicating
DDC does not on its own describe a complex breakdown; it warns that the Add Door is not in the position the electronics expect. On Samsung models with that additional flap, the washing machine protects itself before allowing the cycle to continue, because it needs to know for certain that the small door is sealed and that there is no risk of accidental opening, leakage, or interruption of the wash.
The idea is simple, even if the mechanism is not. AddWash lets you add a garment halfway through the cycle without opening the main door completely, but that small access also requires very precise verification. If the panel does not receive the correct closing signal, it interprets that the flap is still open or poorly secured and displays DDC to stop operation.
That control is like a lock with double confirmation. From the outside, it may look as though the door is already in place, but for the washing machine that is not enough: it has to detect the exact fit. When the signal fails, the display is not warning of serious damage, but of an incomplete safety condition that prevents normal operation.
| Code | Description | Cause | Usual response |
|---|---|---|---|
| DDC | Error in the Add Door | The AddWash door was opened without following the intended sequence or was not closed properly | Close the flap correctly and resume the cycle with Start/Pause |
| ddC | Variation of the same warning | The washing machine is not receiving the correct closing confirmation on the auxiliary door | Check the fit, close it again, and restart |
| dC3 | Locking or unlocking of the Add Wash | The system cannot move or confirm the position of the auxiliary door | Turn off the washing machine, turn it back on, and check the closure |
| dE3 | Fault related to Add Wash | Incorrect response from the flap locking mechanism | Restart the cycle and check whether the warning persists |
Why it appears in the middle of a wash or just when resuming
The time it appears gives many clues. If the warning shows up right after opening the Add Door to add clothes, the most likely explanation is that the sequence was not completed properly. Samsung requires a specific combination of action and confirmation: first open when the system allows it, then close decisively, and finally press Start/Pause so the washing machine can continue. If that order is broken, the panel blocks progress.
It can also be triggered by a very small physical interference. A sleeve, a corner of a garment, a thick seam, or even a bit of lint can prevent the door from seating fully. From the outside the closure seems correct, but the latch does not quite lock with the precision the system needs. That kind of obstacle is as subtle as it is effective: a millimeter is enough for the washing machine to become cautious.
In some cases the trigger is not the clothing, but repeated use. Moisture, detergent residue, and daily movement leave an almost invisible film around the edge of the door. Over time, that dirt alters the fit and makes the closing readout more sensitive. It is usually not dramatic, but enough for the code to appear again and again.
What to check before assuming there is a fault
The first check is visual, but it should be done calmly. It is worth opening the door, looking around the AddWash perimeter, and checking for trapped clothing, hardened dirt, or debris in the seal that could prevent a clean close. A dry cloth helps remove soap residue or lint built up on the edge, which often acts as a small mechanical stop.
Then the flap should be closed firmly, without slamming. The click matters because it indicates that the latch has moved into position. If the door is only half-closed or the closure feels loose, the system may understand that the fit is not secure. At that point, forcing it does not help; it only increases the risk of misalignment or further wear on the lock.
It is also worth checking whether the washing machine is properly level. A machine that sits unevenly can alter the pressure on the door and make the closure change slightly from one cycle to another. It seems like a minor detail, but in such sensitive systems any tilt can change the reading the control board receives.
How to recover the cycle without making the lock worse
When the warning is occasional, an electrical reset is often useful. Unplugging the washing machine for about five minutes allows the electronics to discharge and clear a locked state that sometimes remains stored after an unexpected opening or a brief interruption. It does not repair a damaged part, but it does clear transient errors that can get stuck in the panel.
After the reset, the correct sequence becomes decisive again. If the flap was opened to add laundry, insert the item, close the Add Door firmly, and press and hold Start/Pause so the system resumes washing. That order matters as much as the physical closure, because the washing machine is not only waiting for a closed door, but for a logical confirmation that the user has finished вмешательство.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoMan affected by smoke in Valladolid fire
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Air fryer6 days agoE3 error on a Cecotec air fryer: what to do and what to avoid
Magazine4 days agoENISA warns home appliances could be the next cyberattack target





















