Microwave
Samsung microwave errors: codes and safe troubleshooting
What Samsung alerts mean, what to check without taking anything apart, and when to leave the microwave unplugged.

Samsung microwave errors can indicate a stuck key, a sensor fault, a door problem or failed electronic communication. SE, 5E and C-d0 usually relate to the keypad, while other alerts depend heavily on the model. Record the full message before resetting. If the appliance starts on its own, sparks, smells burnt or has a damaged door, stop using it and unplug it if you can do so safely.
If you have a problem with your microwave, you can use our free error code finder. It can help you identify errors and find straightforward, effective troubleshooting information.
The code provides a clue, but the model determines its meaning
Samsung does not use a single fault chart for every microwave. Its range includes basic appliances, models with a grill, convection units and different generations of controls. As a result, a message does not automatically identify a broken part: it may describe an abnormal reading, a continuous input or an operating condition that needs checking.
This matters particularly with E11 and E-11, described in the available references as gas or humidity sensor problems, and with E83 or E-83, linked to both communication and door faults. Removing a hyphen or choosing the most frequently repeated explanation does not resolve those discrepancies. The specific model documentation takes precedence over any general list.
Look for the model reference on an accessible label around the frame, door area or exterior, depending on the appliance. It may also appear in the purchase paperwork. A photograph of the display and another of the label preserve the details without confusing similar characters. Do not dismantle the panel to find identifiers or remove a built-in microwave if that requires undoing fixings or accessing connections.
Samsung alerts and their possible interpretations
This table brings together the messages found in the available references and separates broadly consistent interpretations from ambiguous ones. It is not a universal Samsung fault chart, nor does it confirm that your appliance uses every code shown. The causes are indicative; checks involving sensors, wiring, circuit boards or internal mechanisms belong to an authorised technician.
Open circuit and short circuit describe how the electronics interpret a signal. An open circuit may involve the sensor itself or its connection; a short circuit does not, on its own, establish which component has failed either. The alert identifies an abnormality, not a confirmed replacement part. That distinction can prevent an unnecessary purchase.
| Code | Indicative description | Associated cause or condition | Safe action |
|---|---|---|---|
| SE / 5E / -SE- | Stuck key or short-circuit signal from the keypad. | Prolonged button press, dirt, moisture or a control assembly fault. | Unplug and clean only the exterior. If it returns or the controls activate spontaneously, do not use. |
| C-d0 | A continuously pressed key is detected; some references specify more than 10 seconds. | Pressed button, damp panel or keypad fault. | Remove anything resting against the controls and inspect the surface with the appliance unplugged. |
| C-d1 / C-d2 | Door or key-related alerts on certain ranges. | Interpretation depends on the model. | Check the door externally and confirm the meaning in its manual. |
| E11 / E-11 | Sensor fault, described as gas or humidity depending on the reference. | Open signal or abnormality in the sensing circuit. | Confirm which sensor the model uses; internal inspection requires a professional. |
| E12 / E-12 | Short-circuit sensor signal. | Sensor or associated circuitry. | Do not access the sensor or its connections. |
| E13 / E-13 | Maximum T1 time for the sensing process. | The expected reading is not obtained within the specified limit. | Check the programme operating conditions and arrange diagnosis if it recurs. |
| E14 / E-14 | Dry or no-load condition in some references. | Abnormal detection during a sensor programme; this does not confirm a failed sensor. | Do not run empty tests; check the programme requirements. |
| C-10 / C-11 / C-12 | Sensor alert group on certain models. | The references group different sensors together without defining each variation. | Confirm each code against the appliance documentation. |
| C-20 / C-21 / C-22 | Temperature sensor abnormality. | Unexpected sensor reading or circuit condition. | If it persists, leave further checks to a technician. |
| E-21 / E-22 | Open or shorted temperature sensor, respectively. | Sensor, connection or reading circuit. | Do not dismantle; professional diagnosis is required. |
| E-23 | Maximum T1 time associated with temperature control. | The expected condition is not reached within the specified time. | Confirm its scope in the model manual. |
| E-24 / E-25 / E-26 | Excessive temperature, abnormal temperature or unexpected temperature change, depending on the code. | Thermal condition or control fault requiring diagnosis. | Allow to cool, check external ventilation and do not persist if it returns. |
| IE / E0 | Shorted or open thermistor, respectively, in references using these messages. | Temperature sensor or circuit abnormality. | Confirm the characters and arrange inspection if it persists. |
| E-01 | Conflicting descriptions across references: open circuit or thermal sensor fault. | Cannot be determined without identifying the range. | Do not select a replacement part from this code alone. |
| E-02 / E-03 / E-04 / E-05 | Cooking time alerts for microwave, grill, convection or combination operation. | Time setting or monitoring, depending on the programme and model. | Check the programme in the manual; do not equate E-05 with SE. |
| E-06 | Heater alert described imprecisely in the reference. | The heating function must be identified by model. | Confirm the meaning before attributing it to a particular heating element. |
| E-31 / E-32 | References to an open or shorted sensor in a group that also includes weight. | Classification is insufficiently clear. | Do not extrapolate the meaning of E-11 and E-12. |
| E-33 / E-34 / E-35 | Low, high or invalid weight, respectively. | Unsupported load or weight reading on compatible models. | Check programme limits and load placement. |
| E-36 / E-47 | Door-open alert on certain ranges. | Incomplete closure or incorrect door detection. | Remove visible residue; do not manipulate latches or switches. |
| E-41 / E-42 / E-43 / E-44 | Sensor group described as PH or Easy, covering open circuit, short circuit, maximum time or drying. | The reference terminology is insufficient to identify the system. | Consult model-specific documentation; do not infer a sensor type. |
| E-45 / E-46 | Cooling alert or open main circuit, according to the reference. | Internal condition requiring identification of the range. | Professional inspection if the message remains. |
| CE | Checksum or EEPROM memory error. | Internal data fails an integrity check. | A reset may rule out a temporary lock-up; recurrence requires diagnosis. |
| E-51 / E-52 / E-53 / E-54 | Detection, memory, read/write or zero-signal group. | Generic descriptions do not establish a specific faulty part. | Record the exact code and consult technical documentation for the model. |
| E-61 / E-62 / E-63 | Humidity sensor open, shorted or maximum time exceeded. | Humidity sensing signal or circuitry. | Do not access internal components; arrange inspection if it returns. |
| C-70 / C-71 / C-72 | Steam sensor alert group. | Sensor reading or circuitry on ranges fitted with this system. | Confirm the specific code and arrange diagnosis. |
| E-71 / E-72 | Open or shorted steam sensor. | Sensor or internal connections. | Professional intervention. |
| C-A0 / C-A1 / C-A2 | Functional alerts; another reference also links C-A1 to the door. | Meaning differs across ranges or references. | Do not assume they all identify a door fault. |
| E-A1 | One reference links it to door opening. | No confirmed match to a specific range. | Check the manual before equating it with C-A1. |
| C-F0 / C-F1 / C-F2 | Communication error group. | Information exchange between modules. | Reset only if there are no warning signs; arrange inspection if it returns. |
| E-81 / E-82 / E-83 | Open communication, communication short circuit or communication failure. | Internal electronic link; another reference also describes E83 as a door fault. | Confirm the specific meaning without dismantling or bypassing door interlocks. |
| TE | Touch control communication error. | Control system communication. | Professional inspection if it persists after an external check and safe reset. |
| Lo / HI | Low or high voltage in a reference to a battery-powered system. | That particular system lists a minimum of 21.5 V and maximum of 29.5 V. | Do not apply those values to a domestic mains-powered microwave. |
| E-X1 / E-X2 | Generic notation for an additional open circuit or short circuit. | The X does not identify a component or a confirmed specific code here. | Record the actual display message and find its specific documentation. |
Some lists mix other manufacturers’ codes with Samsung codes and present E-05 as equivalent to SE. That equivalence is not established for every appliance: the Samsung-specific list also describes it as a combination cooking time alert. Do not transfer meanings between manufacturers, even when the letters or numbers match.
SE, 5E and C-d0: the keypad detects an abnormal input
SE can look like 5E because of the display segment shapes. The alert usually means the control detects a held key or a signal equivalent to a short circuit in the keypad. For C-d0, some references describe a button press lasting more than 10 seconds. That explains the trigger on certain ranges; it is not a test you should reproduce.
With the appliance unplugged and cool, check whether anything is resting against the buttons or residue is stuck to the surface. Cleaning should stay on the exterior, using a soft, barely damp cloth followed by drying, in accordance with the manual. Do not spray liquid onto the panel, insert tools between keys or try to peel off the membrane.
A message disappearing after cleaning does not prove the keypad has been repaired. If it returns without anyone touching the controls, there are spontaneous beeps or the appliance receives unrequested commands, leave the microwave unplugged until inspected. Repeated resets to make it accept a cooking cycle do not remove the underlying fault.
SE does not necessarily mean a complete control panel must be purchased. Depending on the design, diagnosis may involve the keypad, its connections or the control electronics. Compatibility depends on the exact model reference, not simply on a replacement looking the same. Buying before confirming the cause can turn one repair expense into two.
A reset may clear the alert without fixing the cause
The references suggest different reset intervals, from 60 seconds to 5 or 10 minutes. There is no basis for treating any one interval as a rule for every range. If the manual does not specify otherwise and there are no warning signs, unplugging for 60 seconds can serve as an initial check, using only an accessible plug without dismantling anything.
Before doing so, record the code and the active programme. Afterwards, check whether the message returns when reconnecting or selecting a function, without running the microwave empty. If it persists, do not repeat resets or heating tests. Repetition adds little and may obscure the exact point at which the problem occurs.
An alert that disappears may have been temporary, but that does not certify the appliance is sound. An intermittent fault can also stop appearing for a while. What matters is its subsequent behaviour and the nature of the warning: spontaneous starting or a faulty door rules out further use, even if the display returns to showing the time.
Sensors monitor conditions, not just components
Automatic programmes use temperature, humidity or steam signals to adjust operation on models equipped with those systems. A sensor error may therefore appear during a particular programme rather than when the appliance is switched on. The point at which the code appears helps a technician distinguish a permanent abnormality from one associated with a particular function.
E-14 illustrates that distinction: the references describe drying or no load, while another simplifies it to a humidity sensor fault. Those are not equivalent diagnoses. If it appears, check the programme requirements and whether a suitable load is present, but do not carry out empty tests or assume that simply adding food will solve it.
For thermal alerts such as E-24, allow the appliance to cool and look for objects or accessible dirt blocking the external vents. Follow the clearances in the manual without moving a built-in unit yourself. Cooling does not repair a faulty sensor: if the alert returns, a professional check is needed.
It also matters whether the issue is a programme limit or a fault. Weight or time alerts may call for checking the selected function and its permitted conditions. No single food quantity or maximum time applies to every model; the valid limits belong to each programme, not to a generic table.
The door is a safety boundary that must not be forced
Dried residue around the closing area can prevent the door from sitting correctly. With the appliance unplugged, accessible surfaces can be cleaned and visually checked for an obstructing container. The door should close normally: do not slam it or force the latches to make the microwave start.
E83 needs particular care because the references associate it with both communication and door switches. Without model-specific documentation, neither explanation can be selected reliably. Even if the message concerns the door, internal switches are not a household troubleshooting check; users should not test, adjust or bypass them.
A misaligned door, damaged hinge or latch that only works when the door is lifted by hand justifies stopping use. Holding it shut during heating is not a temporary solution. An intact door closure is a safety requirement, not an inconvenience that can be worked around by changing programmes.
A blank display or stationary turntable is not always a fault
A display without a clock may be caused by Eco mode on models that include it. Likewise, an unresponsive control panel may have the child lock enabled. Not every symptom is a breakdown: consult your model’s procedure before blaming the circuit board. Some ranges use a 3-second press for the lock, but the button or combination varies.
If the turntable does not rotate, the plate and support ring can be removed from a cool, unplugged appliance to clean away food residue and refitted according to the manual. Check that the container does not catch against the walls. Do not access the motor through the base; if cleaning and positioning do not solve the problem, further inspection is no longer a user task.
Noises do not identify a faulty component on their own either. A rubbing support ring and a loud electrical hum are different symptoms, but neither condemns the magnetron without diagnosis. If there are sparks, a burning smell or an unusually loud noise, stop operation and do not repeat the test. If there is smoke inside, keep the door closed and disconnect the power only if safe.
A repair starts by confirming what has failed
Household checks stop at the surface, removable accessories intended for cleaning and functions described in the manual. Removing the casing changes the risk entirely: a microwave can retain high voltage when unplugged. Fuses, capacitors, diodes, the magnetron, circuit boards and internal connections must remain outside any user intervention.
Before authorising a repair, the useful information is not just the code but the diagnosis and scope of work. An estimate should explain what will be replaced and how call-out and diagnostic charges work, without assuming the visit fee will later be deducted. The display cannot establish a repair price, and the available references do not support a reliable price for each fault.
The decision to repair or replace does not depend on age alone either. Compare the confirmed total cost with an equivalent new appliance, consider the condition of the door and cavity, and check availability of the correct part. If warranty cover may apply, check its terms before dismantling anything or commissioning work; opening the appliance is neither a harmless check nor necessary to identify the model.
For an inspection, keeping the full code, appliance reference and circumstances of the fault is more useful than accumulating attempts to run it. An isolated alert may remain a one-off incident; a recurring one needs diagnosis. A cleared message does not replace a safety assessment after unexpected starts, door damage or signs of overheating.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine4 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine5 days agoJura coffee machine error 8: what to do and repair costs
Microwave6 days agoError 2 on a Whirlpool microwave: causes and what to do
Coffee machine4 days agoPhilips coffee machine error 1: causes and safe cleaning
Microwave6 days agoSiemens microwave error 1007: what to check and when to stop
Coffee machine5 days agoSaeco coffee machine error 1: what it means and what to do
Magazine2 days agoCommunal boiler to heat pump: CAE multipliers up to x6
Fridge5 days agoLG fridge FF error: what it means and what to do
Beko6 days agoBeko fridge E4 error: what it means and what to do
Coffee machine5 days agoSaeco error 5: causes and checks without taking it apart
Magazine4 days agoXiaomi launches steam air fryer in Spain for €179.99
Daikin4 days agoDaikin heat pump error codes: meanings and safe checks





















