Connect with us

Robot aspirador

The robot that cleans multiple floors can now climb stairs.

Dreame is preparing a solution to clean multi-story homes with less manual intervention.

Published

on

Robot aspirador que sube escaleras mediante una plataforma de orugas en una vivienda

Stairs have been the physical frontier of robot vacuums for years: they can detect the edge of a step, stop before falling, and store maps of multiple floors, but they cannot move between them on their own. That limitation is beginning to change with the Dreame Cyber X, a device designed to take a cleaning robot from one level to another using rubber tracks. It is not an independent robot vacuum, but a specialized transport platform that turns an impossible task into an automated function, although it is still reserved for a very specific market segment and comes at a high price.

If you have a problem with your robot vacuum, you can use our free error code finder. From there, you can find out about and solve all errors easily and effectively.

The barrier that round robots could not overcome

A conventional robot vacuum moves using two drive wheels and a support wheel. That architecture works very well on smooth floors, carpets, and small changes in elevation, but becomes useless when a standard-sized step appears. Although some models include retractable legs or mechanisms to raise part of the chassis, their ability is usually limited to thresholds and obstacles a few centimeters high, not an entire staircase.

The problem is not simply a matter of having enough power. Each step requires maintaining balance, distributing weight, detecting the next edge, and preventing the device from tilting until it falls. There is also an added difficulty: residential staircases do not follow a single pattern. They can be straight, curved, L-shaped, have landings, floating steps, carpets, and rounded edges. Climbing a staircase requires solving mobility, perception, and safety at the same time, three challenges that are considerably more complex than avoiding a table.

That is why it is useful to distinguish between two concepts that are often confused. Multilevel mapping allows a robot to memorize the layout of each floor and clean properly after a person transports it. Movement between floors, by contrast, means that the device can leave one level, travel along the staircase, and reach the next without assistance. The first function is already widespread; the second is only just beginning to become a commercial product.

What the Dreame Cyber X really is

The Cyber X began as a technology demonstration presented at IFA 2025 and appeared again at CES 2026. The initial proposal seemed to be that of a robot vacuum capable of climbing, but the final design presents something different and more practical: a structure with four tracks into which a compatible robot is placed. The main robot does not climb or drive; it remains inside the platform while the transport system performs all the movement.

The decision makes obvious sense. Robot vacuums change quickly, incorporating new cameras, brushes, mopping systems, and batteries, and can become outdated within a few years. Integrating the climbing mechanism into every model would require renewing very expensive technology along with the cleaning device. Separating the platform from the robot makes it possible to upgrade the cleaning equipment without necessarily discarding the system that climbs the stairs, although initial compatibility greatly limits who can use it.

The device has its own vision system and sensors to recognize the staircase, calculate the position of the steps, and control movement. When the robot finishes working on one floor, it approaches the Cyber X base and docks in a way similar to how it searches for its charging station. From that moment on, the platform takes control of the maneuver and the robot becomes a protected passenger inside the structure.

How it climbs and descends a staircase

Movement is based on four rubber tracks, a solution inspired by vehicles capable of traveling over uneven surfaces. The front and rear tracks can be positioned at different angles to increase contact with the steps and distribute the weight. The platform ascends at an approximate speed of 0.2 meters per second, a modest figure compared with a conventional appliance, but enough to complete the transfer in a few minutes.

The system does not drag the robot over the edge of each step as a small wheel would. First, it brings the tracks up to the step, raises the assembly, and adjusts the position of the modules to maintain stability. This sequence reduces the risk of tipping and allows the robot’s body to remain relatively level. The company claims that the design can handle straight, curved, L-shaped, spiral staircases and staircases with floating steps, although this compatibility should be understood as a design capability, not an automatic guarantee for every staircase in a home.

The descent includes specific protection. When it reaches the last step, the platform supports the front section first and then lowers the rear section to prevent a hard impact with the floor. It also has a braking system that can stop movement if the sensors detect a person, pet, or other obstacle. Detection during the journey is essential, because an abrupt stop on a staircase has far more serious consequences than colliding with a chair leg.

Safety, however, does not depend solely on electronics. The width of the staircase, the strength of the steps, the presence of handrails, ceiling height, and the condition of the surface can affect operation. A loose carpet, an object left on a step, or a wet area can alter traction. The platform needs enough approach space to align and dock, meaning that a narrow staircase or one with furniture nearby may be incompatible even if its general shape appears suitable.

A platform that also cleans the steps

The Cyber X is not limited to moving the robot between floors. During the descent, it uses small brushes located on the inner section of the rear track to sweep dust accumulated on the steps. The dirt is directed toward a suction system with up to 6,000 Pa of power, connected to the HEPA filter and the robot’s dustbin, which travels inside.

This function changes the role of the equipment. A household elevator for robots would solve the transportation issue, but would leave the most inconvenient part of the staircase untouched. By collecting dust, hair, and small particles as it descends, the system attempts to turn the transfer into an additional cleaning session. The idea is especially interesting for staircases used daily, where dirt accumulates along the edges of the steps and usually requires a handheld vacuum.

The scope of this cleaning should be qualified. The brushes do not necessarily replace a thorough manual cleaning of risers, corners, baseboards, or areas where hair accumulates. Nor does it mean that the robot will mop the staircase as effectively as a person with a cloth. Its main contribution is vacuuming the horizontal surface of the steps during the descent, while the main robot remains available to work on the corresponding floor.

When it reaches the upper level, the platform retracts the tracks and enters standby mode. The robot disengages, continues its programmed route, and cleans as it normally would. Once finished, it searches for the Cyber X again. The company states that the system can cover up to four floors, a capacity designed for large homes rather than simply overcoming the difference in height between two rooms.

Compatibility, price, and arrival in Spain

The announced price for the Cyber X is 1,199 euros in Spain, not including the robot vacuum. In its first phase, the platform is compatible with the Dreame X60 Pro series, whose entry-level model costs 1,499 euros. This brings the minimum total cost of the system to 2,698 euros before adding possible accessories, installation, or related services, placing it clearly in the premium segment.

The communicated forecast places the launch in September 2026. This is relevant because for months the product was presented as a trade-show concept rather than an available appliance. Converting a prototype into a finished product represents progress, but does not eliminate the usual questions surrounding a first generation: actual availability, technical support, updates, wear parts, and exact warranty conditions.

Compatibility also deserves attention. Simply owning a robot from the brand is not enough for it to automatically fit the platform. The docking system, size, weight, sensor positioning, and communication between devices must match. For now, the X60 Pro family is the announced reference, so owners of other models should not assume that they will be able to use them until Dreame officially confirms each case.

The price makes this a very specific purchasing decision. For a two-story home, it may be cheaper to keep one robot on each level or use a single device with multilevel maps and move it manually. The Cyber X makes more sense in homes with several floors, for residents who cannot carry weight up and down the stairs, or for users who value complete automation above the initial cost. It is not a universal upgrade for every home, but a solution aimed at a specific need.

What should not be confused with climbing stairs

The market has used terms such as climbing, jumping, or advanced navigation to describe very different functions. A robot capable of overcoming a 5- or 6-centimeter threshold cannot climb a residential staircase with steps measuring 17 or 20 centimeters. The retractable legs of the Dreame X50 Ultra, for example, are designed to overcome raised transitions, rails, and small obstacles, not to travel along a succession of steps.

There are also prototypes proposing more ambitious mobility through legs, articulated wheels, or hybrid systems. The Saros Rover shown by Roborock at CES 2026 represents this direction: it combines wheels and leg-like mechanisms to adapt to straight or curved staircases. However, a technology demonstration and general retail availability are two different stages. Until there is a confirmed date, price, and compatibility, it should be considered a proposal under development, not an available alternative for equipping any home.

The case of the Migo Ascender illustrates another necessary caution. The project generated expectations as a dedicated solution for cleaning steps, but the funding campaign ended with the contributed funds being refunded. A technically attractive idea may never reach stores due to manufacturing, certification, maintenance, or financing problems. In home robotics, a demonstration video proves that a mechanism works under certain conditions, not that it is ready to operate every day in thousands of homes.

What robots currently offer for multistory homes

In the absence of a transport platform, many current models can store separate maps for different levels. The user carries the robot to the relevant floor, selects the map in the app, and defines rooms, restricted areas, or zones that need an additional pass. The device recognizes the layout and does not have to relearn every room from scratch.

This option does not eliminate human intervention, but it solves an important part of the problem. A robot with LiDAR navigation or depth cameras can clean each floor using orderly routes, return to its starting point, and resume work after recharging. Cliff sensors prevent it from plunging down the stairs, although this protection has a defensive function: it prevents accidents, but does not turn the device into a vehicle capable of ascending.

For a multistory home, battery life and maintenance matter just as much as navigation. A battery of around 3,000 mAh may be sufficient for typical household sessions, but the floor area, floor type, and selected power level change the result. Stations that empty the dustbin, wash the mops, and dry them with hot air reduce daily work, although they usually take up considerable space and it is not always practical to install a complete base on every level.

The choice also depends on the layout. In a home with hard floors and few obstacles, a slim robot with good map memory may be more useful than a very powerful model. In homes with pets, anti-tangle brushes and object detection become important. Carpets require automatic mop lifting and sufficient suction to remove hair. The ability to change floors is only one part of the experience; everyday performance still depends on how well it recognizes and cleans each surface.

The technical challenges that remain

Energy autonomy is one of the main challenges. Climbing a staircase requires more force than moving across a flat surface, and the track system must move both its own structure and the robot it carries. Each journey consumes battery power and may reduce the time available for vacuuming. A truly autonomous platform needs to calculate whether it has enough energy to climb, work, return, and reach a charging base without becoming stranded halfway through the journey.

Environmental perception must also be extraordinarily reliable. Cameras and sensors need to distinguish the edge of a step from a shadow, a dark carpet, and a small object. Lighting changes between day and night; a staircase may have glass, reflections, or shiny surfaces. A navigation error in a hallway produces a minor impact. On a flight of stairs, it could damage the device, the home, or anyone nearby.

Mechanical wear will be another decisive factor. The tracks accumulate dust, hair, and fibers, while the brushes that clean the steps are exposed to constant friction. The platform must withstand hundreds or thousands of cycles without losing grip or precision. The real test will not be climbing a staircase at a trade show, but repeating the maneuver for years with the same level of safety.

Finally, there is the question of regulations and after-sales service. A heavy device that moves along stairs needs clear instructions, usage limits, and a repair network capable of servicing motors, sensors, and batteries. The manufacturer’s responsibility must be clearly defined if the home installation does not meet the recommended conditions. These issues usually receive less attention than speed or power, but they determine whether an innovation can become a reliable household appliance.

An important but still selective innovation

The arrival of the Cyber X marks a change because it transforms a trade-show promise into a solution with an announced price, compatibility, and launch schedule. Its approach does not attempt to turn every robot into a machine with legs, but rather to create a specialized platform that collects, protects, and deposits it on another floor. This architecture may be less spectacular than a robot that climbs by itself, but it offers a more realistic way to enter homes.

The proposal also makes the sector’s current state clear. Autonomous cleaning has advanced considerably on floors, around corners, with objects, and in mop maintenance, but stairs still require a combination of heavy engineering and highly precise sensors. The future of multilevel cleaning will probably not depend on a single solution: robots with separate maps, transport platforms, and more advanced mobility models will coexist.

For buyers, the difference between a demonstration and a useful product will lie in the details: compatibility with their robot, exact staircase dimensions, battery life, noise, maintenance, warranty, and total cost. The 1,199-euro system may open a new category, but it does not immediately turn every home into a completely automated space. For now, the staircase is no longer an absolute barrier and is instead becoming a testing ground, with a first commercial solution that will have to prove its value in daily life.

This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.

Most read