we recommend using tablet detergents. – Put the dishes as indicated in the instruction manual. – Before starting the program
- Error: The dishes are not clean
- Description: • The polishing is not enough – • The detergent dosing cover has been left open – • The selected program is not adequate. – • The detergent is saved in non -optimal conditions. – • The propeller holes are obstructed. – • The filters are not well installed. – • The detergent is not enough. – • The dishes is not placed in an orderly manner inside the machine. – • The filters are obstructed. – • The propellers are stuck. – • The baskets are overloaded.
- Cause:
- Solution: Select a program with a higher temporal temperature and cycle. – Do not overload the baskets above their capacity. – Check the polishing indicator and greenery. If necessary. Increase the brightener adjustment if there is not enough overlook on the machine. – Check the filter system and make sure you are correctly installed. – If you are using powder detergent, adjust the amount of detergent according to the degree of dirt of the dishes and/or the definitions of the program. We recommend using tablet detergents to obtain optimal results. – Check if the filter system is clean. Clean the filter system regularly as shown in the cleaning and care” section. – Be sure to close the detergent dosing correctly after adding detergent. – The lower and higher holes may be obstructed with food remains such as lemon pepitas. Clean the drivers regularly as shown in the “cleaning and care” section. – If you are using powder detergent
turn the lower and upper thrusters with your hand to make sure they turn freely.”
Solve the error code The dishes are not clean in Beko dishwasher
Other error codes in Beko dishwasher
No posts found.