Bosch
Bosch dishwasher error codes: meanings and safe checks
Understand Bosch fault messages, safe first checks and the signs that call for professional diagnosis.

A Bosch dishwasher code can point to anything from a dirty filter to a leak-protection alarm or an internal heating fault. The exact meaning depends on the model and generation, so treat the display as a useful clue rather than a universal diagnosis. Codes such as E15, E22, E24 and E25 commonly relate to water in the base, a blocked filter or a drainage problem; persistent heating, pump or control faults usually need professional attention. Check the model-specific manual before acting on any code.
If you have a problem with your dishwasher, you can use our free error code search tool. There you can find out what the errors mean and how to resolve them easily and effectively.
Why the same Bosch code can mean different things
Bosch has produced many dishwasher platforms, and the code definitions can vary by model, control system and market. A number shown on one appliance is not automatically interchangeable with the same number on another. Older references may describe a fault differently from current model-specific guidance, particularly for electronic, heating and water-circulation problems. The appliance’s full model number is the best way to identify the right code definition.
This matters because a code does not always identify a single failed part. A drainage alert, for example, may be triggered by a clogged filter, a blocked pump area, a loose pump cover or a problem farther along the drain path. The display reports what the dishwasher has detected; it does not necessarily reveal the root cause. A safe visual check can sometimes resolve a simple blockage, but a code that returns after basic cleaning needs diagnosis rather than repeated resets.
Some older summaries also associate E02 with a temperature sensor and E03 with a failure to fill, while Bosch code information for other model ranges describes E02 and E03 as control-board relay faults. Older references connect E20 with a circulation pump and E28 with a turbidity sensor, but these descriptions should not be applied to every model. Where descriptions conflict, use the manual for the exact appliance instead of guessing from the code alone.
Common Bosch dishwasher codes and what they indicate
The codes below bring together commonly reported Bosch alerts and the meanings available in the reference material. The wording is intentionally cautious where model differences or inconsistent descriptions matter. A code associated with a part inside the machine does not mean that part should be opened, tested or replaced by the owner. Internal electrical, heating and pump repairs belong with a qualified appliance technician.
| Code | Description | Likely cause or context | Safe first check |
|---|---|---|---|
| E01 | Heat-pump motor circuit or heating-related fault | Control-board circuit, heat-pump system or a model-specific heating issue | Stop and consult the model manual; arrange service if it returns |
| E02 | Control-board relay fault on some ranges; temperature-sensor fault in some older references | Meaning depends on model generation | Confirm the model-specific definition |
| E03 | Control-board relay fault on some ranges; fill problem in some older references | Meaning depends on model generation | Check the manual and visible water supply only if the code definition supports it |
| E04 | Heater electronics fault detected during self-test | Internal heater electronics | No internal checks; professional diagnosis is appropriate |
| E05 | Wash-arm diverter circuit fault | Diverter control circuit or related component | Check that dishes are not visibly obstructing a spray arm |
| E06 | Door-sensor circuit fault | Door sensing or control circuitry | Close the door firmly and check for visible obstructions at the seal |
| E07 | Zeolite or CrystalDry fan motor fault | Drying-system fan on equipped models | Professional diagnosis; this feature is not present on every model |
| E09 | Heat-pump internal heater fault | Heating system or its internal control | Stop troubleshooting beyond a model-manual check |
| E10 | Zeolite chamber heater fault | CrystalDry heating system on equipped models | Professional diagnosis |
| E12 | Limescale detected in the heat-pump system | Mineral buildup, more likely in hard-water areas | Use a dishwasher descaler as directed in the manual |
| E14 | Flow-meter or water-filling-system fault | Water-flow measurement or filling system | Check that the accessible supply is on and the external hose is not kinked |
| E15 | Leak protection activated after water is detected in the base | Water has reached the dishwasher’s base tray | Stop the cycle and close the accessible water shutoff if safe |
| E16 | Water-inlet or filling-system problem | Water may not be entering as expected | Check the external inlet hose for visible kinks or damage |
| E17 | Water-flow or water-level problem on listed model ranges | Fill level or flow is outside the expected range | Check the accessible supply; do not dismantle the inlet system |
| E18 | Water-flow problem | Insufficient or irregular water entering the appliance | Check the supply tap and visible hose condition |
| E19 | Detergent-dispenser solenoid circuit fault | Internal dispenser control | Make sure the dispenser is not blocked by dishes; service if persistent |
| E20 | Heating or circulation-related fault in some references | Descriptions vary by model and source | Confirm the definition in the model manual |
| E21 | Heat pump blocked | Internal pump or circulation system | Do not open the appliance; arrange diagnosis if it persists |
| E22 | Dishwasher filter blocked | Food debris restricting drainage or circulation | Clean the removable filter following the manual |
| E23 | Drain-pump fault | Blocked, damaged or malfunctioning drain pump | Clean the accessible filter; leave pump work to a technician |
| E24 | Drainage problem | Blocked filter or drain path, among other possible causes | Check the filter and visible drain-hose routing |
| E25 | Blocked drain pump or loose or missing pump cover | Debris or a pump-cover issue in the accessible sump area | Follow the model manual for user-accessible cleaning only |
| E27 | Low supply voltage detected | Incoming household power problem | Do not inspect wiring; contact a qualified electrician if it recurs |
| E28 | Turbidity-sensor fault in some older references | Model-specific sensor or sensing-system issue | Verify the code in the appliance manual |
The table includes code descriptions that appear in the supplied references, but it is not a substitute for the manual tied to a specific model. In particular, E01, E02, E03 and E20 are described differently across model ranges and sources. A model number, usually printed on the appliance rating plate, lets an owner match the display to the correct documentation. Do not choose a repair based only on a code list that does not identify your model.
Water-fill alerts point to the supply path
Codes E14, E16, E17 and E18 are associated with water-flow measurement or filling on the Bosch ranges described in the references. The machine may not be receiving enough water, may detect an unexpected flow or may be unable to measure the fill correctly. A closed supply tap or a visibly kinked inlet hose can be checked without opening the dishwasher. Make sure the tap is accessible and fully open, and look along the exposed hose for a sharp bend or damage. Do not disconnect pressurized water lines or dismantle the inlet valve.
If the tap is on and the hose appears undamaged but the warning remains, the cause may involve the flow meter, inlet system or internal sensing. Those components are not safe user-service points. The reference material gives a flow rate of 10 liters per minute for one troubleshooting context, but that figure should not be treated as a universal test or a reason to modify plumbing. Persistent fill codes, unusual filling behavior or visible leakage warrant assessment by a qualified technician.
E15 deserves particular care because it indicates that the leak-protection system has detected water in the base of the dishwasher. This is not the same as a simple no-fill warning, and the appliance may stop operating to limit further leakage. End the cycle if possible, avoid running it again and close the nearby water shutoff if it can be done safely. Do not tilt the dishwasher or remove panels to drain its base. Finding the source of an internal leak requires access and testing that should be left to a technician.
Drain codes often begin with a clogged filter
E22 points to a blocked filter, while E24 and E25 are commonly associated with drainage trouble. E23 is identified in the supplied Bosch information as a drain-pump issue. These alerts can leave standing water at the bottom of the tub, cause a cycle to stop before completion or produce a gurgling sound as the machine tries to drain. Food scraps, labels and other debris can collect around the filter, so a routine filter clean is a sensible first check when the manual identifies the filter as user-accessible.
Remove the lower rack and take out the filter only as the owner’s manual describes. Rinse it under running water and use a soft brush with mild soap if needed, then reinstall it securely. Avoid reaching blindly into the pump opening: broken glass, sharp fragments or other debris may be hidden there. Some Bosch instructions describe checking the pump cover beneath the filter, but access and procedure vary. If the cover is difficult to locate, loose, damaged or not clearly user-serviceable in your manual, stop and leave it to a technician.
A clear filter does not rule out a clogged drain hose, a plumbing restriction, a blocked pump or a pump failure. Owners can look at the exposed hose for a visible kink and check whether the sink or garbage-disposal connection is draining normally. Do not disconnect the hose or reach inside the pump. If the code returns after cleaning the accessible filter, or water remains in the tub, repeated resets are unlikely to solve the underlying problem.
Heating, pump and control faults need a firmer boundary
E01, E04, E09 and E21 are associated with heating, heat-pump or internal control problems in the reference material. E02 and E03 may also indicate control-board relay faults on some Bosch ranges. E05, E06 and E19 point to diverter, door-sensor or detergent-dispenser circuitry, while E07 and E10 apply to Zeolite or CrystalDry features on models that have them. These are not diagnoses that can be confirmed by looking at the display alone. They involve components inside the appliance and should be assessed by a qualified appliance technician.
It is reasonable to check simple external conditions, such as whether the door closes without an item caught in the seal or whether a tall dish is preventing a spray arm from turning. A user can also inspect the detergent compartment for dishes blocking its lid. Those checks do not involve opening the machine. Do not remove panels, test electrical parts, handle wiring or attempt to replace a heater, motor, sensor or control board. If the machine smells burnt, makes an unusual electrical sound or repeatedly stops during heating, discontinue use and seek professional assessment.
E12 is a different kind of alert: the supplied Bosch description associates it with limescale buildup in the heat pump. Mineral deposits are more likely where the household water is hard and can affect performance over time. Use only a dishwasher descaler suitable for the appliance and follow its product and manual instructions. If the model has a water-softening system, the manual explains whether dishwasher salt is required and how to maintain it. Descaling may help with mineral buildup, but it will not repair a failed heater or pump.
Not every display or light is an error code
A Bosch dishwasher can show indicators that call for attention without reporting a mechanical fault. A tap symbol or check-water light generally points toward a water-supply issue, while salt and rinse-aid indicators mean their respective reservoirs may need replenishing on models equipped with them. A red light projected onto the floor is often an operating indicator; if it flashes, consult the model manual rather than assuming it has one universal meaning. Symbols and indicator lights are separate from the alphanumeric fault codes.
H01, h02 and similar displays can represent a delayed-start setting rather than a failure. In the supplied Bosch reference, H01 indicates a one-hour delay and h02 a two-hour delay. The control used to cancel the delay can vary, so consult the appliance instructions and look for the start-time or delay-start setting. A countdown shown before the cycle begins is not, by itself, evidence that the dishwasher is broken.
Beeping is also a symptom, not a code with one fixed meaning. It may accompany an end-of-cycle signal, a door that has not latched properly or a separate water or drainage alert. Check the display and indicator lights, then make sure nothing is obstructing the door. If beeping happens alongside a leak warning, standing water or a recurring fault code, the associated alert is more informative than the sound itself.
Resetting the dishwasher does not repair the cause
A temporary electronic error may clear after the dishwasher is switched off using its controls and then restarted, following the instructions for that model. If the same code returns, treat it as an unresolved fault. A reset cannot remove limescale, clear a blocked filter, repair a leak or restore a failed pump. Repeatedly restarting a machine that is leaking or showing an internal heating fault can make a simple situation harder to assess.
Some Bosch troubleshooting material recommends interrupting power at the breaker for certain electronic codes. Because this involves the home electrical supply, do not attempt it if you are unsure how to operate the breaker safely or if the appliance’s instructions do not tell you to do so. Never remove covers or handle electrical connections. For a persistent low-voltage code such as E27, the household supply should be checked by a qualified electrician rather than tested by opening the appliance.
Before arranging service, note the exact code, when it appears and what the dishwasher was doing at the time. Record whether the tub contains standing water, whether the machine fills, drains or heats, and whether the warning returns immediately after a restart. The model number helps distinguish between code definitions that vary by generation. Clear observations are more useful than an attempted internal repair.
When a technician should take over
Stop using the dishwasher and seek qualified help when E15 appears, water is visible around or beneath the appliance, or a leak-protection alert returns. The same boundary applies to persistent pump, heater, motor, sensor and control-board codes, including E01, E04, E09, E21 and E23 when the model manual identifies them as internal faults. A burning smell, smoke, repeated tripping of the household electrical circuit or a damaged inlet hose also calls for prompt professional attention. Do not run another cycle to see whether a leak or electrical symptom disappears.
Simple, low-risk checks are limited to accessible items: closing the door, clearing an obstruction, cleaning a removable filter, checking the visible hose for kinks and confirming the water tap is on. Beyond that, internal diagnosis can involve live electrical parts, water connections or components that are difficult to access safely. Bosch code meanings are model-specific, but the practical distinction is clear: clean what the manual identifies as user-maintainable, and leave internal faults to a qualified technician.
A displayed code is the dishwasher’s way of narrowing down what it has detected, not a promise that one part has failed. Matching the alert to the correct model, checking only accessible items and paying attention to whether the fault returns can prevent guesswork. When water, heat, electrical components or internal pumps are involved, a cautious stop is the most useful next step.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Magazine2 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Daikin6 days agoDaikin heat pump error codes: meanings and safe checks
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Air fryer6 days agoCecotec air fryer E1 error: what to do safely
Magazine6 days agoMan affected by smoke in Valladolid fire
Magazine5 days agoHow to Clean a Washing Machine and Fridge: Samsung’s Guide
Heat pump6 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Heat pump5 days agoHitachi heat pump error codes: meanings and safe solutions
Boiler5 days agoImmergas boiler error codes: meanings and safe solutions
Air fryer6 days agoE3 error on a Cecotec air fryer: what to do and what to avoid





















