Magazine
How to reduce energy consumption in televisions and devices
Adjustments, habits, and real measurements to lower the bill without losing comfort or image.

A modern television can go from being a screen to becoming a small home command center, but also a silent expense that adds up hour by hour. Consumption does not depend only on the size of the panel or the imaging technology: brightness, HDR mode, standby time, built-in assistants, and connected devices completely change the final bill. In a house with multiple screens, consoles, soundbars, and players, the difference between a well-tuned setup and a neglected one eventually shows up on the bill.
If you have a problem with your television, you can use our free error code finder. From there you can find out and fix all errors easily and effectively.
The energy that slips away without a sound
Most of a television’s electricity cost does not appear in a single hit, but in the sum of small details. An OLED screen, for example, does not consume the same as a basic LED, and it does not behave the same if it plays a series in SDR as if it shows a movie in HDR with high brightness. Added to that is standby mode, which seems irrelevant at first glance, but repeats throughout the night, every day, for months.
Reference figures help put the matter into perspective. In a high-end 55-inch model, average consumption can be around 83 to 84 kWh per 1,000 hours in SDR and rise to about 114 kWh per 1,000 hours in HDR. Translated into everyday experience, that is approximately 0.084 kWh per hour in SDR and 0.114 kWh per hour in HDR. Standby, by contrast, usually sits at around 0.5 W, a low figure, but not zero: the kind of expense that seems insignificant until it is multiplied by 365 days.
The price of electricity adds another layer of variation. With a rate of 0.10 euros per kWh, one hour of viewing in SDR would cost around 0.0084 euros, while in HDR it would rise to 0.0114 euros. At 0.15 euros per kWh, those amounts go up to 0.0126 and 0.0171 euros. They are not amounts that stand out on a single day, but they do form a constant current, like a drop that never stops falling on the same stone.
What influences real consumption the most
Screen brightness remains one of the main culprits behind spending. The higher the light intensity, the harder the panels and the electronics that accompany them work. In very bright living rooms, the temptation is to turn everything up to maximum to compensate for the afternoon sun, but that pushes consumption upward without real need. The ambient light sensor, when available, helps precisely avoid that excess and adapts the image to the room with a precision that, in practice, is felt less on the bill than in visual comfort.
The use of advanced formats also matters. HDR requires more power than SDR because it seeks more intense highlights, brighter whites, and an image with a wider dynamic range. The result is eye-catching, yes, but it does not always make sense to keep it active at all times if the content source does not take advantage of it. Similarly, some image enhancement, motion, or sharpness systems can push the processor and panel to work harder than necessary, especially if they remain active without distinguishing between content types.
Size matters, although not always as users imagine. A larger screen consumes more, but the increase in spending is not linear or dramatic in every case. Two televisions of different sizes, but with similar panel technologies and settings, can end up closer than they seem if the smaller model is used at maximum brightness and the larger one remains well calibrated. Daily configuration ends up being as decisive as the inches.
Settings that reduce spending without ruining the picture
The most effective way to lower consumption is not to turn the screen off completely every minute, but to fine-tune what it does while it is on. Reducing overall brightness and enabling the automatic ambient light setting usually gives immediate results. In most homes, television looks better than it seems when the backlight is not forced; what many people interpret as better quality is often just a screen oversized for the room.
Another key point is the sleep timer. Current televisions allow you to set anything from 15 to 120 minutes so they switch off by themselves. It seems like a minor function, but it prevents many wasted hours when someone falls asleep in front of a series or leaves the room without turning off the remote. Real savings come from preventing repeated waste, not from obsessing over every watt.
On platforms like Google TV, programming can go even further: you can set the power-on time, the signal input, the DTT channel, and the initial volume. That flexibility lets the device adapt to specific routines rather than the other way around. If the television turns on only when needed, and for the right amount of time, it stops functioning as a permanent background in the home. That reduction in active time is one of the most effective levers for containing consumption.
Standby also counts, even if it is barely visible
Standby mode does not mean zero consumption. Modern televisions use only a fraction of a watt when they appear to be asleep, but that fraction remains alive day and night. In a device with 0.5 W of standby consumption, the annual expense is small, yes, but the figure stops being anecdotal when the living room ecosystem includes a set-top box, console, smart speaker, soundbar, and other accessories that remain ready for a remote command.
It is worth paying special attention to the peripherals that accompany the television. Many devices continue to consume electricity even when they are not playing anything. A soundbar in standby, a console in sleep mode, or a media player connected via HDMI can add up more than they seem to. The television is visible; the scattered consumption is not so much. That is why the most solid savings usually come from coordinating the whole setup, not just acting on the main screen.
Power strips with a switch help separate what is used from what is only plugged in out of habit. They are not miraculous, but they do offer a simple way to cut phantom consumption from several devices at once. In homes where the living room is used at specific times, turning off the audiovisual block completely may make more sense than leaving each piece quietly consuming all week long.
How much use hours cost and how that translates into euros
To understand the economic impact, you need to combine two data points: how much the device consumes and how much energy costs in each time period. If a television consumes 0.084 kWh per hour in SDR and electricity costs 0.10 euros per kWh, the cost stays at 0.0084 euros per hour. That is less than one cent per hour of normal picture, a very low amount on its own, but one that stops being low when several hours a day are accumulated throughout the year.
In HDR, the same device can go up to 0.114 kWh per hour. With the same price of 0.10 euros per kWh, the cost rises to 0.0114 euros per hour. If electricity rises to 0.15 euros per kWh, the difference becomes more visible: 0.0126 euros per hour in SDR and 0.0171 euros per hour in HDR. The jump does not seem brutal, although it is enough to reward those who review habits and do not leave the most demanding mode active through simple carelessness.
Standby mode, at about 0.00005 euros per hour at the same price of 0.10 euros per kWh, hardly moves the needle from one day to the next. But the correct reading is not to downplay it, but to integrate it into the rest of the system. A home does not get more expensive because of one screen on standby, but because of the sum of small consumptions piling up like dishes in a sink. Serious savings mean emptying that sink before it overflows.
| Mode | Approximate consumption | Cost at €0.10/kWh | Cost at €0.15/kWh | Practical reading |
|---|---|---|---|---|
| SDR | 0.084 kWh per hour | €0.0084 per hour | €0.0126 per hour | Normal use, contained expense |
| HDR | 0.114 kWh per hour | €0.0114 per hour | €0.0171 per hour | More brightness and greater panel demand |
| Standby | 0.0005 kWh per hour | €0.00005 per hour | €0.000075 per hour | Very low expense, but constant |
The devices that weigh most around the screen
Not all consumption comes from inside the television. Often, the problem lies in the constellation of devices around it. A console that never fully turns off, a smart speaker that stays listening, a streaming stick always ready to resume playback, or a set-top box with continuous update functions add load to the whole. Each one, separately, may seem harmless; together, they turn the room into a permanent consumption hub.
Power supplies and adapters that remain plugged in even when they are not charging anything also have an effect. For years that habit has been underestimated, but the accumulated effect is clear: electricity does not disappear because the cable hangs there without a phone at the end. If the goal is to reduce demand, the logic of disconnecting what is not being used remains one of the most effective and cheapest.
In televisions and living room devices, the key is to distinguish between convenience and excess. There are functions designed so everything responds instantly, and that has a cost. Fast startup, permanent signal detection, synchronization with other equipment, and automatic updates provide smoothness, but it is worth deciding which ones deserve to stay active all the time. The connected home works better when it does not confuse availability with necessity.
The value of calibration and smart use
A well-calibrated screen consumes less because it does not need to compensate for excesses. Lowering brightness slightly, reducing contrast to a reasonable level, and leaving picture mode on a balanced profile is usually enough to get comfortable viewing without forcing the panel. In a normal living room, with controlled light, the difference between a correct image and an exaggerated one is usually more aesthetic than functional.
Eco modes built into many manufacturers are not always perfect, but they do offer a useful starting point. They adjust power settings, standby behavior, and, in some cases, panel brightness according to the scene or the room light. They are small automations, but they help avoid the user making the same manual correction dozens of times. In energy matters, automating common sense is always good news.
Programming also helps organize the relationship with the screen. A television that turns on at a specific time for a specific task does not stay on out of habit. The routine changes and, with it, the expense. In family settings, you can even set a limited usage time for children, preventing the device from running as background noise for hours on end. In that kind of home, savings come not only from the kilowatt; also from the quiet discipline of the schedule.
A lighter bill starts with small habits
Reducing consumption in televisions and devices does not depend on a great heroic gesture, but on a sum of practical decisions. Less brightness when it is not needed, less time left on by inertia, fewer devices on standby, and more control over what remains powered even when nobody is looking at it. That combination, although modest, usually offers more consistent results than any promise of quick savings.
The picture changes even more when habits are observed over several months. A well-adjusted television, accompanied by rationalized peripherals and sensible programming, stops being a constant drain and becomes a predictable appliance. Energy, after all, works like water from a poorly closed tap: there is no need for a waterfall for the loss to be real. It is enough for the dripping to last too long.
At a time when screens are the center of leisure, work, and connection, saving does not require giving up comfort. It requires, rather, governing it precisely. Reducing consumption is a matter of control, not sacrifice. And in the living room, where everything invites you to go with the flow, that control is worth more than an isolated trick.
Coffee machine6 days agoPhilips coffee machine error 05: what it means and what to do
Coffee machine6 days agoSaeco coffee machine error 1: what it means and what to do
Magazine1 day agoReplacing boilers with heat pumps: CAE multipliers up to x6
Coffee machine6 days agoPhilips coffee machine error 1: causes and safe cleaning
Coffee machine7 days agoJura coffee machine error 8: what to do and repair costs
Fridge7 days agoLG fridge FF error: what it means and what to do
Coffee machine6 days agoJura coffee machine error 5: what it means and what to do
Magazine6 days agoXiaomi launches steam air fryer in Spain for €179.99
Daikin5 days agoDaikin heat pump error codes: meanings and safe checks
Coffee machine7 days agoSaeco error 5: causes and checks without taking it apart
Heat pump5 days agoMitsubishi Ecodan heat pump error codes: causes and fixes
Air fryer5 days agoCecotec air fryer E1 error: what to do safely





















