Connect with us

Robot aspirador

Roborock error codes: what they mean and what to do

From jammed wheels to charging faults: understand each alert without opening the robot or buying parts blindly.

Published

on

Revisión de ruedas y cepillos ante códigos de error de un robot aspirador Roborock

A Roborock that stops with an alert does not necessarily need repairing: hair may be caught around a wheel, dust may be covering a sensor, or the filter may still be damp. On the S6 Pure, errors 5, 7, 10 and 13 refer to the main brush, main wheels, filter and charging, respectively. Always interpret the number alongside the message and exact model. If the alert persists after accessible maintenance checks, a qualified technician should investigate the cause.

If you have a problem with your robot vacuum, you can use our free error code finder. It helps you identify errors and find straightforward, effective troubleshooting guidance.

The model and message matter as much as the number

Roborock alerts describe different situations: an obstacle preventing movement, an incorrectly fitted part, an unsuitable temperature or a malfunction. An error code is therefore a diagnostic clue, not an instruction to buy a replacement part. A wheel may be blocked by a cable; an alert identifying that wheel does not prove its motor has failed.

The table below covers meanings documented for the S6 Pure and separately identifies error 42 on the S7 Max Ultra. It should not be treated as a universal catalogue for every generation. Before using it, check the model name on the appliance label or in the app, and keep the full alert message, particularly if it differs from the description shown.

Some Roborock vacuum documentation does not cover robot vacuums at all. The H7M1A, for example, is a handheld vacuum, and its screen messages cannot be used to interpret alerts on an S6 Pure or S7 Max Ultra. Terms such as internal error or fan error may sound similar, but transferring codes between appliances can lead to incorrect diagnoses and unnecessary purchases.

Documented codes and the checks you can safely make

On the S6 Pure, a fault during cleaning can trigger a rapidly flashing red light and a voice alert. The S7 Max Ultra may also display a notification in the app, while its dock has separate status indicators. The table distinguishes description, cause and action so that a symptom is not mistaken for proof that a particular part has failed.

CodeDescriptionStated causeSafe check and limitDocumented model
Error 1Laser head problem.Jammed LDS navigation unit.Remove visible external obstructions without forcing or dismantling the head. Try a different location.S6 Pure
Error 2Bumper stuck.Dirt or objects preventing movement.Clean the outside and gently press the bumper to check that it returns, without striking it hard.S6 Pure
Error 3A wheel is suspended.The robot is not fully supported by the floor.Place the robot on a flat, clear surface.S6 Pure
Error 4Cliff sensor alert.Robot suspended or sensors dirty.Move it away from edges and wipe the sensors with a soft, dry cloth.S6 Pure
Error 5Main brush blocked.Hair or debris around the brush and its supports.Switch off the robot and clean the removable brush as described in the manual.S6 Pure
Error 6Side brush blocked.Tangled fibres or objects.Remove accessible debris with the robot switched off.S6 Pure
Error 7Main wheels blocked.Objects or fibres preventing rotation.Remove visible obstructions without dismantling wheel modules and try another location.S6 Pure
Error 8Robot trapped.Obstacles surrounding the appliance.Clear the surrounding area and place it somewhere unobstructed.S6 Pure
Error 9Dustbin or filter not detected correctly.Missing or incorrectly fitted component.Refit both components and check their catches.S6 Pure
Error 10Filter damp or blocked.Incomplete drying or accumulated dirt.Clean the washable filter and allow at least 24 hours to dry; replace if appropriate.S6 Pure
Error 11Strong magnetic field.Proximity to magnetic tape.Move the robot away from the tape and start again.S6 Pure
Error 12Battery too low.Insufficient charge to operate.Recharge before starting another cleaning task.S6 Pure
Error 13Charging error.The manual directs users to check the contacts; it does not identify a single internal cause.Wipe contacts with a dry cloth and the dock unplugged. If it persists, seek technical diagnosis.S6 Pure
Error 14Battery error.Battery temperature too high or too low.Wait for a normal temperature without applying artificial heating or cooling.S6 Pure
Error 16Robot tilted.Unsuitable supporting surface.Place it on level ground and start again.S6 Pure
Error 17Side brush module fault.Module malfunction.Consult the reset instructions for the model. If it returns, seek technical assistance.S6 Pure
Error 18Vacuum fan fault.Fan malfunction.The manual advises a system reset; do not open the robot or work on the motor.S6 Pure
Error 22Charging sensor dirty.Dust interfering with detection.Wipe the accessible area with a soft, dry cloth.S6 Pure
Error 23Dock location beacon problem.Obstructed dock area or dirty locator.Clear access and dry-wipe the locator.S6 Pure
Error 24No-go zone or virtual wall detected.Position conflicts with map restrictions.Move the robot to an allowed area and review the map.S6 Pure
Error 26Wall sensor dirty.Dust on the sensor surface.Wipe with a soft, dry cloth.S6 Pure
Error 42Maintenance brush jammed.Blocked dock washing brush.With the dock unplugged, clean only the removable assembly intended for user maintenance.S7 Max Ultra
No number: internal errorInternal malfunction.The message does not identify the component responsible.Consult the model-specific reset instructions and seek a technician if it recurs.S6 Pure

The gaps in numbering are deliberate: missing codes have not been filled in using meanings from other ranges. If your robot announces a different number, or pairs one of these numbers with a different message, its own documentation takes priority. The same principle applies to docks with different emptying, washing, refilling or drying functions.

Before cleaning moving parts, switch off the robot and remove it from the dock; unplug the dock before maintaining it. Checks must stay within accessible user-maintenance areas. Opening a user lid to empty the dustbin is not the same as opening the casing, dismantling a transmission or accessing internal connections. Those tasks fall outside household troubleshooting.

Jammed wheels and brushes do not prove a motor has failed

Errors 3, 7 and 8 can all stop movement, but they describe different situations. A suspended wheel needs proper support; a blocked wheel encounters resistance; a trapped robot lacks room to escape. On a fringed rug, for example, freeing the visible fabric and moving the robot to a firm, clear floor may be enough, without touching any internal mechanism.

With the appliance switched off, inspect the areas around the wheels and brushes. Remove only hair, thread or small objects you can reach without forcing parts or pushing tools inside. The main brush is generally designed to be removed for maintenance, but follow the specific manual. If a wheel remains resistant, do not repeatedly run the robot to force it free: stop testing and arrange an inspection.

The distinction between errors 6 and 17 also helps prevent premature spending. On the S6 Pure, the first points to a tangled side brush; the second indicates a module fault. Neither allows you to choose a replacement solely by appearance. If a wheel assembly is eventually required, confirm the model and fitting side: left and right units should not be assumed interchangeable.

Sensors need a clear view, not improvised adjustments

A film of dust can interfere with navigation without any sensor being broken. On the S6 Pure, alerts 4, 22 and 26 concern the cliff, charging and wall sensors; error 1 concerns the laser navigation assembly. Home maintenance means removing surface dirt with a soft, dry cloth, without spraying cleaners, lubricating the head or taking off its cover.

For error 2, the bumper should return to its normal position after gentle pressure. Debris lodged around its edge can hold it in, as though the robot were still touching furniture. If it does not return freely, or the warning reappears without obstacles, the limit is clear: do not separate the casing to find the switch. A technician should check the mechanism and its detection system.

Cliff sensors require particular care. Do not cover them to make the robot cross a surface it misreads, and never replace physical barriers at stairs with map restrictions. Error 24, meanwhile, can be caused by a virtual wall rather than a failed sensor. Checking the robot’s position in the app helps distinguish a configured restriction from a navigation problem.

A filter can look dry and still trigger an alert

Error 9 on the S6 Pure calls for checking that the dustbin and filter are present and properly seated. Error 10 points to moisture or blockage. Keep the two separate: refitting an incorrectly closed bin does not resolve a clogged filter, while washing a filter does not necessarily fix a faulty catch. Reduced suction can also result from a full dustbin or a tangled main brush, even when no code appears.

Drying time matters. S6 Pure documentation recommends 24 hours and specifies at least that long for error 10; S7 Max Ultra documentation also specifies 24 hours before refitting a washed filter. This is a minimum reference, not permission to install it while damp if conditions slow drying. It should only go back into the appliance when completely dry, without using intense heat to speed the process.

If the warning continues with a clean, dry, compatible and correctly fitted filter, repeatedly buying filters is no longer a useful check. The code describes a detected condition and does not, by itself, confirm which part causes it. Replacing a deteriorated filter may be appropriate, as the manual allows, but a persistent fault calls for diagnosis before further replacements, rather than automatically blaming the circuit board or fan.

Charging and temperature alerts need careful interpretation

A red light does not always mean a fault. On the S6 Pure and S7 Max Ultra, a steady red robot indicator means the battery is below 20%, while flashing red is used for error alerts. The dock indicator may also switch off during normal charging. Interpretation needs to combine colour, flashing pattern and message; a dock with its light off is not necessarily without power.

For error 13 on the S6 Pure, the accessible check is to dry-wipe the robot and dock contacts with the dock unplugged, then visually check for obstacles preventing proper docking. Do not bridge contacts, test internal connections or experiment with generic chargers. Stop using a damaged power cable. Battery, power supply and charging circuit work belongs to qualified personnel.

On this model, error 14 refers to battery temperature being too high or too low; it does not immediately require a replacement battery. Allow the appliance to return to a normal room temperature without placing it near a radiator or artificially cooling it. The S6 Pure documentation gives different ranges in different sections, so a universal threshold would be inappropriate here. Unusual heat, smell or deformation calls for stopping use and charging.

The dock can develop a fault while the robot still vacuums

On the S7 Max Ultra, a steady red dock light indicates a station error, while the robot can signal its own fault with a flashing red light. Error 42 concerns the maintenance brush used during mop washing. Do not confuse it with the main brush that collects dirt from the floor: these are separate assemblies, with different locations and functions.

Safe checks focus on correctly seated tanks, available clean water, an attended dirty-water tank, an installed dust bag and removable components free of debris. For error 42, clean the maintenance brush only as described in the manual, with the dock unplugged. Do not open pumps, electrical connections or internal pipes to search for a blockage. Leaks or a persistent jam require inspection of the station.

Placement also affects performance. The S6 Pure requires more than 0.5 metres of clearance on each side of its dock and more than 1.5 metres in front; the S7 Max Ultra specifies at least 1 metre in front and above. These are model-specific measurements, not interchangeable ones. A firm, level floor, without direct sunlight on the locator or objects blocking it, supports reliable return and docking without internal adjustments.

Resetting the connection is not the same as resetting the robot

A Wi-Fi problem does not prove there is a mechanical fault. The S6 Pure and S7 Max Ultra use 2.4 GHz networks; incompatible router settings or a changed password may prevent pairing with the app. If the appliance responds to its buttons and reports no other fault, troubleshooting should focus on the wireless connection, following the current app instructions for that model.

Switching off and on, resetting Wi-Fi and restoring the system are different operations. The manuals for these models explain that a system reset can return the connection and schedules to factory settings. It is not a consequence-free test: save the error message first and check which settings will need to be configured again. A full factory restoration should be reserved for the situation described in the manual, not used as the first response to every jam.

Some stops are also part of normal operation. On the S6 Pure, scheduled cleaning requires a battery level above 20%, and Do Not Disturb mode can prevent a task from continuing. Both documented models have a default Do Not Disturb period of 10 p.m. to 8 a.m. Manually placing the robot on the dock can also end the current cleaning task. These conditions can explain an interruption without proving a software fault.

A specific diagnosis prevents blind repairs

An inspection becomes appropriate when the same alert returns after obstacles have been removed, permitted areas cleaned and removable components checked for correct fitting. Keep the number, message, model, an app screenshot and a note of when it happens: at startup, while turning, during charging or while washing the mop. That context helps distinguish a repeatable fault from a problem caused by the surroundings.

The available information does not support a reliable repair price. To make a decision, an estimate should identify the diagnosed problem and separate, where applicable, inspection, labour, parts and transport. Do not assume the initial inspection fee will be credited towards the repair. Comparing the total with the cost of an equivalent appliance, battery condition and other wear provides a meaningful financial basis, without inventing a universal percentage.

If the appliance may still be under warranty, keep the receipt and check its terms before opening casings or authorising replacement parts. User maintenance is not the same as an internal repair, and not every intervention can be assumed to have the same consequences. The strongest decision starts with model, message and safe checks: clean what is accessible, stop where risk begins and replace components only when the diagnosis supports it.

This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.

Most read