Oven
Samsung oven error codes: meanings and safe solutions
Not every message means a fault: the divider, a damp control panel or preheating can explain some oven alerts.

Messages on a Samsung oven do not always mean a component has failed: C-d0 usually points to a prolonged button press or moisture on the controls; dC and, on certain models, dE relate to the Dual Cook divider. By contrast, C-20, C-21 and C-22 indicate sensor faults that need attention if they persist. What to do depends on the code and the model: switch the oven off, check only accessible areas and stop using it if there is a burning smell, abnormal heating or a tripping RCD.
If you have a problem with your oven, you can use our free error code finder. It can help you identify errors and find straightforward, effective ways to address them.
The exact code and model change the diagnosis
Samsung uses different messages depending on the range, market and appliance features. A conventional oven, an oven with a Dual Cook divider and a convection microwave do not necessarily share the same diagnostic system. It is therefore unreliable to classify every code by number range, automatically assigning C-10 codes to the door or C-40 codes to the fan. The full appliance model number makes it possible to check which interpretation actually applies.
Before switching it off, photograph the display and preserve every hyphen, letter and number. C-d0 and C-d1 look similar at a glance, but they point to different situations: the first concerns the control panel and the second the door lock. Also note whether it appeared at switch-on, when selecting a function, during preheating or after cleaning. The point at which it appears provides useful information without taking anything apart.
The model identifier appears on the rating label and in the purchase documents. If the label is not accessible, look in the manual or on the receipt first; do not pull out a built-in oven to find it. When general guidance conflicts with the instructions for your appliance, the model-specific manual takes priority. A code provides a clue about what the control system detects, but does not identify the component that needs replacing on its own.
Display messages and what they mean
The table below distinguishes messages described by Samsung for certain oven families from other interpretations found in general compilations that should not be treated as universal. The action column includes only safe external checks. Internal sensor, lock or electronics faults are for an authorised technician to investigate if they remain after the permitted checks.
| Code | Description | Cause or associated condition | What you can do |
|---|---|---|---|
| C-d0 | A prolonged button press has been detected. | A held button, moisture, water or residue on the control panel. | Switch off, gently clean and dry the panel. Restart once dry. Arrange an inspection if it returns. |
| dC / dE | Divider check on certain Dual Cook ovens. | The divider has been removed during dual cooking or inserted during single cooking when the mode does not allow it. | Cancel cooking, allow the oven to cool and position the divider to suit the mode specified in the manual. |
| C-d1 | Door lock fault. | Abnormal operation of the locking mechanism. | Check for visible obstructions without forcing the door. Restart once if there are no warning signs; arrange an inspection if it persists. |
| C-20 / C-21 / C-22 | Sensor fault. | Abnormal sensor reading or operation; the details depend on the model. | Switch off and allow to cool. If the message returns after the permitted restart, stop cooking and arrange a diagnosis. |
| C-23 | Associated with sensors in some model-specific tables. | Must be confirmed in the manual; it does not appear in every general Samsung code list. | Check the oven model number. Do not interfere with sensors or connections. |
| C-F0 | Communication fault between boards. | The main and secondary control boards are not communicating correctly. | Restart as instructed in the manual. If it returns, professional attention is needed. |
| C-F1 | Error during EEPROM memory reading or writing. | A problem accessing electronic memory. | Carry out one permitted restart. If it continues, arrange an inspection without opening the appliance. |
| C-F2 | Touch panel communication fault. | Abnormal communication between the touch controller and the main or secondary electronics. | Check that the panel is clean and dry. Restart; arrange an inspection if it persists. |
| S-01 | Safety shut-off after prolonged operation. | The time limit for a temperature setting or function has been reached. | Switch off, remove food when safe and check the programme limits in the manual. |
| Pr E | Preheating on models that use this message. | The oven has not yet reached the selected temperature. | Keep the door closed and wait. This message alone does not require a restart. |
| C-10 / C-11 / C-12 / C-13 | No confirmed universal meaning for conventional ovens. | Some compilations attribute them to the door, but similar codes also exist on other appliances. | Do not buy a door lock based on a generic table. Consult the exact model manual. |
| C-30 / C-31 / C-32 / C-33 | No confirmed general correspondence with heating elements. | The numbering alone cannot identify which heating component has failed. | Do not cycle through the grill and other modes to identify a faulty element. Confirm the meaning for the model. |
| C-40 / C-41 / C-42 / C-50 / C-51 | Generic interpretations are not verified across all ranges. | Attributions to fans or electronics require model-specific documentation. | Record the message and check the manual before assigning it to a component. |
| OE / SE | No universal meaning across Samsung ovens. | Possible confusion between characters, product ranges or other appliance code tables. | Photograph the display and verify the code for the model. Do not assume a probe fault or a simple incorrect setting. |
One particularly important discrepancy concerns dE: some guides translate it directly as a door error, while Samsung includes it alongside dC among divider messages on certain ovens. It is also unsafe to interpret SE as nothing more than an incorrect setting. Similar-looking characters and mixed tables covering microwaves, hobs and ovens can lead to the wrong diagnosis.
A damp control panel can stop an oven without an internal fault
C-d0 appears when the controller detects a button being pressed for too long. This can happen after wiping the controls with a wet cloth, because of droplets around the buttons or because an object is touching the control surface. With the oven switched off and cool, remove anything touching the controls and use a soft cloth, barely damp if necessary, followed by a dry one. Avoid spraying liquid directly onto the panel.
There is no need to press every key hard or keep trying to release it. Cleaning should be limited to the outside surface, without lifting buttons or inserting objects around their edges. Once the panel is completely dry, switch the appliance on again as instructed. If C-d0 returns when nobody is touching it, home checks have reached their limit: it may need control assembly diagnosis, not more pressure on the keys.
An unresponsive panel does not prove that a circuit board has failed either. The child lock can disable the controls without any fault being present. The release sequence depends on the model; some use a 3-second press, but that duration should not be applied to any button at random. Check the symbol and the correct procedure before treating the lack of response as an electronics fault.
The Dual Cook divider is not a shelf
On compatible ovens, the divider separates the cavity for dual cooking. Its position is one of the conditions the controller needs to recognise. Samsung states that it should be inserted for Dual Cook and removed for Single Cook on the models covered by this message. The dC message, sometimes shown with hyphens, can reflect a mode and divider mismatch, rather than a door latch fault.
Make adjustments only after cancelling cooking and allowing the cavity to cool enough to handle the accessories without burns. Do not remove the divider during dual cooking or use it as a shelf to support dishes. Visually check that it sits in the position shown in the manual, without forcing it into place. You can then select a compatible cooking setup for whether the divider is fitted or removed.
If the message continues with the divider correctly fitted and the right mode selected, switch the oven off and back on. A persistent message is not a reason to keep moving the divider repeatedly or try to operate its detection mechanism by hand. That boundary helps prevent a simple adjustment from turning into additional damage. Inspection of the internal divider detection system should be left to a professional.
A locked door needs patience, not force
C-d1 relates to abnormal operation of the door lock on models that use this code. Before assuming the lock is broken, check from outside that no tray is sticking out and no visible object is preventing closure. Not every oven produces a locking click when the door closes normally: door closure and automatic locking are not necessarily the same operation.
After a high-temperature cleaning cycle, the door may remain locked while the interior cools. Do not pull hard on the handle or insert tools to release the latch. If the oven is still hot, waiting for the manufacturer’s intended release is different from trying to clear a fault. Once the appliance is cold, a persistent code calls for inspection of the mechanism.
Breaking a handle or latch component by forcing the door can add a separate repair to the original problem. If warranty cover may apply, it is also better to keep photographs and follow the manufacturer’s instructions before dismantling anything. The consequences of DIY work depend on the applicable terms and any damage caused; do not assume that opening the appliance has no implications for a claim.
Sensor and communication faults do not identify a replacement part
C-20, C-21 and C-22 are described as sensor faults in Samsung’s general information for these product families. That does not establish that they all concern one particular NTC sensor, or that C-22 always means a faulty heating element or overheating. The details depend on the circuit monitored by each appliance. If the reading is unreliable, the oven may lose its ability to regulate cooking correctly.
Cleaning the cavity is not the same as repairing that circuit. Do not scrub a probe in an attempt to clear the code or remove the rear panel to inspect connectors. Switch the appliance off, allow it to cool and carry out only the restart permitted by its manual, provided there are no warning signs. If the message returns, do not change programmes to keep cooking: it needs professional sensor and circuit checks.
C-F0 and C-F2 describe communication problems, while C-F1 concerns operations involving EEPROM memory, where the electronics store information. None of them proves on its own that the main board needs replacing. Several related components may need checking, and choosing a part from the message alone risks spending without a diagnosis. Replacement parts should not be purchased until the cause has been identified.
Preheating and safety shut-off need a different interpretation
Pr E means preheating on models that display this abbreviation. The message disappears when the set temperature is reached, and keeping the door closed during this phase prevents heat loss. It is not an instruction to restart or proof that the oven has stopped heating. An oven that remains in this phase indefinitely while the cavity stays cold is a different matter: the appliance’s actual behaviour matters, not just the display text.
S-01 indicates a safety shut-off after prolonged operation at a set temperature. It is not, by itself, considered a system fault. Some model tables specify limits of 16 hours below 105 °C, 8 hours from 105 °C to 240 °C, and 4 hours from 245 °C to the maximum setting. These are model-dependent limits: do not apply them to other ranges or infer what happens in temperature intervals that are not described.
After this shut-off, cancel the function and remove food when it is safe. Do not use repeated restarts to extend cooking beyond the intended limits. On many ovens, the fan also continues running after switch-off to remove heat; that sound alone does not indicate a fault. The important distinction is between a protective function and new symptoms such as scraping noises, an unusual smell or heating that does not stop.
A restart has limits and must not conceal the problem
For several of the messages above, Samsung advises switching off and on again; if they persist, it specifies disconnecting power for 30 seconds or longer on the models described. There is no universal 5- or 10-minute waiting period for every oven. Follow the manual and unplug only where the plug is accessible, with dry hands and without moving the appliance. If this requires access to connections or work on the electrical installation, do not attempt it.
A code disappearing after a restart does not prove that a component has been repaired. A temporary condition, such as moisture or an incompatible selection, may have ended, but a fault that returns during heating remains significant. Do not make repeated attempts or test different heating elements to see which one works. The same message returning after a safe check is sufficient reason to stop home troubleshooting.
A burning plastic smell, smoke, sparks, an electric shock when touching the appliance or a tripping RCD changes the priority: stop using it and do not reconnect it just to photograph the error. Do not handle wiring or repeatedly reset protective devices. An authorised technician should inspect the oven, and if the building’s power supply may be involved, an electrician should check the electrical installation.
An accurate diagnosis avoids replacing an oven too soon
Before arranging an inspection, gather a photograph of the message, the full model number and a brief explanation of when it happens. Include any recent cleaning, a change of Dual Cook mode or a power cut. This information reduces ambiguity without taking over the professional’s role. The value lies in describing observable facts, rather than presenting a board, fan or heating element fault as confirmed.
The repair price cannot be determined from the code: it depends on the cause, access to the component and the chosen provider’s terms. Before authorising work, establish whether diagnosis and call-out fees are charged separately and whether they are deducted from the subsequent repair. To decide between repair and replacement, compare the confirmed total cost with an equivalent new oven, the appliance’s overall condition and part availability, rather than a generic online figure.
A divider or control panel message may be resolved without replacing anything; a persistent sensor or communication fault needs a different kind of attention. That distinction helps avoid both rushed purchases and acceptance of warning signs. The most useful approach remains specific: identify the message correctly, stay within accessible checks and stop when the work becomes internal appliance diagnosis.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Coffee machine4 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine5 days agoJura coffee machine error 8: what to do and repair costs
Magazine34 minutes agoReplacing boilers with heat pumps: CAE multipliers up to x6
Microwave6 days agoError 2 on a Whirlpool microwave: causes and what to do
Coffee machine4 days agoPhilips coffee machine error 1: causes and safe cleaning
Coffee machine5 days agoSaeco coffee machine error 1: what it means and what to do
Microwave6 days agoSiemens microwave error 1007: what to check and when to stop
Fridge5 days agoLG fridge FF error: what it means and what to do
Beko6 days agoBeko fridge E4 error: what it means and what to do
Coffee machine5 days agoSaeco error 5: causes and checks without taking it apart
Magazine4 days agoXiaomi launches steam air fryer in Spain for €179.99
AEG6 days agoAEG fridge E10 error: what it means and what to do




















