Hoover Dryer Error Codes

When your Hoover dryer starts acting up, it can be frustrating not knowing what’s going on. Thankfully, modern dryers are equipped with self-diagnostic systems that display error codes to help you identify and solve problems. These codes might seem like a random set of letters and numbers, but they’re actually key to understanding what’s wrong with your appliance.

Before we dive into the error code table, let’s clarify some terms you might come across:

  • NTC: Refers to a type of resistor that changes its value with temperature. It’s used in appliances to measure temperatures accurately.
  • Heater relay: An electrically operated switch that turns the dryer’s heating element on or off.
  • Thermistor: Similar to an NTC, it’s a temperature sensor that changes its resistance with temperature changes.
  • Control module: The “brain” of your dryer, an electronic unit that manages all the appliance’s functions.
  • Thermal cutout: A safety device that cuts power if it detects excessively high temperatures, to prevent damage or fires.

With these concepts in mind, we present you with a complete table of error codes for Hoover dryers, which will help you quickly identify the problem and find an appropriate solution.

ErrorDescriptionCauseSolution
E10Lack of loadThis error code will be displayed if the temperature exceeds 80°C which usually means that the dryer is being used empty. Make sure there is a load of clothes in the dryer.
E14Faulty rear NTCCheck rear NTC or thermistor. Verify connectors. Check wiring.
E15Heater relay faultyCheck heater relay. Check wiring. Verify heater.
E3Full tankCheck wiring. Check float mechanism. Check electronic controller.
E4Faulty program selectorCheck selector. Check control module.
E5NTC- temperature sensor open or shortCheck temperature sensor wiring. Check thermistor.
E6Main electronic control unit faultyReprogram the main electronic control unit. Replace the control unit.
E7Poor air circulationCheck for blockages. Control filters. Check condenser unit.
E8Faulty thermal fuseCheck the thermal fuse. Check wiring.
E9Faulty thermal cutoutThis fault should reset automatically, but if it doesn’t, then the thermal cutout is likely faulty. Check thermal cuts. Check wiring.

Our advice

Before calling for technical service, we recommend checking this table and following the suggested solutions. Many times, problems can be easily resolved without the need for professional intervention. However, if after trying the proposed solutions the problem persists, do not hesitate to contact a specialized technician.

Error codes in Hoover dryer

Error E9 in Hoover drying machine

Error E9 in Hoover drying machine

How to eliminate E9 error in HOOVER dryer? Error: E9Description: Defective thermal disjunctionCause: Solution: This failure must be restored automatically, but if it does not, then the thermal disjunct is ...
Error E8 in Hoover drying machine

Error E8 in Hoover drying machine

How to eliminate E8 error in HOOVER dryer? Error: E8Description: Defective thermal fuseCause: Solution: Check the thermal fuse check the wiring More tips If after following all the previous steps ...
Error E7 in Hoover drying machine

Error E7 in Hoover drying machine

How to eliminate E7 error in HOOVER dryer? Error: E7Description: Bad air circulationCause: Solution: Verify if there are block control blocks Check the condenser unit More tips If after following ...