Dehumidifier
DH 1655 by Orbegozo: running costs, operation and faults
What its 16-litre rating means, how much electricity it uses and how to tell a normal pause from a possible fault.

The DH 1655 by Orbegozo is a dehumidifier with an advertised extraction capacity of 16 litres per day, a 4-litre tank and a stated power rating of 230 W. That extraction figure is measured at 30°C and 80% relative humidity, not in every room. If it stops collecting water or switches off, a fault is not the only explanation: a full tank, the selected humidity setting and frost protection can all affect its behaviour.
If you have a problem with your dehumidifier, you can use our free error code finder. It can help you identify errors and find straightforward, effective ways to resolve them.
The 16-litre daily rating depends on the air entering the unit
A dehumidifier’s capacity is not a fixed daily water output. This model’s rating applies to specific conditions of 30°C and 80% relative humidity, meaning warm, very damp air. In a cooler home, or once humidity has fallen, the tank will normally take longer to fill. Comparing collected water alone can lead you to mistake an expected reduction in output for a fault.
The appliance uses a refrigeration circuit to cool a surface on which water vapour from the air condenses. The water then runs into the tank or continuous drain. Its refrigerant is R290, so it should not be confused with a small thermoelectric dehumidifier without a compressor. Both reduce moisture, but their capacities, electricity use and operating characteristics differ.
A day with heavy window condensation may produce more collected water than another seemingly similar day. Ventilation, laundry drying indoors and moisture held in walls and furniture also influence the result. Performance is better assessed by watching the humidity trend over a comparable period than by expecting the same number of litres every day.
Collecting less than 16 litres in 24 hours therefore does not, on its own, prove that the unit is defective. A more useful sign is whether humidity falls in the room where it operates. If it does not, check operating conditions and accessible air inlets before blaming the refrigeration circuit, without removing the casing.
Up to 100 square metres does not mean the whole home
The advertised coverage reaches 100 m², but that figure does not guarantee evenly reduced humidity in every home of that size. Air moves differently through an open room than through a property divided by corridors and doors. Ceiling height, temperature and the amount of moisture entering or being generated also matter.
Placing the unit in a hallway does not guarantee that enough air from the bedrooms will reach it. If one room still has misted windows while the appliance’s reading falls, the issue may be air circulation rather than extraction capacity. A separate hygrometer in that room can help reveal the difference without any work on the appliance.
Position it so that air can pass freely through the grilles, with no curtains, furniture or clothing covering them. Follow the unit’s manual for exact clearances; the available information does not establish a specific distance. Tucking it into a corner to hide it can restrict airflow and make the sensor measure a less representative environment than the rest of the room.
When deciding whether it suits a home, identifying where damp develops matters more than relying on the maximum advertised floor area. A closed bedroom, an open living room and a cold basement present different demands. The DH 1655 can help with condensation, but it does not repair water ingress, leaks or building defects that continuously introduce moisture.
The 230 W rating helps estimate energy use, not the exact bill
The stated power rating is 230 W, equivalent to 0.23 kW. If it maintained that demand for an hour, it would use 0.23 kWh. On the same assumption, eight hours would mean 1.84 kWh and 24 hours would total 5.52 kWh. These are calculations based on the stated rating, not measurements of a unit operating in a home.
To calculate the cost, multiply the kilowatt-hours by the electricity price that applies during that period. Without the tariff, there is no reliable daily monetary figure. Operation can also change when the appliance reaches the selected humidity or pauses; time switched on and time extracting are not necessarily the same.
Selecting a very low target may extend operating time without a proportionate improvement in comfort. If damp air constantly enters, the appliance is trying to offset a continually renewed moisture load. It is rather like drying a floor while the ceiling is still dripping: the source of moisture shapes both the result and the electricity use.
The available information provides neither a verifiable purchase price nor repair charges. An economic comparison with another model should consider the final purchase price, return terms and energy use under equivalent conditions. A low-consumption claim alone does not demonstrate better extraction efficiency than a different appliance.
Humidity settings and the timer affect how it operates
The LED panel allows a humidity setting between 30% and 90%. This range describes the available adjustment, not a recommendation to use either extreme. The selected target affects when the unit needs to keep removing water. If room humidity is already below the chosen value, a pause may be normal operation.
The number displayed needs to be interpreted according to what the panel is showing at that moment: the selected target is not the same as the ambient reading. Check the model’s manual for the exact button sequence and display indications. Otherwise, it is easy to mistake an unexpected setting for a malfunction.
The timer can schedule switching on or off up to 24 hours ahead. If the appliance stops at a similar time or fails to start when expected, check this programming before assuming a fault. Do not assume it retains or restores settings after a power cut, as the available information does not confirm that behaviour.
There are also two fan speeds and an automatically oscillating vertical louvre that closes when the unit is switched off. These features affect airflow and perceived noise, but they do not turn it into an air conditioner. Its main purpose is to remove moisture from the air, not deliver a selectable cooling temperature.
The tank explains many stops that are not faults
The tank has a 4-litre capacity, a water-level window and a full indicator linked to automatic shutdown. An appliance that stops with a full tank may therefore be working correctly. Emptying and replacing it as instructed in the manual is an accessible check, with the unit stopped and care taken not to spill water over it.
Tank capacity should not be confused with daily extraction capacity. At the nominal rate of 16 litres in 24 hours, a 4-litre tank would represent roughly six hours of collection. This is an indicative mathematical relationship, not a prediction of when the warning will appear, since extraction varies with room conditions and operating pauses.
If the warning remains with an empty tank, check that the tank is seated correctly and that there is no visible dirt in its accessible housing. Do not force parts or bypass mechanisms to make the unit start. A protection system that will not release needs technical assessment if correct tank positioning does not resolve the issue.
The model includes a continuous drainage connection, useful when water needs to drain away without repeated tank emptying. This does not confirm that it includes a pump or can lift water to any drain. Before buying accessories or planning an installation, check the permitted route and manual requirements; a drain connection does not automatically mean it can discharge upwards.
When little water is collected, conditions matter more than the tank
If the fan runs but little water appears, consider room temperature and actual humidity. Drier air contains less available water vapour to condense, while cold conditions can reduce the performance of a compressor-based appliance. The advertised frost-protection system protects operation against ice formation, but it does not remove these physical limitations.
A pause associated with that protection does not, by itself, prove a fault. Nor does the feature mean the appliance can be used at any temperature. The supplied information does not safely establish the complete operating range, so check the relevant limit in the manual and unit documentation rather than inferring it from the temperature used for the extraction test.
A dirty dust filter and blocked grilles restrict airflow. With the appliance switched off and unplugged, inspect accessible areas and clean the filter as instructed. It must be completely dry before refitting. Do not insert tools through the grilles or remove panels to reach internal components.
A low reading beside the unit and a high reading elsewhere do not automatically identify a faulty sensor. Position, air currents and differences between instruments can all play a part. Before buying a replacement part, establish whether the issue persists under comparable conditions; a symptom does not identify a component or justify replacement without diagnosis.
Noise and dimensions also need context
The product description consulted gives a maximum noise level of 38 dB, but does not explain the measurement conditions. That number does not guarantee the unit will be unnoticeable in a quiet bedroom or allow comparison with every figure published for another appliance. The compressor, fan and vibration transmitted through the floor create different sensations.
A stable, level position without contact with furniture can help prevent external resonance. If a new knocking noise or distinctly different vibration develops, check the position and tank seating without opening the unit. If it persists, an inspection is appropriate; a sudden change in sound should not be dismissed simply because the model has a compressor.
The available listings place its dimensions at approximately 35 cm wide, 49 cm high and 23.5 to 24 cm deep. Weights of both 9.82 and 9.9 kg appear. These are small differences in presentation or rounding, but they matter if you intend to fit it into a tight space, where room for airflow must also be allowed.
The handle and wheels make moving it between rooms easier, while the cable storage and plug holder help when putting it away. Emptying the tank before moving it helps prevent spills. If it has travelled on its side or its transport position is unknown, follow the waiting time in the manual before switching it on, rather than applying a generic delay from another model.
Accessible cleaning has a clear boundary
The DH 1655 has a washable dust filter. Cleaning it supports airflow, but does not disinfect an entire room or turn the appliance into an air purifier with unverified filtration capabilities. There is also no basis for claiming specific allergen removal simply because it collects visible dust.
Cleaning frequency depends on use, the amount of dirt in the environment and the manufacturer’s instructions. Household maintenance should be limited to the removable filter and surfaces intended for cleaning. Do not direct water towards the panel, grilles or interior, and only use products permitted by the manual.
The collected water comes from condensation, but may come into contact with dust and internal surfaces. It should not be regarded as drinking water or used for consumption. Emptying and keeping the tank clean prevents water from standing unnecessarily; a clear appearance does not establish that it is safe to drink.
R290 is a flammable refrigerant, and only authorised personnel should work on its circuit. Casing damage after an impact or signs of internal damage are not matters for household testing. Avoid further operation until professional advice is obtained, and do not puncture, heat or attempt to repair the refrigeration circuit.
Display information must apply to this particular model
The reference material does not include a verifiable list of error codes for the DH 1655. It would therefore be inaccurate to assign meanings taken from other dehumidifiers, even if they share a brand or appearance. A tank-full warning should not automatically be treated as an electronic fault either.
For an unfamiliar indication, record the exact display text, note when it appears and locate the manual matching the model reference on the identification plate. A photograph can prevent confusion between letters and numbers. This information helps distinguish an operating signal from an issue requiring diagnosis.
If it will not switch on, check the visible condition of the cable, tank positioning and accessible settings without dismantling anything. A damaged cable, burning smell, smoke or tripping electrical protection means use must stop. Do not open the appliance, interfere with the socket or persist with repeated resets when these warning signs occur.
If external checks do not explain the problem, an authorised technician should inspect it. Keep the purchase receipt and check warranty terms before approving work. Opening the unit is not a harmless test: it introduces risks and can complicate damage assessment; the scope of cover needs confirmation rather than assumption.
The deciding factor is whether it controls actual humidity
The practical value of this dehumidifier lies in lowering humidity where needed, with electricity use and noise that suit the home. The 4-litre tank, digital adjustment and continuous drainage add convenience, but extraction and coverage figures must be read alongside their operating conditions, not as a promise independent of the environment.
If you already own it, a stop explained by the tank or humidity setting does not justify buying another appliance. If repairs are needed, obtain a diagnosis and establish what the quote includes before comparing repair with replacement. Clarify whether the call-out and assessment are charged separately; there is no universal rule that allows you to assume they are included.
The final comparison should consider the appliance’s overall condition, the confirmed total cost and whether the damp problem persists. A new machine will not fix water entering through a wall either. When the DH 1655 operates under suitable conditions and humidity falls, collecting less water over time may be precisely the sign that it is doing its job.
This article contains affiliate links: if you buy through them, we earn a small commission at no extra cost to you. More information.
Magazine5 days agoReplacing boilers with heat pumps: CAE multipliers up to x6
Magazine6 hours agoWashing machine smells? Clean the seal and leave the door open
Dishwasher6 days agoIndesit dishwasher errors: codes, lights and safe checks
Fridge5 days agoLiebherr refrigerator errors: codes, alarms and solutions
Candy6 days agoCandy tumble dryer error codes: warnings and safe checks
AEG5 days agoAEG tumble dryer error codes: what they mean and what to do
Oven5 days agoSiemens oven error codes: meanings and safe solutions
Magazine7 days agoHow much a tumble dryer cycle costs in winter, by technology
Oven5 days agoSamsung oven error codes: meanings and safe solutions
Dishwasher6 days agoHaier dishwasher error codes: meanings and solutions
Magazine4 days agoGas inspection every 5 years and boiler service every 2 years
Coffee machine4 days agoSaeco coffee machine errors: codes, causes and solutions




















